Hi Daniel
Is there anything else you need on this?
On 26 April 2017 at 15:06, Pete Kelly <pkelly(a)gmail.com
<mailto:pkelly@gmail.com>> wrote:
Hi Daniel
It's CSeq 1, fromtag A1
DB attached
On 26 April 2017 at 15:03, Daniel-Constantin Mierla
<miconda(a)gmail.com <mailto:miconda@gmail.com>> wrote:
Can you paste here the from tag or cseq for the dialog you are
referring to? Because the number of frames are not matching my
pcap viewer.
Send also the db dump, they should reveal if something is
broken there.
Cheers,
Daniel
On 26.04.17 14:46, Pete Kelly wrote:
Ah I see why it is confusing
This setup maintains a Call-ID through an SBC downstream, so
the INVITE's you see have the same Call-ID but they have a
different fromtag/cseq, Wireshark shows them all as one call
which is annoying when looking at the viewer!
If you check the first call only between 252.70 and 252.75
you will see INVITE (frame 4), 200OK (frame 16) with lots of
RR headers.
The ACK generated by topos (frame 21) only contains 1 Route
header, it should contain more so the request can hop through
the proxy chain as shown in frame 16.
I see the example from Sergey is working, but there is only 1
RR header in this example - as you can see from my example
the topos module uses the first RR header but ignores the
other 5.
I have the DB dump and logfiles from this call too if useful.
Pete
On 26 April 2017 at 12:41, Daniel-Constantin Mierla
<miconda(a)gmail.com <mailto:miconda@gmail.com>> wrote:
As I could notice upon a quick look, there seems to be
two calls -- two
INVITE requests having same call id but different cseq.
Can you confirm
this is the case? Because the capture doesn't seem to
have all the
incoming/outgoing messages, some are missing.
Cheers,
Daniel
On 26.04.17 12:59, Sergey Basov wrote:
You give to us very hard callflow...
Without any pauses between responces..
Some requests go through 127.0.0.1... But responces
from 127.0.0.1 not
present.
There are peers from which invites not present in dump.
I can not see
ful path of the initial Invite, but there is
responses.
I will send dump in next email directly.
--
Best regards,
Sergey Basov e-mail:
sergey.v.basov(a)gmail.com
<mailto:sergey.v.basov@gmail.com>
2017-04-26 11:01 GMT+03:00 Pete Kelly <pkelly(a)gmail.com
<mailto:pkelly@gmail.com>>:
> Attached is the pcap from latest nightly.
>
> As you can see (frame 21) the ACK is incorrect, I
believe it
should specify
> all the hops from the 200OK (frame 16) so
that the hop
by hop ACK can be
> routed via the proxy chain.
>
> topoh module works fine.
>
> Pete
>
> On 26 April 2017 at 05:18, Sergey Basov
<sergey.v.basov(a)gmail.com
<mailto:sergey.v.basov@gmail.com>> wrote:
>> I dont know how nightly builds are done.
>>
>> Just try with latest 5.0.1 nightly and send new dump.
>>
>> As I understud topos module done to remove
record-route
headers to hide
>> topology... Am I wright, Daniel?
>>
>> And try to disable topos module and enable topoh
module. Will
it all work
>> as you expecrs?
>>
>> --
>> WBR
>> Sergey Basov
>>
>> 25 апр. 2017 г. 11:31 PM пользователь "Pete Kelly"
<pkelly(a)gmail.com <mailto:pkelly@gmail.com>>
>> написал:
>>
>>> I have tried with 5.0.1 from today (25th April).
>>>
>>> Are you saying build for 26th will have some fixes?
>>>
>>> On 25 April 2017 at 18:59, Sergey Basov
<sergey.v.basov(a)gmail.com
<mailto:sergey.v.basov@gmail.com>> wrote:
>>>> Actualy latest fixes to
180/183/200, ACK and
memory leak was pushed to
>>>> 5.0 and master branch.
>>>>
>>>> So, please try with latest 5.0.1 nightly.
>>>>
>>>> --
>>>> WBR
>>>> Sergey Basov
>>>>
>>>> 25 апр. 2017 г. 8:55 PM пользователь "Pete Kelly"
<pkelly(a)gmail.com <mailto:pkelly@gmail.com>>
>>>> написал:
>>>>
>>>>> Call is with sipp but first goes through another
SBC to clean up the
>>>>> SIP (in case of problems with
sipp via headers etc).
>>>>>
>>>>> The traces I've done are actually with 4.4.
>>>>>
>>>>> Will they be OK or would you prefer 5.0.1? The
problem is exactly the
>>>>> same on both.
>>>>>
>>>>> On 25 April 2017 at 16:25, Sergey Basov
<sergey.v.basov(a)gmail.com <mailto:sergey.v.basov@gmail.com>>
>>>>> wrote:
>>>>>> Hi.
>>>>>>
>>>>>> Can you send dump of the call with kamailio 5.0.1
nightly?
>>>>>>
>>>>>> And does you make call using sipp?
