Re: [Serusers] radius error

hi i have installed ser with acc/mysql/radius module while registering a user 'm getting the following error message can somebody please point me as to what is wrong and where rad_recv: Access-Request packet from host myhost:33532, id=69, length=294 Thread 3 assigned request 2 Waking up in 2 seconds... Thread 3 handling request 2, (1 handled so far) User-Name = "sip:test@myhost" Digest-Attributes = "\n\034sip:test@myhost" Digest-Attributes = "\001\023myhost" Digest-Attributes = "\002*3f338410ec3d4e634e2883b85928416ef3c364e5" Digest-Attributes = "\004\027sip:myhost" Digest-Attributes = "\003\nREGISTER" Digest-Attributes = "\005\006auth" Digest-Attributes = "\t\n00000001" Digest-Attributes = "\010"34555301336645129540719731434531" Digest-Response = "acdd6400b4c16da2a04f85334d871415" Service-Type = IAPP-Register SIP-URI-User = "test" NAS-IP-Address = 127.0.0.1 NAS-Port = 5060 auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user auth: Failed to validate the user. Delaying request 2 for 1 seconds Finished request 2 FYI- OS- RH 7.2 SER- latest from cvs with acc/mysql and radius RADIUS- freeradius ------------------------------------ser.cfg--------------------------------- # # $Id: ser.cfg,v 1.21 2003/06/04 13:47:36 jiri Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=no log_stderror=yes # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" mhomed=yes listen=myhost # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" loadmodule "/usr/local/lib/ser/modules/uri.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/acc.so" modparam("usrloc", "db_mode", 1) modparam("auth_radius", "radius_config","/usr/local/etc/radiusclient/radiusclient.conf") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("acc", "log_level", 1) modparam("acc", "radius_flag", 1) # ------------------------- request routing logic ------------------- # main routing logic alias=myhost route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # if (loose_route()) { # t_relay(); # break; # }; # # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri=~"myhost") { if (method=="REGISTER") { log(1, "REGISTER: Authenticating user\n"); if (!radius_www_authorize("")) { log(1, "REGISTER: challenging user\n"); www_challenge("", "1"); break; }; save("location"); break; }; if (method=="INVITE") { log(1, "INVITE\n"); setflag(1); /* set for accounting (the same value as in log_flag!) */ }; if (method=="MESSAGE") { log(1, "MESSAGE\n"); setflag(1); /* set for accounting (the same value as in log_flag!) */ }; if (method=="BYE" || method=="CANCEL") { log (1, "BYE or CANCEL\n"); setflag(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; #}; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; }; } -------------------------------------------end---------------------------------------------------------- i dunno what is wrong here..if you need any other config files to help me out please let me know regards, Madan _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers