Re: [OpenSER-Users] OpenSER sending 483: Too many Hops

Hi, If anybody can take a look openser.cfg below. I`m working vmware (enviroments virtual)...Whenever I try a "register" a client I get 483: Too many Hops....as if he had a loop (config file) but I am unable to find the problem... I use OpenSER 1.3-notls, client softphone: twincle or xlite... OpenSER - 192.168.0.10 <http://192.168.0.10> Client - 192.168.0.25 <http://192.168.0.25> Bind9/named.conf(SRV, A): spo.voip.br <http://spo.voip.br> Does anyone know how to fix this ? Any hints.....?? thx... *OpenSER File:* ** ####### Global Parameters ######### alias="vmw02-srv.spo.voip.br <http://vmw02-srv.spo.voip.br>" debug=6 log_stderror=no log_facility=LOG_LOCAL0 log_name="Openser" fork=yes children=8 tcp_children=4 group="openser" user="openser" /* uncomment the following lines to enable debugging */ #debug=6 #fork=no #log_stderror=yes /* uncomment the next line to disable TCP (default on) */ disable_tcp=yes /* uncomment the next line to enable the auto temporary blacklisting of not available destinations (default disabled) */ #disable_dns_blacklist=no /* uncomment the next line to enable IPv6 lookup after IPv4 dns lookup failures (default disabled) */ #dns_try_ipv6=yes /* uncomment the next line to disable the auto discovery of local aliases based on revers DNS on IPs (default on) */ #auto_aliases=no /* uncomment the following lines to enable TLS support (default off) */ #disable_tls = no #listen = tls:your_IP:5061 #tls_verify_server = 1 #tls_verify_client = 1 #tls_require_client_certificate = 0 #tls_method = TLSv1 #tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem" #tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem" #tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem" port=5060 /* uncomment and configure the following line if you want openser to bind on a specific interface/port/proto (default bind on all available) */ #listen=udp:192.168.1.2:5060 <http://192.168.1.2:5060> listen=udp:192.168.0.10:5060 <http://192.168.0.10:5060> ####### Modules Section ######## #set module path mpath="/usr/local/lib/openser/modules/" /* uncomment next line for MySQL DB support */ loadmodule "mysql.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" modparam("maxfwd", "max_limit", 256) loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "mi_fifo.so" loadmodule "uri_db.so" loadmodule "uri.so" loadmodule "xlog.so" loadmodule "acc.so" loadmodule "avpops.so" /* uncomment next lines for MySQL based authentication support NOTE: a DB (like mysql) module must be also loaded */ loadmodule "auth.so" loadmodule "auth_db.so" /* uncomment next line for aliases support NOTE: a DB (like mysql) module must be also loaded */ loadmodule "alias_db.so" /* uncomment next line for multi-domain support NOTE: a DB (like mysql) module must be also loaded NOTE: be sure and enable multi-domain support in all used modules (see "multi-module params" section ) */ loadmodule "domain.so" /* uncomment the next two lines for presence server support NOTE: a DB (like mysql) module must be also loaded */ #loadmodule "presence.so" #loadmodule "presence_xml.so" # ----------------- setting module-specific parameters --------------- # ----- mi_fifo params ----- modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo") # ----- rr params ----- # add value to ;lr param to cope with most of the UAs modparam("rr", "enable_full_lr", 1) # do not append from tag to the RR (no need for this script) #modparam("rr", "append_fromtag", 0) # ----- rr params ----- #modparam("registrar", "method_filtering", 1) /* uncomment the next line to disable parallel forking via location */ # modparam("registrar", "append_branches", 