2 Jun
2004
2 Jun
'04
7:46 a.m.
sorry klaus ,
iam giveing trouble again to you,
iam the root user of the system
so do you think should i keep the dictionary.ser
file in the some other location
so that it can able to read.
one more doubt can we run the ser with the gdb
debugger so that we can trace back step by step?
thanks for sparing time
with regards
rama kanth
--- Klaus Darilion <klaus.mailinglists(a)pernau.at>
wrote:
CVSROOT=:pserver:anonymous@cvs.berlios.de:/cvsroot/radiusclient-ng
ftp://ftp.freeradius.org/pub/radius/freeradius-0.9.3.tar.gz
=== message truncated ===
@
__________________________________
Do you Yahoo!?
Friends. Fun. Try the all-new Yahoo! Messenger.
http://messenger.yahoo.com/
Sorry, I 've no glue. Are the access permissons
sent
correctly?
regards,
klaus
varala ramakanth wrote:
CVSROOT=:pserver:anonymous@cvs.berlios.de:/cvsroot/ser
thanks klaus,
i followed your steps from 1 to 6 successfully
when executing the 7th step
i get the err as
Errors reading dictionary: dict_init:
/usr/local/etc/raddb/dictionary[22]: Couldn't open
dictionary "
/usr/local/etc/radiusclient/dictionary.ser": No
such
file or directory
Errors reading radiusd.conf
i kept in another location i.e in /usr/local/share
and checked with that path also
still the same message so please tell me
where iam going wrong
thanks in advance
one more doubt can we run the ser with the gdb
debugger
so that we can trace back step by step
with regards
rama kanth varala
--- Klaus Darilion <klaus.mailinglists(a)pernau.at>
wrote:
>>it says error in reading the file
>>usr/loca/freeradius/dictionary
>>
>>could not able to open
>>/usr/local/radiusclien/dictionray.ser
>>
>>so what may be the problem
>>
>
>typos in your paths?
>
>I've tried ser+radius once, and it worked fine
with
>me!
>
>Here is the step-by-step tutorial how I did it!
>
>regards,
>klaus
>
>19.4.2004: ser+radius installation on mandrake
10.0;
>klaus darilion
>Note: This installation uses unstable ser,
therefore
>the new
>radiusclient library is necessary
(radiusclient-ng).
>ser 0.8.12 stable still requires the original
radius
library
from:
http://www.mcs.de/~lf/radius
In this setup, radius is only used for
authentication, not for accounting!
1. get ser:
mkdir ser
cd ser/
export
cvs login
cvs co sip_router
cd ..
2. get the new radiusclient
mkdir radiusclient-ng
cd radiusclient-ng/
export
>cvs login
>cvs co radiusclient-ng
>cd ..
>
>3. compile and install the radius client
>cd radiusclient-ng/radiusclient-ng
>./configure
>./make
>su
>./make install
>exit
>cd ../..
>
>4. compile and install ser
>cd ser/sip_router
>make all
>make modules modules=modules/auth_radius
>su
>make install
>cp modules/auth_radius/auth_radius.so
>/usr/local/lib/ser/modules/
>cp rpm/ser.init /etc/init.d/ser
>vi /etc/init.d/ser
>-> change ser=/usr/sbin/ser to
>ser=/usr/local/sbin/ser, save and exit
>-> check if ser starts!
>/etc/init.d/ser start
>ps -A
>--> there should be plenty of ser processes
>/etc/init.d/ser stop
>ps -A
>--> all the ser processes should be stopped
>exit
>cd ../..
>
>5. configure radius client
>--> if the radius server is on another machine,
edit
/usr/local/etc/radiusclient/radiusclient.conf and
set authserver and
acctserver to the proper machine.
--> configure the shared secret for your radius
server in
/usr/local/etc/radiusclient/servers, e.g. I used:
localhost testsecret
--> add ser's sip dictionary (dictionary.ser ) to
the dictionary of the
radius client:
cd ser/sip_router
su
cp etc/dictionary.ser /usr/local/etc/radiusclient/
cat /usr/local/etc/radiusclient/dictionary.ser
>/usr/local/etc/radiusclient/dictionary
exit
cd ../..
6. installing a radius server, in this case
freeradius
-->get freeradius
mkdir freeradius
cd freeradius
wget
>tar -xvzf freeradius-0.9.3.tar.gz
>cd freeradius-0.9.3
>./configure
>make
>su
>make install
>vi /usr/local/etc/raddb/clients.conf
>--> set the shared secret in clients.conf, in my
>case: testsecret for
>127.0.0.1
>vi /usr/local/etc/raddb/dictionary
>--> add the following at the end the dictionary
>file: $INCLUDE
>/usr/local/etc/radiusclient/dictionary.ser
>vi /usr/local/etc/raddb/radiusd.conf
>-->uncomment the word "digest" in the "authorize"
>and "authenticate" section
>vi /usr/local/etc/raddb/users
>-->insert a testuser:
> test Auth-Type := Digest, User-Password == "test"
> Reply-Message = "Hello, test with digest"
>
>7. test the radius server
>--> start freeradus in debug mode