[Serusers] helppppppppppppp pleaseeeeeeeeeeeeee

hi everybody, I am using ser with dbtext database The code is working, the authentification users is ok but when i add news users, i have a pb, they are not loaded in the suscriber. My question is : can i add users in the suscriber table (dbtext) without restart ser Thank you. # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=7 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- loadmodule "/usr/local/lib/ser/modules/dbtext.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- ################################################################# modparam("usrloc", "db_mode",2) modparam("usrloc", "db_url", "/usr/local/etc/ser/dbtext") # -- auth params -- # modparam("auth_db", "db_url", "/usr/local/etc/ser/dbtext") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") ################################################################ # -- registrar params -- ########################################################## #modparam("registrar", "nat_flag", 6) #modparam("registrar", "max_expires", 1200) #modparam("registrar", "min_expires", 300) #modparam("registrar", "default_expires", 1200) #modparam("registrar", "use_domain", 1) #modparam("registrar","desc_time_order",1) # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication # if (!www_authorize("softiphone.net", "subscriber")) { # www_challenge("softiphone.net", "0"); # break; # }; if (!proxy_authorize("", "subscriber")) { proxy_challenge("", "0"); break; } save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } -- Karim Oumalou