13 Jun
2007
13 Jun
'07
11:23 a.m.
inline...
2007/6/12, Thomas Britis <thomas(a)tcnet.com.br>br>:
Hi all,
I'm getting a problem when a user behind a windows gateway (NATed
client) connects to my ser box.
I think this was already discussed here but I didn't find anything
on
the logs.
The problem is with the '407 Proxy Authentication Required' signal
that
never reaches the client.
Here is the scenario:
1- The user sends the INVITE from a higher port to the SIP server.
It looks like this:
User:63040 -> SER:5060
2- SER responds with a 407 Proxy Authentication Required on the client's
local sip port:
SER:5060 -> User:5060
Shouldn't SER send 407 to port 63040?? Which config file are you using?? In
the onsip/getting started examples, authentication is done before NAT check
and the challenge is not directed to the right port.
If you provide the auth+INVITE section of your config file, we might try to
point wihch are the required changes..
At this point, I think windows drops the package because it don't
refer
to any entry at the NAT table, but I'm not sure about that.
Most routers will do that, not only windows...the first and probably not
last time I don't blame exclusively w$ ;)
Samuel.
I want to know if there's a solution to this 'problem'.
Thank you all.
--
Thomas Storino Britis
TCNet Informatica e Telecomunicacoes LTDA
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers