Hello,

I am using the latest version of the SER (i.e. 0.8.12). I have also installed MySQL and created the tables (using the ser_mysql.sh file). But when I restart the SER, I get an error saying bad configuration file (5 errors). I am using the default configuration file with all the SQL module lines uncommented. Is there some thing that I need to configure apart from this for SER To use MySql? When I disable the SQL option, it works.

Thanks

Santosh

Here is the configuration file:

#

# $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $

#

# simple quick-start config script

#

# ----------- global configuration parameters ------------------------

#debug=3 # debug level (cmd line: -dddddddddd)

#fork=yes

#log_stderror=no # (cmd line: -E)

/* Uncomment these lines to enter debugging mode

debug=7

fork=no

log_stderror=yes

*/

check_via=no # (cmd. line: -v)

dns=no # (cmd. line: -r)

rev_dns=no # (cmd. line: -R)

#port=5060

#children=4

fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database

loadmodule "/usr/local/lib/ser/modules/mysql.so"

loadmodule "/usr/local/lib/ser/modules/sl.so"

loadmodule "/usr/local/lib/ser/modules/tm.so"

loadmodule "/usr/local/lib/ser/modules/rr.so"

loadmodule "/usr/local/lib/ser/modules/maxfwd.so"

loadmodule "/usr/local/lib/ser/modules/usrloc.so"

loadmodule "/usr/local/lib/ser/modules/registrar.so"

# Uncomment this if you want digest authentication

# mysql.so must be loaded !

loadmodule "/usr/local/lib/ser/modules/auth.so"

loadmodule "/usr/local/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

#modparam("usrloc", "db_mode", 0)

# Uncomment this if you want to use SQL database

# for persistent storage and comment the previous line

modparam("usrloc", "db_mode", 2)

# -- auth params --

# Uncomment if you are using auth module

#

modparam("auth_db", "calculate_ha1", yes)

#

# If you set "calculate_ha1" parameter to yes (which true in this config),

# uncomment also the following parameter)

#

modparam("auth_db", "password_column", "password")

# -- rr params --

# add value to ;lr param to make some broken UAs happy

modparam("rr", "enable_full_lr", 1)

# ------------------------- request routing logic -------------------

# main routing logic

route{

# initial sanity checks -- messages with

# max_forwards==0, or excessively long requests

if (!mf_process_maxfwd_header("10")) {

sl_send_reply("483","Too Many Hops");

break;

};

if ( msg:len > max_len ) {

sl_send_reply("513", "Message too big");

break;

};

# we record-route all messages -- to make sure that

# subsequent messages will go through our proxy; that's

# particularly good if upstream and downstream entities

# use different transport protocol

record_route();

# loose-route processing

if (loose_route()) {

t_relay();

break;

};

# if the request is for other domain use UsrLoc

# (in case, it does not work, use the following command

# with proper names and addresses in it)

if (uri=~"^sip:[0-9]*@63.96.9.45") {

if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication

# if (!www_authorize("iptel.org", "subscriber")) {

# www_challenge("iptel.org", "0");

# break;

# };

save("location");

break;

};

# native SIP destinations are handled using our USRLOC DB

if (!lookup("location")) {

sl_send_reply("404", "Not Found");

break;

};

};

# forward to current uri now; use stateful forwarding; that

# works reliably even if we forward from TCP to UDP

if (!t_relay()) {

sl_reply_error();

};

}