14 Mar
2023
14 Mar
'23
5:19 a.m.
That seems like it ought to have worked, but no..
Same issue,
Pic of trace attached.
The below config is largely cribbed from the default kamailio.cfg, and from the Dispatcher
documentation example config..
In request_route
route(DISPATCH);
route[DISPATCH] {
if (!ds_select_dst(1, 4)) { #Get a destination from dispatcher
send_reply("404","No destination DS");
exit;
}
xlog("--- DISPATCH: going to <$ru> via <$du> (attrs:
$xavp(_dsdst_=>attrs))\n");
t_on_failure("DISPATCH_FAILURE");
route(RELAY); #Route it
exit;
}
failure_route[DISPATCH_FAILURE] {
if (t_is_canceled()) {
exit;
}
# if an auth request, don't go to next entry in ds list..
if (t_check_status("(401)|(407)")) {
xlog("401 or 407 status reply from dispatch");
exit;
}
# next DST - only for 500 or local timeout
if (t_check_status("500")
or (t_branch_timeout() and !t_branch_replied())) {
# on a timeout failure, 500, etc mark this dest as IP (as bad).
ds_mark_dst("ip");
if(ds_next_dst()) {
xlog("--- DISPATCH_FAILURE: retrying to <$ru> via
<$du> (attrs: $xavp(_dsdst_=>attrs))\n");
t_on_failure("DISPATCH_FAILURE");
route(RELAY);
exit;
}
}
}
On 3/13/23, 7:49 PM, "Alex Balashov" <abalashov(a)evaristesys.com
<mailto:abalashov@evaristesys.com>> wrote:
To your failure_route used for dispatcher rollover, add:
if(t_check_status(“407|401”))
exit;
This will allow the 401/407 challenge to be fed back to the original caller.
— Alex
On Mar 13, 2023, at 8:27 PM, Jawaid Bazyar
<bazyar(a)gmail.com <mailto:bazyar@gmail.com>> wrote:
Hi Alex,
I did try round-robin, but it has a different issue, which is that calls from a handset
through the Kamailio to say asterisk1, trigger authentication challenge, then when the
auth comes back from the client, Kam decides that's a failure, goes into the failover
logic, and it round robins the client's auth to the -other- asterisk asterisk2, which
then rejects the auth attempt as having a stale nonce (which is right, since it came from
the other asterisk).
I haven't yet figured out how to keep affinity for the same asterisk except by
routing based on CallID.
I guess the other option would be to tell Dispatcher that 401 Auth is not a
'failure'. If I can figure that out, then I can try with round robin.
Jawaid
--
On 3/13/23, 6:09 PM, "Alex Balashov" <abalashov(a)evaristesys.com
<mailto:abalashov@evaristesys.com> <mailto:abalashov@evaristesys.com
<mailto:abalashov@evaristesys.com>>> wrote:
I wonder if the distribution algorithm you have chosen behaves differently in this
regard. Have you tried plain round-robin (i.e. #4)?
--
Alex Balashov
Principal Consultant
Evariste Systems LLC
Web: https://evaristesys.com <https://evaristesys.com>
Tel: +1-706-510-6800
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
To unsubscribe send an email to sr-users-leave(a)lists.kamailio.org
<mailto:sr-users-leave@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
On Mar 13, 2023, at 6:59 PM, Jawaid Bazyar
<bazyar(a)gmail.com <mailto:bazyar@gmail.com> <mailto:bazyar@gmail.com
<mailto:bazyar@gmail.com>>> wrote:
Hi,
Maybe it would be easier to explain my expectations on how it's supposed to work, and
then you can tell me where I'm making a wrong assumption __
So, load balancers like haproxy etc perform "health checks" on the service
being balanced. In this case, I have it setup for Kamailio to send OPTIONS and I do in
fact see those packets and 200 OK responses. And if haproxy sees a host is down, it
immediately stops trying to send client requests to that host.
In this case, after 10 successful OPTIONS pings, Kamailio marks the destination as AP and
everything is fine, Kamailio correctly returns the destination in ds_select_dst.
