[SR-Users] set_advertised_address

Hello I have a PBX behind NAT. Thus I advertise the public IP, and forwards the port to my PBX. listen=LOCALIP:5070 advertise EXTERNALIP:5070 Now clients can connect to the PBX from the Internet. And also inside the LAN, because I have enabled NAT loopback. However some customers sysadmins complains that NAT loopback is a security risk. I have not been able to find any exploits of this, but the sales and support people asks if it is possible to remove this NAT loopback requirement. I could look at $rd and if it is local, then I could  advertise LOCALIP. I found set_advertised_address("LOCALIP"); set_advertised_address however only seems to modify the latest Via header, not the Record-route, and audio neither works. Could I do something to make this work, or is it a dead end? -- -------------------- Med Liberalistiske Hilsner ---------------------- Civilingeniør, Kjeld Flarup - Mit sind er mere åbent end min tegnebog Sofienlundvej 6B, 7560 Hjerm, Tlf: 40 29 41 49 Den ikke akademiske hjemmeside for liberalismen - www.liberalismen.dk