Hi,
I'm having problems with accounting calls made from my SIP phone. Radius accounting keeps logs at two interfaces, i.e. 127.0.0.1 & 192.168.1.1 (which is my router's ip). However, I keep getting an error at 127.0.0.1, which states:
Wed Apr 6 04:38:51 2005 Acct-Status-Type = Failed Service-Type = Sip-Session Sip-Response-Code = 200 Sip-Method = 16 User-Name = "sipsak@localhost.localdomain" Calling-Station-Id = "sip:sipsak@localhost.localdomain:57722" Called-Station-Id = "sip:1010@orion.lab.test.com.sg" Sip-Translated-Req-ID = "sip:1010@192.168.1.16:5065;user=phone;transport=udp" Acct-Session-Id = "9863344725@localhost.localdomain" Sip-To-Tag = "n/a" Sip-From-Tag = "3acb0955" Sip-Cseq = "2" NAS-IP-Address = 192.168.1.2 NAS-Port = 5060 Acct-Delay-Time = 0 Client-IP-Address = 127.0.0.1 Acct-Unique-Session-Id = "0db3766b5e79495d" Timestamp = 1112733531
As for the 192.168.1.1 interface, I only get :
Wed Apr 6 16:21:06 2005 Acct-Session-Id = "00000001" Cisco-AVPair = "client-mac-address=0011.216f.a290" Framed-Protocol = PPP Cisco-AVPair = "connect-progress=Call Up" Acct-Authentic = RADIUS Acct-Status-Type = Start User-Name = "AST_test" Acct-Multi-Session-Id = "00000002" Acct-Link-Count = 1 NAS-Port-Type = Virtual NAS-Port = 0 NAS-Port-Id = "0/0/1/0" Service-Type = Framed-User NAS-IP-Address = 192.168.1.1 Acct-Delay-Time = 0 Client-IP-Address = 192.168.1.1 Acct-Unique-Session-Id = "a68d09c330a0010d" Timestamp = 1112775666
Not all states of a current session are accounted for. Can someone pls advise me on what I might be missing? My ser.cfg is as follows, and any advise will be greatly appreciated.
Regards, YY
-----------------------------------------------------------------------
# # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script #
# ----------- global configuration parameters ------------------------
#debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E)
# Uncomment these lines to enter debugging mode debug=7 fork=yes listen=192.168.1.2 log_stderror=yes
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/exec.so"
# RADIUS support loadmodule "/usr/local/lib/ser/modules/acc.so"
# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" #loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
# ----------------- setting module-specific parameters --------------- # -- usrloc params --
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2)
# -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password")
# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)
# -- acc params -- modparam("acc", "radius_config", "/usr/local/etc/radiusclient/radiusclient.conf") modparam("acc", "radius_missed_flag", 2) modparam("acc", "radius_flag", 1)
#modparam("acc", "log_level", 1) #modparam("acc", "log_flag", 1)
# -- auth_radius params -- modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient/radiusclient.conf")
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; setflag(1);
# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };
# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it)
if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication if (!radius_www_authorize("")) { www_challenge("", "0"); break; };
save("location"); break; };
if (method=="INVITE") { acc_rad_request("Start"); };
if (method=="BYE") { acc_rad_request("Stop"); };
if (method=="REGISTER" || method=="INVITE" || method=="BYE" || method=="CANCEL") { #Save messages in mysql for CDRTool exec_msg("/usr/local/etc/sertrace.py; exit 1"); };
# attempt handoff to PSTN if (uri=~"^sip:9[0-9]*@orion.lab.test.com.sg") { ## This assumes that the caller is log(1, "Forwarding to PSTN"); ## registered in our realm forward(192.168.1.1, 5060); ## Our Cisco router break; };
# attempt handoff to 1003 if (uri=~"^sip:1003@orion.lab.test.com.sg") { ## This assumes that the caller is log(1, "Forwarding to 1003"); ## registered in our realm forward(192.168.1.1, 5060); ## Our Cisco router break; };
# native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); };
}