[Serusers] Can’t enable accounting with SER

Hi All, I really need your help. I have setup the ser-0.8.14, uname �a is: Linux lnx01 2.6.9-1.667smp #1 SMP Tue Nov 14:59:52 EST 2004 i686 i386 GNU/Linux I have also setup Radiusclient-0.4.8 and Freeradius-1.0.2. I've followed all the steps in this tutorial http://www.iptel.org/ser/doc/ser_radius/ser_radius.html The installing don�t have any error. I tested on LAN with 1 server 192.168.10.1 and 2 workstations 192.168.10.2 and 192.168.10.3 However, I have received error when start ser. This is my error: 0(7389) find_export: found <db_update> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(7389) ERROR: acc: can't get code for the Failed attribute value 0(7389) init_mod(): Error while initializing module acc ERROR: error while initializing modules 0(7389) DEBUG: tm_shutdown : start 0(7389) DEBUG: tm_shutdown : empting DELETE list I should be most grateful to receive your help. Best regards, Tran Tien Duc ser.cfg debug=8 fork=no log_stderror=yes check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/acc.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" loadmodule "/usr/local/lib/ser/modules/uri_radius.so" loadmodule "/usr/local/lib/ser/modules/group_radius.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) modparam("usrloc","db_url","mysql://ser:heslo@localhost/ser") # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("acc","db_url","mysql://ser:heslo@localhost/ser") modparam("acc","db_flag",1) modparam("acc","log_level",1) modparam("acc","log_flag",1) modparam("acc","radius_config","/usr/local/etc/radiusclient/radiusclient.conf") modparam("acc","radius_flag",1) modparam("acc","radius_missed_flag",2) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; setflag(1); if (method=="INVITE") record_route(); # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); break; }; } --------------------------------- Yahoo! Mail Mobile Take Yahoo! Mail with you! Check email on your mobile phone.