Re: [Serusers] messed up with config

now..seems i have played too much it and now m confused as to what went wrong and where # # ----------- global configuration parameters ------------------------ debug=9 # debug level (cmd line: -dddddddddd) fork=no log_stderror=yes # (cmd line: -E) listen=localhost /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/uri.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/acc.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" loadmodule "/usr/local/lib/ser/modules/group_radius.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 2) modparam("auth_radius", "radius_config","/usr/local/etc/radiusclient/radiusclient.conf") #modparam("auth_radius", "service_type", 15) # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("acc", "log_level", 1) modparam("acc", "radius_flag", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { lookup("aliases"); if (method=="REGISTER") { log(1, "REGISTER: Authenticating user\n"); if (!radius_www_authorize("")) { log(1, "REGISTER: challenging user\n"); www_challenge("", "0"); break; }; save("location"); break; };

if (uri=~"^sip:44[127][0-9]+@.*") { if (rewritehostport("pstnrouter:5060")) { if (!t_relay()) { sl_reply_error(); }; } break; } else if (uri=~"^sip:01[0-9]+@.*") { if (!t_relay()) { sl_reply_error(); }; break; }; # account completed transactions via syslog setflag(1); }

log_flag!) */ }; if (method=="BYE" || method=="CANCEL") { log (1, "BYE or CANCEL\n"); setflag(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; if (!t_relay()) { sl_reply_error(); break; }; } _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers