Could you try the same thing having started voicemail (ans_machine) with parameter '-D 3 -E' or change the configuration parameters 'fork' to 'no', 'stderr' to 'yes' and 'loglevel' to 3 ? Then record the log file and send it to me ?

Thanks for your bug report,

----- Original Message -----

Sent: Friday, June 20, 2003 11:31 PM

Subject: [Serusers] Question about SEMS voicemail

Has anyone tried the voicemail module along with SEMS (Sip Express Media Server)?

I have tried to use it with an ATA 186 phone but I get the following erros:

(13328) ERROR: parse_sdp_line_ex (AmSdp.cpp:317): parse_sdp_line : parameter 'v=' was not found
(process:13354): oRTP-WARNING **: Error receiving udp packet: Socket operation on non-socket.

(process:13354): oRTP-WARNING **: Error receiving udp packet: Socket operation on non-socket.

...... it keeps logging this message .....

Any ideas why is this happening?

I also would like to know what codecs does this voicemail supports?

Is there a way to retrieve the messages by phone or just by email?

Attached are ethereal captures and config files.

##########################

SER.CFG

##########################

# ----------- global configuration parameters ------------------------

debug=3 # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=no

check_via=no            # (cmd. line: -v)
dns=no                  # (cmd. line: -r)
rev_dns=no              # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/acc.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/exec.so"
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/lib/ser/modules/uri.so"
loadmodule "/usr/local/lib/ser/modules/vm.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --
modparam("usrloc", "db_mode", 2)
modparam("usrloc", "timer_interval", 10)

# -- auth params --
modparam("auth", "secret", "alsdkhglaksdhfkloiwr")
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")

# -- tm params --
modparam("tm","ruri_matching",0)

# ------------------------- request routing logic -------------------

# main routing logic

        # initial sanity checks -- messages with
        # max_forwars==0, or excessively long requests
        if (!mf_process_maxfwd_header("10")) {
                sl_send_reply("483","Too Many Hops");
                break;
        };
        if (len_gt( max_len )) {
                sl_send_reply("513", "Message too big");
                break;
        };

        # we record-route all messages -- to make sure that
        # subsequent messages will go through our proxy; that's
        # particularly good if upstream and downstream entities
        # use different transport protocol
        record_route();
        # loose-route processing
        loose_route();

        # Make MSN Messenger happy...
        if (method=="REGISTER") {
                log(1,"Register message\n");
                save("tln_location");
                sl_send_reply("200","ok");
                break;
        };

# Voicemail specific configuration - begin

if(method=="ACK" || method=="INVITE" || method=="BYE"){

t_reply("100","Trying -- just wait a minute !");

                                if(method=="INVITE"){
                                        log(1,"**************** vm start - begin ******************\n");
                                        if(!vm("/tmp/am_fifo","voicemail")){
                                                log("could not contact the answer machine\n");
                                                t_reply("500","could not contact the answer machine");
                                        };
                                        log(1,"**************** vm start - end ******************\n");
                                        break;
                                };

                                if(method=="BYE"){
                                        log(1,"**************** vm end - begin ******************\n");
                                        if(!vm("/tmp/am_fifo","bye")){
                                                log("could not contact the answer machine\n");
                                                t_reply("500","could not contact the answer machine");
                                        };
                                        log(1,"**************** vm end - end ******************\n");
                                        break;
                                };
                        }
                        else {
                             log("could not create new transaction\n");
                             sl_send_reply("500","could not create new transaction");
                        };
                };

# Voicemail specific configuration - end
}

##########################

# $Id: sems.conf.sample,v 1.1 2003/06/17 16:05:01 ullstar Exp $
#
# sems.conf.sample
#
# Sip Express Media Server (sems)
#
# sample configuration file
#
#
# whitespaces (spaces and tabs) are ignored
# comments start with a "#" and may be used inline
#
# example: option=value1, value2 # i like this option
#

##################################
# global parameters #
##################################

# optional parameter: fork={yes|no}
#
# - specifies if sems should run in daemon mode (background)
fork=yes

# optional parameter: stderr={yes|no}
#
# - debug mode: do not fork and log to stderr
stderr=no

# optional parameter: loglevel={0|1|2|3}
#
# - sets log level (error=0, warning=1, info=2, debug=3)
loglevel=1

# optional parameter: fifo_name=<filename>
#
# - path and file name of our fifo file
fifo_name=/tmp/am_fifo

# optional parameter: ser_fifo_name=<filename>
#
# - path and file name of Ser's fifo file
ser_fifo_name=/tmp/ser_fifo

# optional parameter: plugin_path=<path>
#
# - sets the path to the plug-ins
# - may be absolute or relative to CWD
plugin_path=/usr/local/src/answer_machine/lib

##################################
# voicemail specific parameters #
##################################

# optional parameter: announce_path=<path>
#
# - sets the path where announce files are searched for
announce_path=/usr/local/src/answer_machine/wav/

# optional parameter: default_announce=<filename>
#
# - sets the name of the default announce WAV file
#default_announce=/usr/local/src/answer_machine/wav/default.wav
default_announce=default.wav

# optional parameter: max_record=<seconds>
#
# - maximum record time
max_record=30

# optional parameter: smtp_server=<hostname>
#
# - sets address of smtp server
smtp_server=localhost

# optional parameter: smtp_port=<port>
#
# - sets port of smtp server
smtp_port=25

##################################
# module specific parameters #
##################################

# sample isdngw module configuration (external file)
# config.isdngw=/etc/isdngw.conf

# sample isdngw module configuration (inline)
config.isdngw=inline

# parameters for outgoing service (SIP -> PSTN)

# required parameter: outdevices=<dev1>, <dev2>, <dev3>, ...
#
# - specifies which ttyI* devices to use for outgoing telephony calls
# - devices must be fully accessible by the vm process' user
# - the number of devices listed is the maximum of simultaneous
# outgoing phone calls (if not otherwise restricted)
outdevices=/dev/ttyI10, /dev/ttyI11, /dev/ttyI12

# required parameter: outmsn=<msn>
#
# - specifies the default msn for outgoing calls
outmsn=

# optional parameter: lockdir=/where/to/store/logfiles
#
# - specifies the directory where to put the lockfiles
# - default: lockdir=/var/lock
lockdir=/var/lock

# optional parameter: outmaxconn=<number>
#
# - specifies the maximum number of outgoing connections
# - parameter is max-limited by:
# * number of devices specified in outdevices
# * number of available ISDN b-channels
# - setting to 0 or omitting the parameter allows any number of calls
outmaxcon=0

# optional parameter: outlogfile=<file>
#
# - specifies a log file, where all outgoing calls are listed
outlogfile=

# optional parameter: forcenumber=<start of number>
#
# - specifies allowed numbers
# - e.g. forcenumber=030 means allow only numbers starting with 030
forcenumber=

# end of configuration section for isdngw module
config.isdngw=end

# add more module configurations here (inline or external):
#
# config.mymodule=<filename>
# or
# config.mymodule=inline
# ...
# config.mymodule=end