0) /* uncomment the next line not to allow more than 10 contacts per AOR */ #modparam("registrar", "max_contacts", 10) # ----- uri_db params ----- /* by default we disable the DB support in the module as we do not need it in this configuration */ modparam("uri_db", "use_uri_table", 0) modparam("uri_db", "db_url", "") # ----- acc params ----- /* what sepcial events should be accounted ? */ modparam("acc", "early_media", 1) modparam("acc", "report_ack", 1) modparam("acc", "report_cancels", 1) /* by default ww do not adjust the direct of the sequential requests. if you enable this parameter, be sure the enable "append_fromtag" in "rr" module */ modparam("acc", "detect_direction", 0) /* account triggers (flags) */ modparam("acc", "failed_transaction_flag", 3) modparam("acc", "log_flag", 1) modparam("acc", "log_missed_flag", 2) /* uncomment the following lines to enable DB accounting also */ modparam("acc", "db_flag", 1) modparam("acc", "db_missed_flag", 2) # ----- usrloc params ----- #modparam("usrloc", "db_mode", 0) /* uncomment the following lines if you want to enable DB persistency for location entries */ modparam("usrloc", "db_mode", 2) modparam("usrloc", "db_url", "mysql://openser:openserrw@192.168.0.10/openser") modparam("usrloc", "user_column", "username") modparam("usrloc", "domain_column", "domain") modparam("usrloc", "contact_column", "contact") modparam("usrloc", "expires_column", "expires") modparam("usrloc", "q_column", "q") modparam("usrloc", "callid_column", "callid") modparam("usrloc", "cseq_column", "cseq") modparam("usrloc", "methods_column", "methods") modparam("usrloc", "flags_column", "flags") modparam("usrloc", "user_agent_column", "user_agent") modparam("usrloc", "received_column", "received") modparam("usrloc", "socket_column", "socket") modparam("usrloc", "use_domain", 0) modparam("usrloc", "desc_time_order", 0) modparam("usrloc", "timer_interval", 60) modparam("usrloc", "matching_mode", 0) modparam("usrloc", "cseq_delay", 20) # ----- auth_db params ----- /* uncomment the following lines if you want to enable the DB based authentication */ #modparam("auth_db", "calculate_ha1", yes) #modparam("auth_db", "password_column", "password") modparam("auth_db", "db_url", "mysql://openser:openserrw@192.168.0.10/openser") #modparam("auth_db", "load_credentials", "") # ----- alias_db params ----- /* uncomment the following lines if you want to enable the DB based aliases */ modparam("alias_db", "db_url", "mysql://openser:openserrw@192.168.0.10/openser") # ----- domain params ----- /* uncomment the following lines to enable multi-domain detection support */ modparam("domain", "db_url", "mysql://openser:openserrw@192.168.0.10/openser") modparam("domain", "db_mode", 1) # Use caching # ----- multi-module params ----- /* uncomment the following line if you want to enable multi-domain support in the modules (dafault off) */ modparam("alias_db|auth_db|usrloc|uri_db", "use_domain", 1) # ----- presence params ----- /* uncomment the following lines if you want to enable presence */ #modparam("presence|presence_xml", "db_url", # "mysql://openser:openserrw@192.168.1.3/openser_1_3") #modparam("presence_xml", "force_active", 1) #modparam("presence", "server_address", "sip:192.168.1.2:5060 <http://192.168.1.2:5060>") ####### Routing Logic ######## # main request routing logic route{ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; } if (has_totag()) { # sequential request withing a dialog should # take the path determined by record-routing if (loose_route()) { if (is_method("BYE")) { setflag(1); # do accouting ... setflag(3); # ... even if the transaction fails } route(1); } else { sl_send_reply("404","Not here"); } exit; } #initial requests # CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) t_relay(); exit; } t_check_trans(); # DESCOMENTEI O BLOCO IF{} # authenticate if from local subscriber (uncomment to enable auth) if (!