Thanks for the information.
I have both CVS and snapshot
versions. Which one should I use really ?
Both versions do not have xcap
as module. So this config is rejected:
modparam("xcap", "xcap_root", "http://xcap-server.somewhere.com/xcap")
How
can I do that ?
Thanks,
ilker
-----Original
Message-----
From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org]
Sent:
Friday, April 28, 2006 1:53 PM
To: İlker Aktuna (Koç.net)
Cc:
serusers@lists.iptel.org
Subject: Re: [Serusers] IM and presence
problems
> I found the issue with storing message. It was a database
issue.
> I had used the example full configuration from presence handbook;
but I didn't have the database msilo created.
> I think you should add
these to the presence handbook (requirements
> for modules in the example
config)
Good idea! Thanks.
>
> Now I have a problem with
presence. It's not working.
> Everytime I run the client, I receive the
same popup saying that other client is requesting permission to see the
presence.
> But even if I press "allow" each time, the other user can't
see that I'm online.
This will be problem with XCAP server. Do you have
one?
If not set "auth" param of PA module to "none":
modparam("pa", "auth", "none")
If yes, take care that XCAP root given to
client must be the same as XCAP root given to XCAP module (CVS version only!
presence snapshot has this as parameter to PA module):
modparam("xcap", "xcap_root", "http://xcap-server.somewhere.com/xcap")
There
is a possibility of changing the XCAP root during message processing using
function set_xcap_root (CVS version only!):
set_xcap_root("http://...");
There can be another problem - your
clients might use other filename with presence rules on XCAP server than default
"presence-rules.xml". This can be changed using PA module parameter
"pres_rules_file" (CVS
version
only!):
modparam("pa",
"pres_rules_file", "pres-rules.xml")
>
> Could it be that I need
to create other database or tables for presence ?
>
> Btw, I
sometimes get the following error after some PUBLISH messages:
> "Warning:
run_failure_handlers: no UAC support (0, 256)"
>
This might be (I'm
not sure, you have to watch network traffic what happens
there) due to that
sent notification to watcher was rejected with a 4xx
response...
Vaclav
> Apr 28 13:21:33
sesapp /root/sexr/sbin/ser[26607]: MSILO: publish
> offline messages for
sip:200000900568888887@sip.test.net dumped Apr 28
> 13:21:37 sesapp
/root/sexr/sbin/ser[26609]: SIP to XX: PUBLISH from:
>
sip:200000900568888887@sip.test.net to:
>
sip:200000900568888887@sip.test.net
> Apr 28 13:21:40 sesapp
/root/sexr/sbin/ser[26622]: Warning:
> run_failure_handlers: no UAC
support (0, 256) Apr 28 13:21:41 sesapp
> /root/sexr/sbin/ser[26611]: SIP
to XX: PUBLISH from:
> sip:200000900568888887@sip.test.net to:
>
sip:200000900568888887@sip.test.net
> Apr 28 13:21:41 sesapp
/root/sexr/sbin/ser[26611]: MSILO: publish
> offline messages for
sip:200000900568888887@sip.test.net dumped
>
> Thanks,
>
ilker
>
> -----Original Message-----
> From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org]
>
Sent: Friday, April 28, 2006 11:24 AM
> To: ?lker Aktuna (Koç.net)
>
Cc: serusers@lists.iptel.org
> Subject: Re: [Serusers] IM and presence
problems
>
> Hi.
>
> > /root/sexr/sbin/ser[25819]:
Delivering MESSAGE using usrloc
> > /root/sexr/sbin/ser[25817]: MSILO:
MESSAGE forward failed - storing
> > it
> >
/root/sexr/sbin/ser[25817]: ERROR: warning_builder: buffer size
> >
exceeded
> > /root/sexr/sbin/ser[25817]: WARNING: warning skipped --
too big
> >
> > There are 2 errors:
> >
> >
1- message forward fails - how can I understand why ?
>
> May be,
that destination user is not registered or something like that.
> You can
catch network traffic and look into it, where could be problem.
>
>
> 2- when storing with MSILO buffer size exceeds - why ? And how can I fix it
?
>
> I think, that this is not when storing MESSAGE content, but
when sending reply. SER tries to add Warning header inside it and generated text
is too long. This could be probably ignored.
>
> You can look into
database, if the message was
stored.
>
>
Vaclav
>
> >
> > I really need help on these issues.
Please don't ignore my question...
> >
> > Thanks,
>
> ilker
> >
>
>
>
>
>
>
<http://387555.sigclick.mailinfo.com/sigclick/06090304/030C4A02/030148
>
03/15141696.jpg>
>
______________________________________________________________________
>
______________________________________________________________________
> _
Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor
> olabilir.
Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir
sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta
mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj
kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin
cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji
viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici,
bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile -
virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak
hicbir sorumlulugu kabul etmez.
> This message is intended solely for the
use of the individual or entity to whom it is addressed , and may contain
confidential information. If you are not the intended recipient of this
message or you receive this mail in error, you should refrain from making any
use of the contents and from opening any attachment. In that case, please notify
the sender immediately and return the message to the sender, then, delete and
destroy all copies. This e-mail message, can not be copied, published or sold
for any reason. This e-mail message has been swept by anti-virus systems for the
presence of computer viruses. In doing so, however, sender cannot
warrant that virus or other forms of data corruption may not be present and do
not take any responsibility in any occurrence.
>
______________________________________________________________________
>
______________________________________________________________________
>
_
