回复: Re: [Serusers] ser server config problem

Hi nkans, First thank you so musch for your help. I change your script a litter because I want forward all call that not call 6169xxxx to gateway and checking other call. If other call not in location, return 404 error. And I can't use "else" after "if" because it make script fail. That my script(only changed these codes):

if(uri=~"^sip:6169[0-9]*@[0-9|.]*") { if(!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # I can't use else here forward(172.16.255.1,6050); break;

Best regards, Wangji

let me know whether it works. here is the corrected script.

# ----------- global configuration parameters ------------------------

#debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E)

/* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */

debug=7 log_stderror=yes

check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so"

loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so"

# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

modparam("usrloc", "db_mode", 0)

# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2)

# -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password")

# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)

# ------------------------- request routing logic -------------------

# main routing logic

route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests # if (!mf_process_maxfwd_header("10")) { # sl_send_reply("483","Too Many Hops"); # break; # };

    if (len_gt( max_len )) {
            sl_send_reply("513", "Message too big");
            break;
    };

    # we record-route all messages -- to make sure that
    # subsequent messages will go through our proxy; that's
    # particularly good if upstream and downstream entities
    # use different transport protocol
    record_route();
    # loose-route processing
    if (loose_route()) {
            t_relay();
            break;
    };

    # if the request is for other domain use UsrLoc
    # (in case, it does not work, use the following command
    # with proper names and addresses in it)
    if (uri==myself) {

            if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication if (!www_authorize("novsky.com", "subscriber")) { www_challenge("novsky.com", "0"); break; };

                    save("location");
                    break;
            };
    };

            # native SIP destinations are handled using our USRLOC DB
                   if(uri=~"^sip:6169[0-9]*@[0-9|\.]*")  {
                            forward(172.16.255.1,6050);
                            break;
                   };
                   else    {
                   sl_send_reply("404", "Not Found");
                   break;
                   };
            };

    # forward to current uri now; use stateful forwarding; that
    # works reliably even if we forward from TCP to UDP
    if (!t_relay()) {
            sl_reply_error();
    };

}

Best regards

wangji

---------------------------------------------------------------------------- ----

---

Serusers mailing list Serusers@iptel.org http://mail.iptel.org/mailman/listinfo/serusers