(method=="REGISTER") && from_uri==myself) { if (!proxy_authorize("", "subscriber")) { proxy_challenge("", "0"); exit; } if (!check_from()) { sl_send_reply("403","Forbidden auth ID"); exit; } consume_credentials(); # caller authenticated } # record routing if (!is_method("REGISTER|MESSAGE")) record_route(); # account only INVITEs if (is_method("INVITE")) { setflag(1); # do accouting } if (!uri==myself) /* replace with following line if multi-domain support is used */ ##if (!is_uri_host_local()) { append_hf("P-hint: outbound\r\n"); # if you have some interdomain connections via TLS ##if($rd=="tls_domain1.net") { ## t_relay("tls:domain1.net <http://domain1.net>"); ## exit; ##} else if($rd=="tls_domain2.net") { ## t_relay("tls:domain2.net <http://domain2.net>"); ## exit; ##} route(1); } # requests for my domain /* uncomment this if you want to enable presence server and comment the next 'if' block NOTE: uncomment also the definition of route[2] from below */ ##if( is_method("PUBLISH|SUBSCRIBE")) ## route(2); if (is_method("PUBLISH")) { sl_send_reply("503", "Service Unavailable"); exit; } if (is_method("REGISTER")) { # ACRESCENTEI O IP ADDR - MRG # authenticate the REGISTER requests (uncomment to enable auth) #if (!www_authorize("vmw02-srv", "subscriber")) #{ # www_challenge("vmw02-srv", "0"); # exit; #} # #if (!check_to()) ##{ ## sl_send_reply("403","Forbidden auth ID"); ## exit; ##} if (!save("location")) sl_reply_error(); exit; } if ($rU==NULL) { # request with no Username in RURI sl_send_reply("484","Address Incomplete"); exit; } # apply DB based aliases (uncomment to enable) alias_db_lookup("dbaliases"); if (!lookup("location")) { switch ($retcode) { case -1: case -3: t_newtran(); t_reply("404", "Not Found"); exit; case -2: sl_send_reply("405", "Method Not Allowed"); exit; } } # when routing via usrloc, log the missed calls also setflag(2); route(1); } route[1] { # for INVITEs enable some additional helper routes if (is_method("INVITE")) { t_on_branch("2"); t_on_reply("2"); t_on_failure("1"); } if (!t_relay()) { sl_reply_error(); }; exit; } # Presence route /* uncomment the whole following route for enabling presence NOTE: do not forget to enable the call of this route from the main route */ ##route[2] ##{ ## if (!t_newtran()) ## { ## sl_reply_error(); ## exit; ## }; ## ## if(is_method("PUBLISH")) ## { ## handle_publish(); ## t_release(); ## } ## else ## if( is_method("SUBSCRIBE")) ## { ## handle_subscribe(); ## t_release(); ## } ## ## exit; ##} branch_route[2] { xlog("new branch at $ru\n"); } onreply_route[2] { xlog("incoming reply\n"); } failure_route[1] { if (t_was_cancelled()) { exit; } # uncomment the following lines if you want to block client # redirect based on 3xx replies. ##if (t_check_status("3[0-9][0-9]")) { ##t_reply("404","Not found"); ## exit; ##} # uncomment the following lines if you want to redirect the failed # calls to a different new destination ##if (t_check_status("486|408")) { ## sethostport("192.168.2.100:5060 <http://192.168.2.100:5060>"); ## append_branch(); ## # do not set the missed call flag again ## t_relay(); ##} } *Ngrep -d eth1 -qt -W byline port 5060* root@vmw02-srv:~# ngrep -d eth1 -qt -W byline port 5060 interface: eth1 (192.168.0.0/255.255.255.0 <http://192.168.0.0/255.255.255.0>) filter: (ip or ip6) and ( port 5060 ) U 2008/03/20 13:57:31.763060 192.168.0.25:5060 <http://192.168.0.25:5060> -> 192.168.0.10:5060 <http://192.168.0.10:5060> REGISTER