>>>>>>
>>>>>> --
>>>>>> WBR
>>>>>> Sergey Basov
>>>>>>
>>>>>> 25 апр. 2017 г. 5:57 PM пользователь "Pete Kelly"
<pkelly(a)gmail.com <mailto:pkelly@gmail.com>>
>>>>>> написал:
>>>>>>> Looks like from last night:
>>>>>>>
>>>>>>> 5.0.1+0~20170425013247.36+trusty
>>>>>>>
>>>>>>> On 25 April 2017 at 15:42, Daniel-Constantin Mierla
>>>>>>> <miconda(a)gmail.com <mailto:miconda@gmail.com>>
wrote:
>>>>>>>> Hello,
>>>>>>>>
>>>>>>>> to be sure, it is 5.0.1 build from last night
or quite recent? There
>>>>>>>> were some fixes
in the past days to topos module.
>>>>>>>>
>>>>>>>> Cheers,
>>>>>>>> Daniel
>>>>>>>>
>>>>>>>>
>>>>>>>> On 25.04.17 15:59, Pete Kelly wrote:
>>>>>>>>
>>>>>>>> Hi Daniel
>>>>>>>>
>>>>>>>> Sorry for the delayed response to this, the ACK
is for a 200OK yes
>>>>>>>> and the problem
still persists in latest 4.4
and the 5.0.1 nightly build.
>>>>>>>>
>>>>>>>> I have all DB entries/kam logs/pcap files.
>>>>>>>>
>>>>>>>> If you check the attached pcap, 192.168.70.70
and 192.168.252.70 are
>>>>>>>> the same instance
of Kamailio, it is being used
to bridge the 2 networks.
>>>>>>>>
>>>>>>>> Frame 34 shows the 200OK with lots of
Record-Route etc, and frame 35
>>>>>>>> shows topos in
action.
>>>>>>>>
>>>>>>>> However the ACK that is relayed in Frame 38
seems to be missing all
>>>>>>>> the Route
information that was supplied in the
200OK, this causes the ACK to
>>>>>>>> be relayed
directly to the Contact, breaking
the proxy chain.
>>>>>>>>
>>>>>>>> Pete
>>>>>>>>
>>>>>>>> On 22 February 2017 at 18:31, Daniel-Constantin
Mierla
>>>>>>>>
<miconda(a)gmail.com <mailto:miconda@gmail.com>>
wrote:
>>>>>>>>> Hello,
>>>>>>>>>
>>>>>>>>> is the ACK for 200ok? Or an ack for a negative
response?
>>>>>>>>>
>>>>>>>>> Can you get a pcap for such situation with all
messages related to
>>>>>>>>> the call?
>>>>>>>>>
>>>>>>>>> Cheers,
>>>>>>>>> Daniel
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On 22/02/2017 17:20, Pete Kelly wrote:
>>>>>>>>>
>>>>>>>>> Hi
>>>>>>>>>
>>>>>>>>> I am using the topos module when bridging 2
networks with Kamailio.
>>>>>>>>>
>>>>>>>>> The INVITE/200OK part of the transaction is
working fine (i.e. the
>>>>>>>>> Contact on
both sides matches correctly the
corresponding network).
>>>>>>>>>
>>>>>>>>> However when the ACK is sent into Kamailio,
instead of realising
>>>>>>>>> the next hop
is myself and skipping it,
Kamailio is sending the ACK directly
>>>>>>>>> to itself as
a packet, causing the call setup
to break.
>>>>>>>>>
>>>>>>>>> Does anyone have any advice for this situation?
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> SIP Express Router (SER) and Kamailio
(OpenSER) - sr-users mailing
>>>>>>>>> list
>>>>>>>>> sr-users(a)lists.sip-router.org
<mailto:sr-users@lists.sip-router.org>
>>>>>>>>>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
<http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>
>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> Daniel-Constantin Mierla
>>>>>>>>>>
www.twitter.com/miconda
<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda
<http://www.linkedin.com/in/miconda>
>>>>>>>>> Kamailio
Advanced Training - Mar 6-8 (Europe)
and Mar 20-22 (USA) -
>>>>>>>>>
www.asipto.com <http://www.asipto.com>
>>>>>>>>> Kamailio World Conference - May 8-10, 2017 -
www.kamailioworld.com <http://www.kamailioworld.com>
>>>>>>>> --
>>>>>>>> Daniel-Constantin Mierla
>>>>>>>>
www.twitter.com/miconda
<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda
<http://www.linkedin.com/in/miconda>
>>>>>>>> Kamailio Advanced
Training - May 22-24 (USA) -
www.asipto.com
<http://www.asipto.com>
>>>>>>>> Kamailio World
Conference - May 8-10, 2017 -
www.kamailioworld.com
<http://www.kamailioworld.com>
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Kamailio (SER) - Users Mailing List
>>>>>>> sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>
>>>>>>>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
>>>>>>>
--
Daniel-Constantin Mierla
www.twitter.com/miconda <http://www.twitter.com/miconda>
--
www.linkedin.com/in/miconda
<http://www.linkedin.com/in/miconda>
Kamailio Advanced Training - May 22-24 (USA) -
www.asipto.com <http://www.asipto.com>
Kamailio World Conference - May 8-10, 2017 -
www.kamailioworld.com <http://www.kamailioworld.com>
<http://www.linkedin.com/in/miconda>
Kamailio Advanced Training - May 22-24 (USA) -