[Serusers] sems + ser = trouble !! @@"

---------- Forwarded message ---------- From: Carl <s9134131(a)gmail.com> Date: 2005/7/19 上午 11:51 Subject: sems + ser = trouble !! @@" To: serusers(a)iptel.org hi everybody: i have a ser + sems system. but there are some questions troubled me. i don't know what my system happened! now i have some question: 1.my voicemail can record voice message, but i can't listen the voice before i left message(tell that you can begin talking). 2.my ser is always forward all calls into voicemail, even if receiver is online. i dont know how to confige ser.cfg, can anyone help me ? 3.there are some messages like this , what's going on ? (5208) WARNING: reloadModuleConfig (SemsConfiguration.cpp:66): no configuration found for module isdngw, maybe you want to specify config.isdngw in config file. (5208) WARNING: sig_usr (sems.cpp:75): signal 2 received (5207) WARNING: sig_usr (sems.cpp:75): signal 2 received (5207) WARNING: sig_usr (sems.cpp:75): signal 17 received thanks, Carl the following are my ser.cfg and sems.conf #-------------------------------------------------------------------------------------------------- # # $Id: ser.cfg,v 1.21 2003/06/04 13:47:36 jiri Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) #Uncomment these lines to enter debugging mode /* debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/vm.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # -- vm params -- modparam("voicemail", "db_url","mysql://ser:heslo@localhost/ser") modparam("voicemail", "subscriber_table", "subscriber") modparam("voicemail", "email_column", "email_address") # ------------------------- request routing logic ------------------- # main routing logic route{ log(1, "entering main loop\n"); if (method=="REGISTER") log(1, "REGISTER message received\n"); if (method=="INVITE") log(1, "INVITE message received\n"); if (method=="ACK") log(1, "ACK message received\n"); if (method=="BYE") log(1, "BYE message received\n"); if (method=="CANCEL") log(1, "CANCEL message received\n"); if (method=="SUBSCRIBE") log(1, "SUBSCRIBE message received\n"); if (method=="NOTIFY") log(1, "NOTIFY message received\n"); if (method=="OPTIONS") log(1, "OPTIONS message received\n"); if (method=="INFO") log(1, "INFO message received\n"); if (method=="MESSAGE") log(1, "MESSAGE message received\n"); if (method=="REFER") log(1, "REFER message received\n"); # lookup("aliases"); # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; # check changed from 0.8.11 to 0.8.12 # if (len_gt( max_len )) { if (msg:len > max_len) { sl_send_reply("513", "Message too big"); break; }; # if (!uri==myself) { # sl_send_reply("404", "not reponsible for host in request-uri"); # break; # }; # Voicemail specific configuration - begin if(method=="ACK" || method=="INVITE" || method=="BYE" || method=="REFER" || method=="CANCEL"){ log(1, "Entering voicemail processing\n"); log(1, "check if new transaction ... \n"); if(t_newtran()){ log(1, "... yes, new transaction\n"); t_reply("100","voicemail ser - Trying -- just wait a minute !"); t_reply("100","voicemail ser - Trying 2 -- just wait a minute !"); if(method=="INVITE" || method=="REFER"){ log("**************** vm start - begin ******************\n"); if( uri =~ "conference" ){ log(1, "incoming conference call\n"); if(!vm("/tmp/am_fifo","conference")){ log("could not contact conference server\n"); t_reply("500","could not contact conference server"); }; } else if( uri =~ "echo" ){ log(1, "incoming echo call\n"); if(!vm("/tmp/am_fifo","echo")){ log("could not contact echo\n"); t_reply("500","could not contact echo"); }; } else { log(1, "incoming voicemail call\n"); if(!vm("/tmp/am_fifo","voicemail")){ log("could not contact voicemail\n"); t_reply("500","could not contact voicemail"); }; }; log("**************** vm start - end ******************\n"); break; }; if(method=="BYE" || method=="CANCEL"){ log("**************** vm end/refer - begin ******************\n"); if(!vm("/tmp/am_fifo","bye")){ log("could not contact the media server\n"); t_reply("500","could not contact the media server"); }; log("**************** vm end/refer - end ********************\n"); break; }; } else { log("could not create new transaction\n"); sl_send_reply("500","could not create new transaction"); }; }; # Voicemail specific configuration - end sl_send_reply("501", "method not understood here"); log(1, "method not understood here\n"); } =========================================================== i dont have modified sems.conf =========================================================== please help me !! thanks, Carl