sip:spo.voip.br <http://spo.voip.br> SIP/2.0. Via: SIP/2.0/UDP 192.168.0.25 <http://192.168.0.25>;rport;branch=z9hG4bKignjupsg. Max-Forwards: 70. To: "vmwcli03" <sip:vmwcli03@spo.voip.br <mailto:sip:vmwcli03@spo.voip.br>>. From: "vmwcli03" <sip:vmwcli03@spo.voip.br <mailto:sip:vmwcli03@spo.voip.br>>;tag=dcoan. Call-ID: iswtwciijecswfp(a)192.168.0.25 <mailto:iswtwciijecswfp@192.168.0.25>. CSeq: 883 REGISTER. Contact: <sip:vmwcli03@192.168.0.25 <mailto:sip:vmwcli03@192.168.0.25>>;expires=3600. Allow: INVITE,ACK,BYE,CANCEL,OPTIONS,PRACK,REFER,NOTIFY,SUBSCRIBE,INFO. User-Agent: Twinkle/1.0. Content-Length: 0. . U 2008/03/20 13:57:32.333159 192.168.0.25:5060 <http://192.168.0.25:5060> -> 192.168.0.10:5060 <http://192.168.0.10:5060> REGISTER sip:spo.voip.br <http://spo.voip.br> SIP/2.0. Via: SIP/2.0/UDP 192.168.0.25 <http://192.168.0.25>;rport;branch=z9hG4bKignjupsg. Max-Forwards: 70. To: "vmwcli03" <sip:vmwcli03@spo.voip.br <mailto:sip:vmwcli03@spo.voip.br>>. From: "vmwcli03" <sip:vmwcli03@spo.voip.br <mailto:sip:vmwcli03@spo.voip.br>>;tag=dcoan. Call-ID: iswtwciijecswfp(a)192.168.0.25 <mailto:iswtwciijecswfp@192.168.0.25>. CSeq: 883 REGISTER. Contact: <sip:vmwcli03@192.168.0.25 <mailto:sip:vmwcli03@192.168.0.25>>;expires=3600. Allow: INVITE,ACK,BYE,CANCEL,OPTIONS,PRACK,REFER,NOTIFY,SUBSCRIBE,INFO. User-Agent: Twinkle/1.0. Content-Length: 0. . U 2008/03/20 13:57:33.321952 192.168.0.25:5060 <http://192.168.0.25:5060> -> 192.168.0.10:5060 <http://192.168.0.10:5060> REGISTER sip:spo.voip.br <http://spo.voip.br> SIP/2.0. Via: SIP/2.0/UDP 192.168.0.25 <http://192.168.0.25>;rport;branch=z9hG4bKignjupsg. Max-Forwards: 70. To: "vmwcli03" <sip:vmwcli03@spo.voip.br <mailto:sip:vmwcli03@spo.voip.br>>. From: "vmwcli03" <sip:vmwcli03@spo.voip.br <mailto:sip:vmwcli03@spo.voip.br>>;tag=dcoan. Call-ID: iswtwciijecswfp(a)192.168.0.25 <mailto:iswtwciijecswfp@192.168.0.25>. CSeq: 883 REGISTER. Contact: <sip:vmwcli03@192.168.0.25 <mailto:sip:vmwcli03@192.168.0.25>>;expires=3600. Allow: INVITE,ACK,BYE,CANCEL,OPTIONS,PRACK,REFER,NOTIFY,SUBSCRIBE,INFO. User-Agent: Twinkle/1.0. Content-Length: 0. . *U 2008/03/20 13:57:35.309584 192.168.0.25:5060 <http://192.168.0.25:5060> -> 192.168.0.10:5060 <http://192.168.0.10:5060>* *REGISTER sip:spo.voip.br <http://spo.voip.br> SIP/2.0.* Via: SIP/2.0/UDP 192.168.0.25 <http://192.168.0.25>;rport;branch=z9hG4bKignjupsg. Max-Forwards: 70. To: "vmwcli03" <sip:vmwcli03@spo.voip.br <mailto:sip:vmwcli03@spo.voip.br>>. From: "vmwcli03" <sip:vmwcli03@spo.voip.br <mailto:sip:vmwcli03@spo.voip.br>>;tag=dcoan. Call-ID: iswtwciijecswfp(a)192.168.0.25 <mailto:iswtwciijecswfp@192.168.0.25>. CSeq: 883 REGISTER. Contact: <sip:vmwcli03@192.168.0.25 <mailto:sip:vmwcli03@192.168.0.25>>;expires=3600. Allow: INVITE,ACK,BYE,CANCEL,OPTIONS,PRACK,REFER,NOTIFY,SUBSCRIBE,INFO. User-Agent: Twinkle/1.0. Content-Length: 0. . *U 2008/03/20 13:57:37.026703 192.168.0.10:5060 <http://192.168.0.10:5060> -> 192.168.0.25:5060 <http://192.168.0.25:5060>* *SIP/2.0 483 Too Many Hops.* Via: SIP/2.0/UDP 192.168.0.25 <http://192.168.0.25>;rport=5060;branch=z9hG4bKignjupsg. To: "vmwcli03" <sip:vmwcli03@spo.voip.br <mailto:sip:vmwcli03@spo.voip.br>>;tag=1333af5435552d3677a0ca954c3a6e9f.6889. From: "vmwcli03" <sip:vmwcli03@spo.voip.br <mailto:sip:vmwcli03@spo.voip.br>>;tag=dcoan. Call-ID: iswtwciijecswfp(a)192.168.0.25 <mailto:iswtwciijecswfp@192.168.0.25>. CSeq: 883 REGISTER. Server: OpenSER (1.3.0-notls (i386/linux)). Content-Length: 0. ------------------------------------------------------------------------ _______________________________________________ Users mailing list Users(a)lists.openser.org http://lists.openser.org/cgi-bin/mailman/listinfo/users