Yes i have followed your tutorial for dialog-states, and it works (rough approximation). Sometimes, lamps became busy or ringing, and no calls are running.

But on register, phone became online, so lamp should be green (terminated state). A notify message with "Dialog" event should be emitted no ? To tell other phone: "Hello, i'm online".

Regards.
Loic.

2015-08-27 15:43 GMT+02:00 Daniel-Constantin Mierla <miconda@gmail.com>:
Register state is for telling whether the device is online or offline.

If you want a lamp for dialog states, then that is via presence/pua dialoginfo modules.

Maybe next tutorial will help a bit:
  - http://kb.asipto.com/kamailio:presence:k43-blf

Cheers,
Daniel


On 27/08/15 14:11, Loic Chabert wrote:
Thanks for this explanation.

I have set pua_set_publish() before running save, and now, publish has been sent to kamailio himself.
Next publish has been recieved, but no notify REQUEST has been sent to subscribed users. As i can see in debug (attached), a Presence event type has been generate, not a dialog event. Is it normal ?

My hardphone (Yealink) subscribed to Event: dialog, not presence event. Kamailio should "convert" this Presence event into a dialog message no ?

Thanks,
Regards.

2015-08-27 12:44 GMT+02:00 Daniel-Constantin Mierla <miconda@gmail.com>:
Hello,

On 27/08/15 12:14, Loic Chabert wrote:
Hello,

pua_set_publish() is run afer save(). Order of function is important ?

 yes, the first is just setting a flag for a callback executed by save in order to know what do to in that callback.


Too many logs with debug=3, do you have a solution to debug only one module, and not all at the same time ?

 Yes, you can have per module debug level, look at debugger module.

Cheers,
Daniel



Regards & thanks.

2015-08-26 12:07 GMT+02:00 Daniel-Constantin Mierla <miconda@gmail.com>:
Hello,

are you still running pua_set_publish() before calling save() of registrar module?

Try to look at logs with debug=3 when a register is processed.

Cheers,
Daniel


On 26/08/15 10:08, Loic Chabert wrote:
Hello,

SIP is sent over UDP.

I have check (on all interface with tcpdump -i any), and now, subscription is OK:
- 102 subscribe to 103, but authentication needed
- 102 subscribe to 103 with authentication informations
- kamailio sent a 200OK, with subscription state OK

But when 103 sent a register and complete it, no loopback publish has been sent, and no notify too.

Regards.


2015-08-26 9:16 GMT+02:00 Daniel-Constantin Mierla <miconda@gmail.com>:
Hello,

watch the sip traffic and see if there are retransmissions not replies as well as look at expires header value for subscribe/public requests. The reason timeout is somehow related to the above.

Again, be sure you look at the traffic on all network interfaces.

Is SIP sent over UDP or TCP/TLS?

Cheers,
Daniel


On 25/08/15 16:07, Loic Chabert wrote:
Thanks Daniel,

Yes a subscribe request as been sent by my hardphone, authentication works, but juste after 200OK, a NOTIFY message as been sent with this header: Subscription-State: terminated;reason=timeout

But, on my SQL table "active_watcher", i can see my user (103) subscribed to 102 dialog events.

Concerning pua_usrloc, all requests PUBLISH from myself are allowed:

    if(is_method("PUBLISH") && from_uri==myself)
        return;

Do you want any copy of debug message at level 3 ?

Thanks.
Regards.

2015-08-25 12:20 GMT+02:00 Daniel-Constantin Mierla <miconda@gmail.com>:
Hello,

do you get subscribe requests from users? A NOTIFY is sent only when there is an active subscription.

Also, be sure you allow traffic on loopback without authentication -- pua_usrloc may send a publish to same sip server instance. Running with debug=3 and looking at syslog should reveal more about what is happening around.

Cheers,
Daniel


On 25/08/15 11:40, Loic Chabert wrote:
Hello everyone,

I'm trying to reproduce BLF's asterisk fonctionnality with kamailio.
With asterisk, on register, NOTIFY message has been sent to all suscribed users. So LED became green.
How can i reproduce this function ?

I have try to execute a "pua_set_publish()" on register route, but it's not work. My led stay "black", and no notify message has been sent.

I have loaded presence, presence_xml, presence_mwi, presence_dialoginfo, pua, pua_dialoginfo, pua_usrloc. Any other module needed ?

Thanks,
Regards.


_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users


-- 
Daniel-Constantin Mierla
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Book: SIP Routing With Kamailio - http://www.asipto.com

_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users



-- 
Daniel-Constantin Mierla
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Book: SIP Routing With Kamailio - http://www.asipto.com


-- 
Daniel-Constantin Mierla
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Book: SIP Routing With Kamailio - http://www.asipto.com


-- 
Daniel-Constantin Mierla
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Book: SIP Routing With Kamailio - http://www.asipto.com


-- 
Daniel-Constantin Mierla
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Book: SIP Routing With Kamailio - http://www.asipto.com