14 May
2020
14 May
'20
2:32 p.m.
Hi Supreeth,
I have kamailio ims installed in 4 vms inside openstack.
10.40.10.3 - pcscf in port 4060 (pcscf with NAT enabled in pcscf.cfg
(!#define WITH_NAT) and configured rtpproxy)
10.40.10.12 - icscf in port 4070
10.40.10.5 - scscf in port 4080
10.40.10.30 - hss
so all these vms are running in same subnet.
I have a floating ip associated to pcscf.
Now I have two zoiper clients outside openstack
zoiper1 - 10.0.2.15 (NAT Enabled Network adaptor)
zoiper2 - 10.0.2.15
when i am making a call from zoiper1 to zoiper2, call is going properly .
SIP messages are coming properly in wireshark packets.
when i filter for RTP packets in wireshark, it is not coming.
when i have the zoiper clients inside openstack itself ,i can able to see
RTP Packets in wireshark between two sip clients without any NAT related
configurations done.
Kindly help me.
Thanks.
On Thu, May 14, 2020 at 4:49 PM supreeth herle <herlesupreeth(a)gmail.com>
wrote:
Can you explain some more when you mean by "RTP
alone is not coming."?
And, how are you checking/verifying that?
Regards,
Supreeth
On Thu, 14 May 2020 at 13:12, Pavithra Mohanraja <pavimohan3004(a)gmail.com>
wrote:
Hi ,
Yes I have configured as you mentioned only . In my pcscf only i have
rtpproxy also configured.
Floating IP i have given in listen address also as
listen = 10.40.10.3:4060 advertise 10.45.4.22:4060
10.40.10.3 - private ip
10.45.4.22 - floating ip
Still RTP alone is not coming.
Is it the only way of configuring NAT ?
Thanks.
On Thu, May 14, 2020 at 4:37 PM supreeth herle <herlesupreeth(a)gmail.com>
wrote:
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Hello Pavithra,
Have you tried advertising the floating IP of the VM running RTPProxy as
follows?
Edit /etc/default/rtpproxy file as follows:
# Additional options that are passed to the daemon.
EXTRA_OPTS="-l 172.24.15.30 -d DBUG:LOG_LOCAL0"
here, "-l <PUBLIC_IP>"
Hope it helps.
Regards,
Supreeth
On Thu, 14 May 2020 at 13:01, Pavithra Mohanraja <
pavimohan3004(a)gmail.com> wrote:
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Hi ,
Could anybody please give me the approach how to configure NAT in
kamailio IMS.
I have installed kamailio IMS in openstack environment which has
private ips for all four vms (each component in one vm). pcscf has one
floating IP attached. I have enabled "WITH_NAT" and configured rtpproxy .
when i make a call from outside of openstack using 2 zoiper clients
with outbound proxy keeping floating ip of pcscf, I am getting 200 ok with
all SIP packets correctly flowing but there is no RTP Packet.
When i try the same within openstack environment without using public
ip, I am getting RTP Packets.
Kindly tell me the procedure of NAT Enablement or do i need to do
anything other than this.
Kindly help because i am stuck with this for long time.
Thanks.
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users