Hello,
great. I got presence... but only when I do not enable
auth.
Is there something I have to look out for when enabling
auth
I've take the stock config for 3.2.0 as packed in the ubuntu package from
the website, implementet your changes and reinit the
database.
Apart from your changes I defined WITH_USRLOCDB,
WITH_PRESENCE, WITH_AUTH,
WITH_MYSQL.
No presence with auth. Presence without auth. Cleared
the db in between.
Any hints
Thanks
Jonathan
When I am using pua_usrloc...
Modify the standard config:
...
loadmodule "usrloc.so"
loadmodule
"pua.so"
loadmodule "pua_usrloc.so"
...
modparam("pua",
"db_url", DBURL)
modparam("pua", "outbound_proxy", "sip:127.0.0.1")
modparam("pua_usrloc",
"default_domain", "<<< whatever the domain your system has
>>>")
modparam("pua_usrloc", "entity_prefix",
"sip")
...
route[REGISTRAR] {
if (is_method("REGISTER"))
{
pua_set_publish();
...
}
...
You
need to make sure Kamailio is listening on the loopback (127.0.0.1) device on
port 5060, or change the pua outbound_proxy modparam to contain a real IP
address and port that Kamailio is using. Setting this outbound_proxy
parameter makes sure Kamailio routes the PUBLISH generated by pua/pua_usrloc
through itself (so that it can be picked up and handle_publish() is called)
instead of using DNS to try and route the request.
Also make sure that
the pua database table was created when you ran kamdbctl to set-up the
database.
Regards,
Peter
On Fri, 2012-01-27 at 15:04 +0100,
Vogt, Jonathan wrote:
Hi
sorry,
I guess I just got
mixed up with all the name, merges, forks and mailinglists...
As I started out with
openser, tried kamailio and just compiled opensips, I would appreaciate a
working sample for openser or kamailio aswell.
I just need a sip
server with presence support for bravis... which for itself does not seem to
support server side presence...
Thanks
Jonathan
Von:
sr-users-bounces@lists.sip-router.org
[mailto:sr-users-bounces@lists.sip-router.org] Im
Auftrag von Carsten Bock
Gesendet: Freitag, 27. Januar 2012
14:55
An: SIP Router -
Kamailio (OpenSER) and SIP Express Router (SER) - UsersMailing
List
Betreff: Re: [SR-Users]
Sample pua_usrloc Config Was:
Enableapplication/pidf+xml
Hi,
this is the wrong mailing list:
This Mailinglist is about OpenSER (the original),
Kamailio, SER and sip-router.org - not
OpenSIPS.
If you have problems with an OpenSIPS configuration or
module, please post it to the OpenSIPS-list.
We can only provide help for our modules.
Thank you,
Carsten
2012/1/27 Vogt, Jonathan <J.Vogt@swp.de>
Hello,
could anyone kindly send me a working config
which does support clients that not support server presence or send me a
link to a working sample configuration. I seem unable to produce a working
config myself.
I have take the source from opensips.org and compiled it.
Taken the conf from http://www.opensips.org/Resources/PuaUsrlocConfig replaced
sip domain and ip and enabled auth
Reset DB and created users
Replaced X-LITE in conf with BRAVIS
useragent.
Tested and did not work...
undid step 4 and used X-LITE 4 for test...
did not work either.
I'm lost here. Any help appreciated.
Thanks
Jonathan
Von: sr-users-bounces@lists.sip-router.org
[mailto:sr-users-bounces@lists.sip-router.org]
Im Auftrag von Peter Dunkley
Gesendet: Donnerstag, 26.
Januar 2012 15:38
An: SIP Router "- Kamailio (OpenSER) and SIP
Express Router (SER) -Users Mailing "List
Betreff: Re: [SR-Users]
Enable application/pidf+xml
Hello,
I think that force_active affects the state of the
SUBSCRIBE dialogs. So, a presentity does not have to explicitly
authorise a watcher. This is not the same as automatically PUBLISH'ing
presence state. I don't believe force_active will do what you want
here as it has nothing to do with the body of the NOTIFY, just the
Subscription-State: SIP header.
Also, I think the problem could be
that X-Lite supports peer-to-peer presence (where the clients exchange
SUBSCRIBEs and NOTIFYs) but does not support server presence (where the
SUBSCRIBEs are from the client to the server, NOTIFYs are from the server to
the client, and the client must PUBLISH to the server).
If you want
the server to automatically PUBLISH for a client that does not support
server presence (so online when you REGISTER and offline when you
un-REGISTER) take a look a
pua_usrloc.
Regards,
Peter
--
Peter Dunkley
Technical Director
Crocodile RCS Ltd
|
_______________________________________________
SIP
Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Carsten Bock
CEO
(Geschäftsführer)
ng-voice GmbH
Schomburgstr. 80
D-22767 Hamburg
/ Germany
http://www.ng-voice.com
mailto:carsten@ng-voice.com
Mobile +49
179 2021244
Office +49 40 34927219
Fax +49 40 34927220
Sitz der
Gesellschaft: Hamburg
Registergericht: Amtsgericht Hamburg, HRB
120189
Geschäftsführer: Carsten Bock
Ust-ID: DE279344284
Hier
finden Sie unsere handelsrechtlichen Pflichtangaben:
http://www.ng-voice.com/imprint/
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Peter Dunkley
Technical Director
Crocodile RCS Ltd
|