9 Oct
2006
9 Oct
'06
12:38 p.m.
Hi Greger,
Thank you for your reply.
I tried what you suggested, are there any things i still should do? like
paramaters of usrloc?
Because i still can't call an extension registered on the other SIP servers.
e.g.
my extension is 5890 i'm registered at SIP #3, i'm try to call 5870
registered at SIP#1 and i tried to call 5860 registered at SIP#2.
but cannot call it it, when do serctl ul show extension registered on
one SIP cannot be found on the others. what could be wrong?
Thanks again
Regards,
Ron
Greger V. Teigre wrote:
I would put a break after save_noreply() if I were you
(to avoid
calling save later on)
and then you don't really need the second test for ips (enclosing the
forwards).
Except from that, it looks ok.
g-)
Nhadie Ramos wrote:
Hi All,
I have the REGISTER part of my ser.cfg below, what do you think is
wrong because it doesn't replicate it.
Do i have to do any changes on parameters of required modules?
if (method=="REGISTER") {
if ((src_ip=="10.10.10.20") ||
(src_ip=="10.10.10.30")) {
if (isflagset(8)) {xlog("L_INFO",
"Register: Source is either 10.10.10.20 or 10.10.10.30\n");};
save_noreply("location");
} else if (!www_authorize("mydomain.com",
"subscriber")) {
if (isflagset(8)) {xlog("L_INFO",
"Register: asking for authentication\n");};
www_challenge("mydomain.com", "0");
break;
};
if (isflagset(8)) {xlog("L_INFO", "Register:
Authorized, saving location\n");};
if (!save("location")) {
sl_reply_error();
} else {
if (isflagset(8)) {xlog("L_INFO",
"Register: Authorized, saving location\n");};
if ((!src_ip=="10.10.10.20") ||
(!src_ip=="10.10.10.30")) {
if (isflagset(8))
{xlog("L_INFO", "Register: Replicating to 10.10.10.20\n");};
forward_tcp("10.10.10.20", 5060);
forward_tcp("10.10.10.30", 5060);
};
};
break;
};
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers