24 Jun
2019
24 Jun
'19
6:20 a.m.
Hi all,
I’ve done some digging and realised that outbound calls I initiate Asterisk -> Kamailio
-> Trunk are receiving the BYE correctly. However the previously provided flow was
Drachtio -> Kamailio -> Trunk.
I suspect the dialog is not being initialised correctly in some way from Drachtio. I can
make changes as required here, but I need help spotting the difference between the two.
I ran a kamcmd dlg.list on a test call Asterisk -> Kamailio -> Trunk, and another
one on Drachtio -> Kamailio -> Trunk, here are the results (with IPs anonymised and
replaced with pseudo hostnames):
Asterisk -> Kamailio -> Trunk:
https://pastebin.com/WkFefUGB <https://pastebin.com/WkFefUGB>
Drachtio -> Kamailio -> Trunk:
https://pastebin.com/G3bzNYY0 <https://pastebin.com/aX5hdqUE>
I don’t know the inner workings of Kamailio dialogs well, but these look very similar to
me. Am I on the right track here, is there other debug information I can dump to compare
what’s happening and why this BYE its going to the wrong end?
Thanks,
Andrew
On 23 Jun 2019, at 5:39 pm, Andrew White
<andrew(a)uconnected.com.au> wrote:
Hi team!
I’ve recently found an issue in my Kamailio setup. It appears when the trunk replies to
call in progress with a BYE, we relay it immediately back to them:
https://i.imgur.com/h5fusau.png <https://i.imgur.com/h5fusau.png>
The only differences in the second BYE is the Route header is removed and replaced with a
Via header referencing the Kamailio machine, and the From URI is rewritten to show the
Kamailio hostname.
I’m unsure what steps I can take here, as all of my out of dialog messages (180, 200,
ACK) are forwarded along with no issue. It seems only the in dialog are having this
issue.
Here’s my WITHINDLG and RELAY:
def ksr_route_relay()
if KSR.is_method_in("IBSU") then
if KSR::TM.t_is_set("branch_route") < 0 then
KSR::TM.t_on_branch("ksr_branch_manage")
end
end
if KSR.is_method_in("ISU") then
if KSR::TM.t_is_set("onreply_route") < 0 then
KSR::TM.t_on_reply("ksr_onreply_manage")
end
#KSR.info <http://ksr.info/>("Onreply route:
#{KSR::TM.t_is_set("onreply_route")}")
end
if KSR.is_INVITE() then
if KSR::TM.t_is_set("failure_route") < 0 then
KSR::TM.t_on_failure("ksr_failure_manage")
end
end
if KSR::TM.t_relay() < 0 then
KSR::SL.sl_reply_error()
end
exit
end
def ksr_route_withindlg()
return if KSR::SIPUTILS.has_totag() < 0
if KSR::RR.loose_route() > 0 then
ksr_route_dlguri()
if KSR.is_BYE() then
#KSR.setflag($myenv['FLT_ACC'].to_i)
#KSR.setflag($myenv['FLT_ACCFAILED'].to_i)
elsif KSR.is_ACK() then
ksr_route_natmanage()
elsif KSR.is_NOTIFY() then
KSR::RR.record_route()
end
ksr_route_relay()
exit
end
if KSR.is_ACK() then
#KSR.info <http://ksr.info/>("Handling an ACK within dialog")
if KSR::TM.t_check_trans() > 0 then
ksr_route_relay()
exit
else
exit
end
end
#KSR.info <http://ksr.info/>("404ing within dialog")
KSR::SL.sl_send_reply(404, "Not here");
exit
end
I suspect I must be sending this to the wrong branch somehow, but I’m unsure how to
correct this. The call gets originally initiated from Kamailio writing a custom RURI and
To header before calling t_relay(). I’m wondering if I’m somehow initiating the dialog
incorrectly and as such the BYE doesn’t know where to go.
Thanks!
Andrew
