I'm not entirly sure why, but when i put it into a seperate route the whole thing broke, I tried it with and without t_relay_to_udp and break. When I try the following, ser doesn't even send anything to Asterisk. Any idea's what I'm doing wrong ?
route[7] { revert_uri(); rewritehostport("202.168.41.218:5060"); append_branch(); }
failure_route[1] { if (t_check_status("487")) { break; }; if (isflagset(26) && t_check_status("486")) { avp_delete("s:fwdbusy"); resetflag(26); route(7); }; if (isflagset(27) && t_check_status("408")) { avp_delete("s:fwdnoanswer"); resetflag(27); route(7); }; end_media_session(); }
Thanks Shaun
On Thursday 01 February 2007 18:43, Greger V. Teigre wrote:
you should remove t_relay_to_udp, as well as the break and make sure that on return to failure_route you don't run more commands. g-)
Shaun Hofer wrote:
I tried making route just to house the commands, I call for both: route[7] { revert_uri(); rewritehostport("202.168.41.218:5060"); append_branch(); t_relay_to_udp("202.168.41.218", "5060"); break; }
When I did this I found that it wouldn't work properly. I did play around
with
putting something like use_mediaproxy and calling other routes but seemed like they failed to be called correctly. I'm thinking either I mediaproxy all traffic before from the start or let rtp travel directly between UA
and
Asterisk.
On Wednesday 31 January 2007 18:21, you wrote:
You could create a route and then call the route from failure_route. However, I'm not sure if that will work as the INVITE was already sent to the UA not responding. But try. g-)
Shaun Hofer wrote:
Hi,
I wish to forward busy and no answer calls to Asterisk, and have the RTP stream go through mediaproxy. At the moment, some calls use mediaproxy
and
some don't. If the call is not using mediaproxy to get it too. I have
noticed
that I can't call use_media_proxy() from failed route. I don't want to
use
mediaproxy for every call between UA's, if not needed. Any suggestions
on
how
I might be able to get calls to use mediaproxy if forwarded ?
current fail route:
failure_route[1] { if (t_check_status("487")) { break; }; if (isflagset(26) && t_check_status("486")) { avp_delete("s:fwdbusy"); resetflag(26); revert_uri(); rewritehostport("202.168.41.218:5060"); append_branch(); t_relay_to_udp("202.168.41.218", "5060"); break; }; if (isflagset(27) && t_check_status("408")) { avp_delete("s:fwdnoanswer"); resetflag(27); revert_uri(); rewritehostport("202.168.41.218:5060"); append_branch(); t_relay_to_udp("202.168.41.218", "5060"); break; }; end_media_session(); }
Thanks