3 Dec
2003
3 Dec
'03
4:10 p.m.
I have observed that, if I run the voicemail config seperately with port
5060, the call is directly going to the voicemail. But if I change the port
to any other, it is not working!! I believe this might be the reason I am
not able to transfer to the voicemail when I run two instances of SER? Also,
in the sems.conf, the fifo file is /tmp/ser_fifo. Now, if I run 2 instances,
shouldnt we add two lines in the sems.conf?
-----Original Message-----
From: Nils Ohlmeier [mailto:nils@iptel.org]
Sent: Tuesday, December 02, 2003 3:55 PM
To: sesha(a)iic.com
Cc: serusers
Subject: Re: [Serusers] Re: voicemail config
On Tuesday 02 December 2003 21:56, Sesha B wrote:
interface
Oops.. I have the second fifo as /tmp/vm_ser_fifo. I
was just messing
around changing those while I was testing. So, it is not working with a
different fifo too.
I dont know if it is messed too, but ser.cfg contains 'fork=no', which means
that this Ser instance will only listen on the first interface (normaly the
loopback interface).
Nils
-----Original Message-----
From: Nils Ohlmeier [mailto:nils@iptel.org]
Sent: Tuesday, December 02, 2003 3:44 PM
To: sesha(a)iic.com
Cc: serusers
Subject: Re: [Serusers] Re: voicemail config
I guess your second Ser is not starting, because then path and name of the
fifo is the same for both Ser instances.
Nils
On Tuesday 02 December 2003 21:27, Sesha B wrote:
on
Yeah, I'm listening on the loopback. I
observed something interesting.
When
I stop the first instance, the second instance
(Which earlier used to go
to
the voicemail directly), is also not working. It
works only if I change
the
port back to 5060 on the second instance of SER.
I dont understand where
I am doing wrong. I'm attaching my ser.cfg and ser-vm.cfg. Please help.
Thank
you.
-----Original Message-----
From: Nils Ohlmeier [mailto:nils@iptel.org]
Sent: Tuesday, December 02, 2003 2:33 PM
To: sesha(a)iic.com; Jan Janak; Mario Kolberg
Cc: Klaus Darilion; serusers
Subject: Re: [Serusers] Re: voicemail config
On Tuesday 02 December 2003 20:35, Sesha B wrote:
> I am running two instances of SER on the same machine. One is the
regular
> > config running on 5060 and the other is the voicemail config running > > 5090. I also have a different fifo file for
both of the configs. I
dont
see
> any traffic on the port 5090 at all. I mean, the call is not forwarded
to
> > the voicemail. Please help. Thank you.
>
> Are you sure that you listen on the correct interface? Loopback in this case,
e.g. 'ngrep -d lo port 5090'.
Regards
Nils
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers