On Thu, May 27, 2010 at 2:39 AM, marius zbihlei marius.zbihlei@1and1.ro wrote:
I think the database entries are setup ok, I used the example in the module doc, but I can share that if needed. Any guidance will be appriciated.
Thanks.
JR
Hello JR
Can you provide more info regarding the problem. Any special logging info in the debug log?
You can increase the debug level to 3 (higher means more verbose) by using the command `kamctl fifo debug 3`
Debug loggin is set to 9. The simulation is when a gateway is totally off-line, so there is no response at all. Here is a trace with a call from sipp to kamailio, the call is sent to the first gateway in carrier 1, domain 1. The gateway is off-line, no response.
The pastebin has my kamailio.cfg, the kamailio debug trace and the error received by sipp and the ngrep capture.
Also what reply do you get from A and B boxes? Failure_route is only executed if reply code is > 300 on all branches... I will check your other mail because this might be the problem.
Also a trace of the call will help. ngrep is very usefull (ngrep -W byline -d any sip port 5060 does the trick in most cases)
Hope I was not that redundant and the info helps.
Cheers Marius
Thanks for having a look.
JR