I would need to see some debug messages, too. Set debug=9 and
log_stderror=yes in ser config file and run again. Send me the the debug
messages you get in console.
Do you have all hostnames for jabber gateway in DNS. After receiving a
message from a Jabber user MSN messenger starts using the Record
Routing. So next messages have Route headers and the next statement you
have in your config file
if (loose_route()) {
t_relay();
break;
};
sends the request further before hitting the Jabber processing part. If
you would have the hostnames in DNS then the request should be sent via
loopback to itself. I need those debug messages to find out more.
.Daniel
PS. Filtering only sip traffic reduces the size of network dump a lot
(for example, set filter to <port 5060>)
On 3/2/2004 5:16 PM, Délio Filipe Russo Guerra wrote:
Here are the requested network dumps (ethereal network
dumps), and the
ser.cfg file in case you need to see the configuration used.
to make things more readable:
user1 (SIP client) IP: 10.112.64.239
user2 (Jabber client) IP: 10.112.64.121
SER (SIP Express Router) IP: 10.112.64.121
Jabber Server IP: 192.168.89.25
thanks in advance,
Délio Guerra
IT - Instituto de Telecomunicações
Universidade de Aveiro - Portugal
On Tue, 02 Mar 2004 17:02:03 +0100
Daniel-Constantin Mierla <daniel(a)iptel.org> wrote:
Please send me some network dumps. I will check
them.
.Daniel
On 3/2/2004 4:25 PM, Délio Filipe Russo Guerra wrote:
> I'm having a problem putting jabber gateway to work. I'm using SER
> 0.8.12 and microsoft messenger 4.7 as a SIP client and PSI as a
> Jabber client.
>
> I had configured the jabber gateway in ser.cfg and i can talk
> between the to clients (at least for a while).
>
> I'm using user1 as both SIP client and jabber client, and user2 as a
> jabber client only. So the SIP address for the user1 is
> sip:user1@sipserver.sipdomain. user1 also have an jabber account
> user1(a)jabberserver.jabberdomain. user2 as an jabber account
> user2(a)jabberserver.jabberdomain.
>
> I start to talk from user1 (microsoft messenger logged in SIP
> server) to user2 (PSI logged in jabber server) and it works just
> fine. If i continue to talk in this direction i have no problems.
>
> When i start to talk from user2 (PSI logged in jabber server) to
> user1 (microsoft messenger logged in SIP server)
> i have no problems either.
>
> The problem appears when i want to talk again from user1 to user2...
> that is, when i receive the first response from user2 -> user1 it
> blocks the way user1 -> user2.
>
> I've put a sniffer to find out why this appened, and appears that
> after user2 responds, all the events (Ex: INFO for Keyboard
> Activity) or messages from user1->user2 are SIP to jabber server. It
> seams that SER is not using the jabber gateway.
>
> Can anyone help me please...
> Délio Guerra
> IT - Instituto de Telecomunicações
> Universidade de Aveiro - Portugal
>
> _______________________________________________
> Serusers mailing list
> serusers(a)lists.iptel.org
>
http://lists.iptel.org/mailman/listinfo/serusers
>