I have the settings below, so that if the service misses 5 OPTIONS checks, Kamailio
should mark that destination as "inactive".
But, it should keep probing it, so Kamailio can detect when the destination comes back
up. So as I understand it, that's the status "IP".
And, Kamailio should stop including that destination in the responses from
ds_select_dst().
And all of that is behaving as expected, EXCEPT that last bit - ds_select_dst continues
to include the IP (inactive) destination in responses.
I added
ds_mark_dst("ip");
in the event of a 500 or branch failure response, but I don't understand why this is
needed, because the destination is already in "IP" mode.
So seemingly Kamailio knows the destination is inactive, but ds_select_dst isn't
acting on it unless I manually mark the target also.
Perhaps I am overlooking an option?
Regards,
Jawaid
On 3/13/23, 9:51 AM, "Henning Westerholt" <hw(a)gilawa.com
<mailto:hw@gilawa.com> <mailto:hw@gilawa.com <mailto:hw@gilawa.com>>
<mailto:hw@gilawa.com <mailto:hw@gilawa.com> <mailto:hw@gilawa.com
<mailto:hw@gilawa.com>>>> wrote:
Hello,
probing means in this context sending OPTIONS pings, yes.
In mode 1 you can disable the probing by setting flag 4 to the destination in the
dispatcher file, according to the docs.
Cheers,
Henning
-----Original Message-----
From: Henning Westerholt <hw(a)gilawa.com <mailto:hw@gilawa.com>
<mailto:hw@gilawa.com <mailto:hw@gilawa.com>> <mailto:hw@gilawa.com
<mailto:hw@gilawa.com> <mailto:hw@gilawa.com
<mailto:hw@gilawa.com>>>>
Sent: Montag, 13. März 2023 15:55
To: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org> <mailto:sr-users@lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>> <mailto:sr-users@lists.kamailio.org
<mailto:sr-users@lists.kamailio.org> <mailto:sr-users@lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>>>>
Subject: [SR-Users] Re: Dispatcher behavior
Hello,
not sure what the "auto-probing" mode is, but you can configure the dispatcher
OPTIONS ping behaviour with that parameter:
https://kamailio.org/docs/modules/5.5.x/modules/dispatcher.html#dispatcher.…
<https://kamailio.org/docs/modules/5.5.x/modules/dispatcher.html#dispatcher.p.ds_probing_mode>
<https://kamailio.org/docs/modules/5.5.x/modules/dispatcher.html#dispatcher.p.ds_probing_mode>
<https://kamailio.org/docs/modules/5.5.x/modules/dispatcher.html#dispatcher.p.ds_probing_mode>>
<https://kamailio.org/docs/modules/5.5.x/modules/dispatcher.html#dispatcher.p.ds_probing_mode>
<https://kamailio.org/docs/modules/5.5.x/modules/dispatcher.html#dispatcher.p.ds_probing_mode>>
<https://kamailio.org/docs/modules/5.5.x/modules/dispatcher.html#dispatcher.p.ds_probing_mode>>
<https://kamailio.org/docs/modules/5.5.x/modules/dispatcher.html#dispatcher.p.ds_probing_mode&gt;>>
Cheers,
Henning
-----Original Message-----
From: Jawaid Bazyar <bazyar(a)gmail.com <mailto:bazyar@gmail.com>
<mailto:bazyar@gmail.com <mailto:bazyar@gmail.com>>
<mailto:bazyar@gmail.com <mailto:bazyar@gmail.com> <mailto:bazyar@gmail.com
<mailto:bazyar@gmail.com>>>>
Sent: Montag, 13. März 2023 14:33
To: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org> <mailto:sr-users@lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>> <mailto:sr-users@lists.kamailio.org
<mailto:sr-users@lists.kamailio.org> <mailto:sr-users@lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>>>>
Subject: [SR-Users] Re: Dispatcher behavior
Hi Alex,
I don't see "auto-probing" in the documentation.. here is my dispatcher
config that I snatched from somewhere on the Internet.
modparam("dispatcher", "db_url",
"mysql://xxxxxxx/kamailio") #Use DBURL variable for database parameters
modparam("dispatcher", "flags", 2) # If flag 2 is set, then the
failover support is enabled.
modparam("dispatcher", "table_name", "dispatcher")
modparam("dispatcher", "ds_ping_interval", 5) #How often to ping
destinations to check status
modparam("dispatcher", "ds_ping_method", "OPTIONS") #Send
SIP Options ping
modparam("dispatcher", "ds_probing_threshold", 5) #How many failed
pings in a row do we need before we consider it down
modparam("dispatcher", "ds_inactive_threshold", 10) #How many
sucessful pings in a row do we need before considering it up
modparam("dispatcher", "ds_ping_latency_stats", 1) #Enables stats on
latency
modparam("dispatcher", "ds_probing_mode", 1) #Keeps pinging gateways
when state is known (to detect change in state)
On 3/12/23, 8:28 PM, "Alex Balashov" <abalashov(a)evaristesys.com
<mailto:abalashov@evaristesys.com> <mailto:abalashov@evaristesys.com
<mailto:abalashov@evaristesys.com>> <mailto:abalashov@evaristesys.com
<mailto:abalashov@evaristesys.com> <mailto:abalashov@evaristesys.com
<mailto:abalashov@evaristesys.com>>> <mailto:abalashov@evaristesys.com
<mailto:abalashov@evaristesys.com> <mailto:abalashov@evaristesys.com
<mailto:abalashov@evaristesys.com>> <mailto:abalashov@evaristesys.com
<mailto:abalashov@evaristesys.com> <mailto:abalashov@evaristesys.com
<mailto:abalashov@evaristesys.com>>>>> wrote:
Unless you have auto-probing enabled, yes.
--
Alex Balashov
Principal Consultant
Evariste Systems LLC
Web: https://evaristesys.com <https://evaristesys.com>
<https://evaristesys.com> <https://evaristesys.com>>
Tel: +1-706-510-6800
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
To unsubscribe send an email to sr-users-leave(a)lists.kamailio.org
<mailto:sr-users-leave@lists.kamailio.org>
<mailto:sr-users-leave@lists.kamailio.org
<mailto:sr-users-leave@lists.kamailio.org>>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
To unsubscribe send an email to sr-users-leave(a)lists.kamailio.org
<mailto:sr-users-leave@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe: On Mar 12, 2023, at 9:14 PM, Jawaid Bazyar
<bazyar(a)gmail.com <mailto:bazyar@gmail.com> <mailto:bazyar@gmail.com
<mailto:bazyar@gmail.com>> <mailto:bazyar@gmail.com
<mailto:bazyar@gmail.com> <mailto:bazyar@gmail.com
<mailto:bazyar@gmail.com>>> <mailto:bazyar@gmail.com
<mailto:bazyar@gmail.com> <mailto:bazyar@gmail.com
<mailto:bazyar@gmail.com>> <mailto:bazyar@gmail.com
<mailto:bazyar@gmail.com> <mailto:bazyar@gmail.com
<mailto:bazyar@gmail.com>>>>> wrote:
Hi, is this expected behavior?
I have two target hosts in a dispatcher set, 10.20.20.118 (prio 5) and 10.20.20.252 (prio
10).
When I have 10.20.20.252 turned off, dispatcher still tries to send packets to that host,
even when the status flags are IP.
root@vs-rs01:/etc/kamailio# kamcmd dispatcher.list {
NRSETS: 1
RECORDS: {
SET: {
ID: 1
TARGETS: {
DEST: {
URI: sip:10.20.20.252:5060
FLAGS: IP
PRIORITY: 10
LATENCY: {
AVG: 0.000000
STD: 0.000000
EST: 0.000000
MAX: 0
TIMEOUT: 62
}
}
DEST: {
URI: sip:10.20.20.118:5060
FLAGS: AP
PRIORITY: 5
LATENCY: {
AVG: 3.876000
STD: 2.965000
EST: 5.058000
MAX: 14
TIMEOUT: 0
}
}
}
}
}
}
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions To
unsubscribe send an email to sr-users-leave(a)lists.kamailio.org
<mailto:sr-users-leave@lists.kamailio.org>
<mailto:sr-users-leave@lists.kamailio.org
<mailto:sr-users-leave@lists.kamailio.org>>
<mailto:sr-users-leave@lists.kamailio.org
<mailto:sr-users-leave@lists.kamailio.org>
<mailto:sr-users-leave@lists.kamailio.org
<mailto:sr-users-leave@lists.kamailio.org>>>
<mailto:sr-users-leave@lists.kamailio.org
<mailto:sr-users-leave@lists.kamailio.org>
<mailto:sr-users-leave@lists.kamailio.org
<mailto:sr-users-leave@lists.kamailio.org>>
<mailto:sr-users-leave@lists.kamailio.org
<mailto:sr-users-leave@lists.kamailio.org>
<mailto:sr-users-leave@lists.kamailio.org
<mailto:sr-users-leave@lists.kamailio.org>>>>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
--
Alex Balashov
Principal Consultant
Evariste Systems LLC
Web: https://evaristesys.com <https://evaristesys.com>
<https://evaristesys.com> <https://evaristesys.com>>
<https://evaristesys.com> <https://evaristesys.com>>
<https://evaristesys.com>>
<https://evaristesys.com&gt;>> <https://evaristesys.com>
<https://evaristesys.com>> <https://evaristesys.com>>
<https://evaristesys.com&gt;>>
<https://evaristesys.com>>
<https://evaristesys.com&gt;>>
<https://evaristesys.com&gt;>>
<https://evaristesys.com&amp;gt;&gt;>>
Tel: +1-706-510-6800
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions To unsubscribe send an email
to sr-users-leave(a)lists.kamailio.org <mailto:sr-users-leave@lists.kamailio.org>
<mailto:sr-users-leave@lists.kamailio.org
<mailto:sr-users-leave@lists.kamailio.org>>
<mailto:sr-users-leave@lists.kamailio.org
<mailto:sr-users-leave@lists.kamailio.org>
<mailto:sr-users-leave@lists.kamailio.org
<mailto:sr-users-leave@lists.kamailio.org>>>
<mailto:sr-users-leave@lists.kamailio.org
<mailto:sr-users-leave@lists.kamailio.org>
<mailto:sr-users-leave@lists.kamailio.org
<mailto:sr-users-leave@lists.kamailio.org>>
<mailto:sr-users-leave@lists.kamailio.org
<mailto:sr-users-leave@lists.kamailio.org>
<mailto:sr-users-leave@lists.kamailio.org
<mailto:sr-users-leave@lists.kamailio.org>>>>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions To unsubscribe send an email
to sr-users-leave(a)lists.kamailio.org <mailto:sr-users-leave@lists.kamailio.org>
<mailto:sr-users-leave@lists.kamailio.org
<mailto:sr-users-leave@lists.kamailio.org>>
<mailto:sr-users-leave@lists.kamailio.org
<mailto:sr-users-leave@lists.kamailio.org>
<mailto:sr-users-leave@lists.kamailio.org
<mailto:sr-users-leave@lists.kamailio.org>>>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions To unsubscribe send an email
to sr-users-leave(a)lists.kamailio.org <mailto:sr-users-leave@lists.kamailio.org>
<mailto:sr-users-leave@lists.kamailio.org
<mailto:sr-users-leave@lists.kamailio.org>>
<mailto:sr-users-leave@lists.kamailio.org
<mailto:sr-users-leave@lists.kamailio.org>
<mailto:sr-users-leave@lists.kamailio.org
<mailto:sr-users-leave@lists.kamailio.org>>>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
To unsubscribe send an email to sr-users-leave(a)lists.kamailio.org
<mailto:sr-users-leave@lists.kamailio.org>
<mailto:sr-users-leave@lists.kamailio.org
<mailto:sr-users-leave@lists.kamailio.org>>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe: 