It's in plug-in/isdngw subdirectory.
Jan.
On 19-03 18:42, F.S.Salloum wrote:
Hi,
I cannot find the files in the developer.berlios.de could you please inform me where I can find them?
Regards Sotiris
-----Original Message----- From: Ulrich Abend [mailto:ullstar@iptel.org] Sent: Friday, March 19, 2004 5:20 PM To: serusers@lists.iptel.org Cc: F.S.Salloum Subject: Re: [Serusers] ISDNgw + CAPI
Hi,
I've just updated the ser-isdngw.conf within the sems stable tree to use the
newer len:gt syntax. Apart from that the recommended way to get things going is the following:
get ser stable version (rel_0_8_12), make, make install
get sems stable version (ser_rel_0_8_12),
edit sems-src/plug-in/isdngw/Makefile to enable capi support
make, make install
cp sems-src/plug-in/isdngw/ser-isdngw.conf to /usr/local/ser/etc/ser.cfg
and adjust the commented parameters.
- cp sems-src/plug-in/isdngw/isdngw.conf.sample to /etc/sems/isdngw.conf and
adjust the parameters
- I recommend setting log_stderr=yes and fork=no for both, ser.cfg and
sems.conf, once things are working ok, use forking and log to syslog
- cp -av sems-src/plug-in/isdngw/etc/db to /etc/sems/db and point the db
parameter in ser.cfg to that location
- run ser and check if it comes up correctly
- try to register a SIP phone with your running ser using a valid
PSTN-number
run sems and check if it comes up correctly
Use your SIP phone to call an external PSTN number (Note: if you call a
local number, the call is signalled to the isdngw itself too, as long as you
keep the sample isdngw.conf, which accepts any call on any controller!).
- Use a PSTN phone to call the number, your SIP phone is registered at.
Once you have all this running, I would address more complex setups or integrate isdngw in your existing ser configuration.
I will be offline from now on until 29th, sorry but more than this short help, I cannot give at this time. Please review the README and README.capi files in the isdngw directory, if you have problems. You can also try to find help by
mailing to serusers@lists.iptel.org or sems@lists.iptel.org.
Best regards,
Uli.
On Friday 19 March 2004 09:52, F.S.Salloum wrote:
Dear all,
Has anybody installed ser with sems and isdngw?
I checked the website and i found out a conf file (berlios) but has problems when it calls the vm module.
The CAPI works fine with Asterisk PBX, but i prefer ser in order to develop more advanced hybrid services (HOLD, TRANSFER etc).
Attached you can find the conf files.
Thanks in advance Sotiris
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers