Could you post the whole configuration file ? What version of ser are
you using ? Do you have "use_domain" parameters set to 1 ? If so then
set them to 0 and retry.
Jan.
On 24-02 11:13, Eduard San Anselmo Mateu wrote:
Hi all.
I'm testing the very basic functionalities of SER as a proxy with two soft
phones, one for Windows (phone(a)albasoft.com) and one for Linux
(phone2(a)albasoft.com). The proxy is at 192.168.0.15.
There's no problem with phone -> phone2 communication, but no way in
establishing phone2 -> phone: I always get the following message:
404, Not Found.
As I have been able to see with Ethereal, phone2 tries to INVITE
sip:phone@192.168.0.15:5060, and the proxy responds by saying it can't find such
user (but user sip:phone@albasoft.com is indeed registered!). I think the
problem is the :5060 part, but I'm not sure.
Can anybody help me?. Thans in advance.
Oh, yes, my config file (as you will see, it's the simplest):
listen=192.168.0.15
alias=albasoft.com
alias=albasoft.com:5060
alias=192.168.0.15
alias=192.168.0.15:5060
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if (msg:len >= max_len ) {
sl_send_reply("513", "Message too big");
break;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
#if (!method=="REGISTER") record_route();
# subsequent messages withing a dialog should take the
# path determined by record-routing
if (loose_route()) {
# mark routing logic in request
append_hf("P-hint: rr-enforced\r\n");
route(1);
break;
};
if (!uri==myself) {
# mark routing logic in request
append_hf("P-hint: outbound\r\n");
route(1);
break;
};
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication
# if (!www_authorize("iptel.org",
"subscriber")) {
# www_challenge("iptel.org", "0");
# break;
# };
save("location");
break;
};
lookup("aliases");
if (!uri==myself) {
append_hf("P-hint: outbound alias\r\n");
route(1);
break;
};
# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
};
append_hf("P-hint: usrloc applied\r\n");
route(1);
}
route[1]
{
# send it out now; use stateful forwarding as it works reliably
# even for UDP2TCP
if (!t_relay()) {
sl_reply_error();
};
}
Eduard San Anselmo
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers