28 Mar
2006
28 Mar
'06
12:35 p.m.
Hi,
Beware that if you're running openser without fork (usually for debugging),
it will only bind your first defined ip address.
In this case, udp: XXX.XXX.XXX.XXX [XXX.XXX.XXX.XXX]:5060.
So, you might want to netstat port 5061 to confirm it is binded to openser.
Regards
Marco
"Joao Pereira" <joao.pereira(a)fccn.pt> escreveu na
mensagem news:44281016.7090203@fccn.pt...
No, the phone is in a differente machine.
I believe the problem is in the ports OpenSER is using. That are:
Listening on
udp: XXX.XXX.XXX.XXX [XXX.XXX.XXX.XXX]:5060
tcp: XXX.XXX.XXX.XXX [XXX.XXX.XXX.XXX]:5060
tls: XXX.XXX.XXX.XXX [XXX.XXX.XXX.XXX]:5061
Is this the correct configuration when using TLS?
The SIP clients should use 5060 to register. And the OpenSER should use
5061 to route calls between SIP servers?
Thanks
Joao
Cesc wrote:
One option ...
do you run the phone and server on the same machine? they may be
listening on the same port or something like that ... that is, the
phone sends to the server and the server replies to the contact
address ... which is in fact the server address (the phone didn't tell
you about the port conflict ... too bad :D ). So, you get a loop.
Cesc
On 3/27/06, Joao Pereira <joao.pereira(a)fccn.pt>
wrote:
>Hello to all
>Im using openser with TLS (1.0.1-tls) but when I try to register a
>client (X-Lite), the answer is always:
>"Too Many Hops"
>because of this:
>
> if (!mf_process_maxfwd_header("10")) {
> sl_send_reply("483","Too Many Hops");
> exit;
> };
>
>
>
>Whats the problem?
>Without TLS, this error doesnt happen.
>Thanks
>Joao Pereira
>
>_______________________________________________
>Users mailing list
>Users(a)openser.org
>http://openser.org/cgi-bin/mailman/listinfo/users
>
>