27 Jun
2003
27 Jun
'03
7:54 p.m.
Jan,
My SER SIP server works fine with the default config script. As soon as I
add some simple static routing such as:
if (uri=~"^sip:9[0-9]*@rtcsol.local) {
forward( 159.63.73.165, 5060 );
to the script and restart ser, my log looks like the attached. There is a
ser process running but it is not normal and no network SIP ports ie 5060
are opened.
The command line returns:
[root@FFDCTSERSIP ser]# /etc/rc.d/init.d/ser stop
Stopping ser: [ OK ]
[root@FFDCTSERSIP ser]#
[root@FFDCTSERSIP ser]# /etc/rc.d/init.d/ser start
Starting ser: Terminated
[root@FFDCTSERSIP ser]#
[root@FFDCTSERSIP ser]# /etc/rc.d/init.d/ser status
ser (pid 7309) is running...
[root@FFDCTSERSIP ser]#
I'm running the 0.8.11pre29 for test bed only on a Red Hat 9 system. What
could I be doing wrong?
Paul
-----Original Message-----
From: Jan Janak [mailto:jan@iptel.org]
Sent: Thursday, June 26, 2003 2:02 PM
To: Wasik, Paul
Cc: serusers(a)lists.iptel.org
Subject: Re: [Serusers] Need Routing Help
Edit your configuration file and set log_stderror to yes. By default the
server uses syslog to do the output so you will find it in
/var/log/messages or /var/log/daemon (depending on your distribution).
If you set the variable then ser will output all messages to the
standard output.
Jan.
On 26-06 14:01, Wasik, Paul wrote:
Jan,
I don't see any error output on the command line. Is there a log file
somewhere? All I see is "Terminated" when attempting to start SER.
Paul
-----Original Message-----
From: Jan Janak [mailto:jan@iptel.org]
Sent: Thursday, June 26, 2003 1:58 PM
To: Wasik, Paul
Cc: serusers(a)lists.iptel.org
Subject: Re: [Serusers] Need Routing Help
Hello,
and what is the problem ? If your ser doesn't start anymore then your
configuration file contains some mistake. In that case the output of ser
tells you on what line the mistake is, for example:
0(6704) parse error (75,36-37): syntax error
0(6704) parse error (75,36-37): invalid route statement
0(6704) parse error (75,38-39):
ERROR: bad config file (3 errors)
means that there is an error on line 75 of the configuration file.
Jan.
On 26-06 13:53, Wasik, Paul wrote:
is
Hi all,
I've got SER running on a Red Hat 9 platform. I've got MySQL and serweb
working and using the default ser.cfg file I can register UAs and make
local
calls within the proxy. What I have not been able
to do is get routing /
dial plan stuff to work via a Cisco SIP gateway. I cannot get SER to run
once I add any routing information to the ser.cfg script. I tried
following
> the examples like the following from the "How to" guide:
>
> # attempt handoff to PSTN
> if (uri=~"^sip:9[0-9]*@mydomain.com") { ## This assumes that the caller
> log("Forwarding to PSTN\n"); ## registered in our realm
> t_relay_to( "192.168.0.2", "5060"); ## Our Cisco router
> break;
> };
> Anyone have any ser.cfg script files that work succesfully for simple
dial
> plan / routing to a SIP gatewat they could share?
I'm having a hard time
> with the routing.
> Thanks,
> Paul
>
>
> _______________________________________________
> Serusers mailing list
> serusers(a)lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers