Ive tried setting below in rtpengine.conf , but i get the same behaviour
|
interface=10.3.1.6!XX.XX.XX.XX |
Best Regards
Gerry
From: Henning Westerholt <hw@gilawa.com>
Sent: Saturday 8 October 2022 08:32
To: Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org>
Cc: Gerry Kernan <gerry@infinityit.ie>
Subject: RE: [SR-Users] kamailio & rtpengine question
Hello,
you might need to set the advertised address for rtpengine as well:
https://github.com/sipwise/rtpengine/blob/master/etc/rtpengine.conf
Cheers,
Henning
From: sr-users <sr-users-bounces@lists.kamailio.org>
On Behalf Of Gerry Kernan
Sent: Friday, October 7, 2022 10:49 AM
To: sr-users@lists.kamailio.org
Subject: [SR-Users] kamailio & rtpengine question
Hi
Looking for advise if anyone could point out where im going wrong.
My setup is Kamailio Ver 5.6.0 running in azure , rtpengine Version: git-master-dc395d5, behind kamailio I have asterisk ver 18.12.1
Kamailio conf I have interface set as below
listen=udp:10.3.1.6:5060 advertise WANIP:5060
and rtpengine.conf set as below
interface = eth0/10.3.1.5
but when I can make a call I don’t get any audio, rtpengine.log extract below shows that rtp is going to the private IP rather that the Public IP of the phone that initiated the call, do I need to set rtpengine_manage()
to fix this?
Oct 7 09:38:58 kamailio-proxy rtpengine[8127]: INFO: [NmE0MjdhMzA4NjUzYWVjMmRjYzIxNGJjMTY4ZTc2MWE. port 30278]: [core] Confirmed peer address as 10.3.1.5:12890
Oct 7 09:38:58 kamailio-proxy rtpengine[8127]: INFO: [NmE0MjdhMzA4NjUzYWVjMmRjYzIxNGJjMTY4ZTc2MWE. port 30278]: [core] Kernelizing media stream: 10.3.1.5:12890 -> 10.3.1.6:30278 | 10.3.1.6:30298 -> 192.168.0.123:40042
Oct 7 09:39:00 kamailio-proxy rtpengine[8127]: INFO: [NmE0MjdhMzA4NjUzYWVjMmRjYzIxNGJjMTY4ZTc2MWE. port 30279]: [core] Confirmed peer address as 10.3.1.5:12891
Kind regards
gerry
Gerry Kernan
| Technical Director
Mobile: +353(0)86-170 9790
