Re: [SR-Users] Need help in routing configuration

Here is the info requested: listen=udp:10.98.6.6:5060 listen=tcp:10.98.6.6:5060 listen=tcp:10.98.6.6:5065 listen=tcp:10.98.6.6:5066 listen=tcp:10.98.6.6:5067

root@qa-qsuitePBX-01:/etc/kamailio# ifconfig eth0 Link encap:Ethernet HWaddr 00:0c:29:78:c5:c7 inet addr:10.98.6.5 Bcast:10.98.7.255 Mask:255.255.254.0 inet6 addr: fe80::20c:29ff:fe78:c5c7/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1243947 errors:0 dropped:0 overruns:0 frame:0 TX packets:118228 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:98039640 (93.4 MB) TX bytes:24794667 (23.6 MB) Base address:0x1400 Memory:f4820000-f4840000 eth1 Link encap:Ethernet HWaddr 00:0c:29:78:c5:d1 inet addr:10.98.6.6 Bcast:10.98.7.255 Mask:255.255.254.0 inet6 addr: fe80::20c:29ff:fe78:c5d1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1184823 errors:0 dropped:0 overruns:0 frame:0 TX packets:100 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:89172609 (85.0 MB) TX bytes:30206 (29.4 KB) Base address:0x1440 Memory:f4840000-f4860000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:434 errors:0 dropped:0 overruns:0 frame:0 TX packets:434 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:238102 (232.5 KB) TX bytes:238102 (232.5 KB) root@qa-qsuitePBX-01:/etc/kamailio# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.98.6.0 0.0.0.0 255.255.254.0 U 0 0 0 eth0 10.98.6.0 0.0.0.0 255.255.254.0 U 0 0 0 eth1 0.0.0.0 10.98.6.1 0.0.0.0 UG 100 0 0 eth0 0.0.0.0 10.98.6.1 0.0.0.0 UG 100 0 0 eth1 root@qa-qsuitePBX-01:/etc/kamailio#

-----Original Message----- From: Klaus Darilion [mailto:klaus.mailinglists@pernau.at] Sent: Wednesday, May 19, 2010 4:44 PM To: Nelson Pereira Cc: sr-users(a)lists.sip-router.org Subject: Re: [SR-Users] Need help in routing configuration From Kamailio point of view everything is OK. There are just some issues with your network/TCP configuration. Kamailio is unable to open a TCP connection to 10.98.118.20, this can have several reasons: - no route to 10.98.118.20 - at 10.98.118.20 there is no application listening on port 5060 - a firewall between you and 10.98.118.20 - a local network configuration problem It would be useful if you could post your Kamailio "listen=" configuration, an "ifconfig" dump and a "route -n" dump. regards Klaus configuration Am 19.05.2010 20:11, schrieb Nelson Pereira: > I did see that the TM module syntax did change, so I made the > changes in the route, and it looks like this: > > # main request routing logic > > route{ > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > exit; > }; > if (msg:len>= 2048 ) { > sl_send_reply("513", "Message too big"); > exit; > }; > if (loose_route()) { > append_hf("P-hint: rr-enforced\r\n"); > route(1); > }; > if (!uri==myself) { > append_hf("P-hint: outbound\r\n"); > route(1); > }; > route(1); > } > > route[1] > { > if (src_ip==10.98.6.5) { > t_relay_to_tcp("10.98.118.20", "5060"); > } > else { > t_relay_to_tcp(); > } > } > > > This still does not work, im getting the bellow in syslog: > > May 19 14:05:09 qa-qsuitePBX-01 /usr/sbin/kamailio[2215]: > WARNING:<core> [tcp_main.c:1200]: WARNING: tcp_do_connect > 10.98.118.20:5060: could not find corresponding listening socket > for 10.98.6.5, using default... > May 19 14:05:19 qa-qsuitePBX-01 /usr/sbin/kamailio[2227]: > ERROR:<core> [tcp_main.c:3748]: connect 10.98.118.20:5060 failed > (timeout) > May 19 14:05:39 qa-qsuitePBX-01 /usr/sbin/kamailio[2215]: > WARNING:<core> [tcp_main.c:1200]: WARNING: tcp_do_connect > 10.98.118.20:5060: could not find corresponding listening socket > for 10.98.6.5, using default... > May 19 14:05:54 qa-qsuitePBX-01 /usr/sbin/kamailio[2227]: > ERROR:<core> [tcp_main.c:3748]: connect 10.98.118.20:5060 failed > (timeout) > May 19 14:07:53 qa-qsuitePBX-01 /usr/sbin/kamailio[2215]: > WARNING:<core> [tcp_main.c:1200]: WARNING: tcp_do_connect > 10.98.118.20:5060: could not find corresponding listening socket > for 10.98.6.5, using default... > > > > Nelson Pereira > > > -----Original Message----- > From: sr-users-bounces(a)lists.sip-router.org [mailto:sr-users-bounces@lists.sip-router.org > ] On Behalf Of Alex Balashov > Sent: Wednesday, May 19, 2010 2:01 PM > To: sr-users(a)lists.sip-router.org > Subject: Re: [SR-Users] Need help in routing configuration > > You might do well to specify what about it "doesn't work," e.g. log > messages and such. > > If you're using Kamailio 3.0+, the reason is most likely that > t_relay() > invocation syntax has changed: > > http://www.kamailio.org/docs/modules/3.0.x/modules/tm.html#t_relay > > On 05/19/2010 01:41 PM, Nelson Pereira wrote: > >> I have the bellow setup for openser, yet this wont work in Kamilio. >> >> Wondering if anyone could help to make this routing code work? >> >> What Im looking to do is receive Invites in UDP and relaying it >> via TCP…. >> >> route{ >> >> if (!mf_process_maxfwd_header("10")) { >> >> sl_send_reply("483","Too Many Hops"); >> >> exit; >> >> }; >> >> if (msg:len>= 2048 ) { >> >> sl_send_reply("513", "Message too big"); >> >> exit; >> >> }; >> >> if (loose_route()) { >> >> append_hf("P-hint: rr-enforced\r\n"); >> >> route(1); >> >> }; >> >> if (!uri==myself) { >> >> append_hf("P-hint: outbound\r\n"); >> >> route(1); >> >> }; >> >> route(1); >> >> } >> >> route[1] >> >> { >> >> if (src_ip==10.98.6.5) { >> >> if (dst_port==5060) { >> >> t_relay("tcp:10.98.118.20:5060"); >> >> } >> >> if (dst_port==5065) { >> >> t_relay("tcp:10.98.118.20:5065"); >> >> } >> >> else if (dst_port==5066) { >> >> t_relay("tcp:10.98.118.20:5066"); >> >> } >> >> else if (dst_port==5067) { >> >> t_relay("tcp:10.98.118.20:5067"); >> >> } >> >> # else { >> >> # t_relay("tcp:10.98.118.20:5060"); >> >> # } >> >> } >> >> else { >> >> t_relay("udp:10.98.6.5:5060"); >> >> }; >> >> } >> >> *Nelson Pereira* >> >> Senior Network Specialist >> >> Protus<http://www.protus.com/> >> npereira@protus.com<mailto:name@protus.com> >> phone: 613.733.0000 ext.528 >> MyFax: 613.822.5083 >> >> _MyFax.com<http://www.myfax.com/>_ | _my1voice.com >> <http://www.my1voice.com/>_ | _Campaigner.com<http://www.campaigner.com/ >> >_ >> >> >> >> _______________________________________________ >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users >> mailing list >> sr-users(a)lists.sip-router.org >> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > >