Hi
Daniel,
Ok, I
found a configuration error on ser.cfg. On the Jaddress parameter the Ip
address had a sintax error (one of the dots was replaceded by a
comma).
But
now there is another problem:
- When the sip client (messenger)
sends a IM to the Jabber client, the jabber client do not receive the
message but he is "notified" that the sip-client is on-line.
- When the jabber client send an IM
to the sip client the messages is received by the sip
client.
Any
idea of what is going on?
Best
regards,
Toni
You
have to set debug=9 and log_stderror=yes in ser's config file.
Debug
messages will be displayed on console and you can copy/paste in a
file.
If you got that error message, means that ser-jabber gw was
connected to Jabber server, but something was happening and the connection was
broken. So some messages should have been exchanged between ser and Jabber.
Did you check all your network interfaces (I told you in last mail you have to
sniff loopback interface if Jabber server and ser is on the same
machine)?
Regards,
Daniel
Toni Barata (EPS) wrote:
Hi,
I
forgot to tell you that I put the ethereal sniffing the network
and no packet was sent by the ser-jabber gw to the port 5222 on the
jabber server.
I
seems that this is an internal problem on the ser-jabber. Is there a way to
send the logs to a file?
Best regards,
Toni