Re: [Kamailio-Users] FW: Call Hangup from Caller-End not working with TLS

Hi All I am using using openser 1.3..if I make a call between two softphones on the same lan or a a pstn call to my mobile phone..and the called/receiver party does hang-up the call. It works fine in UDP mode and the call get’s hang-up. However in TLS mode this does not work. Anything I might have missed here? Since both udp and tls use the same routes, and voice is fine and no one way audio ..etc. I notice this http://pastebin.com/m38c979f6 on rtp proxy. However in the logs of openser I can’t see any errors. However on the wire shark I can see icmp destination unreachable…port unreachable. I would have said it is a NAT issue. However it works for simple UDP. However I did notice the following in the logs Aug 28 13:41:01 [8565] DBG:tm:set_timer: relative timeout is 4000000 Aug 28 13:41:01 [8565] DBG:tm:insert_timer_unsafe: [7]: 0xb6137794 (45900000) Aug 28 13:41:01 [8565] DBG:tm:retransmission_handler: retransmission_handler : done Aug 28 13:41:02 [8564] DBG:core:parse_msg: SIP Request: Aug 28 13:41:02 [8564] DBG:core:parse_msg: method: <BYE> Aug 28 13:41:02 [8564] DBG:core:parse_msg: uri: <sip:michofr@193.227.186.146:3218;transport=UDP;rinstance=D98C1DD404B2008F980980E97E42F8EC;nat=yes> Aug 28 13:41:02 [8564] DBG:core:parse_msg: version: <SIP/2.0> Aug 28 13:41:02 [8564] DBG:core:parse_headers: flags=2 Aug 28 13:41:02 [8564] DBG:core:parse_via_param: found param type 232, <branch> = Shouldn’t the transport=TLS ? Regards ------------------------------------------------------------------------ _______________________________________________ Users mailing list Users(a)lists.kamailio.org http://lists.kamailio.org/cgi-bin/mailman/listinfo/users