Ok, I figured out how to unlock the config, using the new menu item called (doh!) "unlock config".  One 7960 phone now a functioning SIP phone on the OpenSER.  Last thing to figure out is why I cannot access it by browser.

Thanks again for the help.

Scott Yagel
PacketCall, Inc.
syagel@packetcall.net

>-----Original Message-----
>From: Stephen Varga [mailto:varga@zbzoom.net]
>Sent: Wednesday, February 21, 2007 11:38 AM
>To: syagel@packetcall.net
>Cc: users@openser.org
>Subject: Re: [Users] Cisco 7960 phones
>
>Scott,
>
>Put the attached files into your tftp server that the phones are pulling
>their configs and image from. You should also have the following image
>files in the same tftp server:
>
> P003-08-2-00.bin
> P0S3-08-2-00.loads
> P0S3-08-2-00.zip
> P003-08-2-00.sbn
> P0S3-08-2-00.sb2
>
>I have used these files to successfully upgrade phones.
>
>If you have SIPxxxxxxxxxxxx.cnf file created for the phones, make sure
>the image_version line is commented out.
>
>The biggest problem I have with this version is using that it reads the
>dialplan.xml file but it does not work; I am guessing there is a syntax
>change but can not been able to find SIP documentation related to the
>8.2 code on Cisco's website. I have been staying with the 7.5 version
>of the code because of this problem.
>
>I found watching which files are being requested by phone a big help in
>getting the loads to work properly
>
>Let me know what happens.
>
>Steve
>