Re: [SR-Users] Kamailio 5.3.8 and RTPengine 9.4.1.1+0~mr9.4.1.1

Hi All, I've been using Kamailio as a proxy for asterisk (with public ips), everything was fine until i've changed the setup to private ips for asterisk. What I did so far: - Kamailio and rtpengine are on a box with 1 public IP. - Asterisk containers on private ips each asterisk has 2 trunks ( 1trunk voip provider 1trunk the Proxy). What works: - Proxy registrations and sip signaling works. What it does not work: - On the asterisk I got only on rtp connexion, my guess is that has something to do with the SDP, asterisk put the private ip in the SDP header. RTPengine is configured using this guide https://github.com/sipwise/rtpengine Can you have a look at the kamailio config, i think i am missing something or do something wrong. Thank you! command to start was: rtpengine --table=42 --listen-ng=127.0.0.1:2223 --interface=public/110.20.20.1 --tos=184 --pidfile=/run/rtpengine.pid --no-fallback and the Kamailio cfg is this: #!KAMAILIO #!define FLT_ACC 1 #!define FLT_ACCMISSED 2 #!define FLT_ACCFAILED 3 #!define FLT_FS 10 #!define FLT_NATS 5 #!define FLB_NATB 6 #!define FLB_NATSIPPING 7 #!define WITH_DEBUG #!define WITH_NAT ## This is the main configuration file for our proxy! ####### Global Parameters ######### #!ifdef WITH_DEBUG debug=4 memdbg=5 memlog=5 log_stderror=yes disable_core_dump=no sip_warning=yes #!else debug=-0 log_stderror=no sip_warning=no disable_core_dump=yes #!endif log_facility=LOG_LOCAL0 fork=yes children=8 auto_aliases=no port=5060 disable_tcp=yes server_id = 1 server_signature=yes server_header="Server: proxy" dns_try_ipv6=no dns_try_naptr=no dns_retr_time=1 dns_retr_no=1 rev_dns=no ####### Modules Section ######## #loadmodule "db_mysql.so" loadmodule "jsonrpcs.so" loadmodule "kex.so" loadmodule "corex.so" loadmodule "tm.so" loadmodule "tmx.so" loadmodule "sl.so" loadmodule "rr.so" loadmodule "pv.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "siputils.so" loadmodule "xlog.so" loadmodule "sanity.so" loadmodule "ctl.so" loadmodule "acc.so" loadmodule "dispatcher.so" loadmodule "path.so" loadmodule "nathelper.so" loadmodule "rtpengine.so" ####### Modules Settings # ----------------- setting module-specific parameters --------------- modparam("xlog", "buf_size", 4096) modparam("xlog", "prefix", "xlog: ") modparam("xlog", "log_facility", "LOG_DAEMON") modparam("xlog", "log_colors", "L_ERR=cr") modparam("xlog", "log_colors", "L_ERR=cr;L_WARN=px") # ----- jsonrpcs params ----- modparam("jsonrpcs", "pretty_format", 1) # ----- tm params ----- modparam("tm", "failure_reply_mode", 3) modparam("tm", "fr_timer", 30000) modparam("tm", "fr_inv_timer", 120000) # ----- rr params ----- modparam("rr", "enable_full_lr", 1) modparam("rr", "append_fromtag", 0) #!ifdef WITH_NAT modparam("nathelper", "received_avp", "$avp(RECEIVED)") modparam("nathelper", "nortpproxy_str", "a=sdpmangled:yes\r\n") modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "sipping_bflag", FLB_NATSIPPING) modparam("nathelper", "sipping_from", "sip:pinger@proxy") # params needed for NAT traversal in other modules modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)") modparam("usrloc", "nat_bflag", FLB_NATB) modparam("rtpengine", "rtpengine_sock", "udp:127.0.0.1:2223") modparam("rtpengine", "rtpengine_retr", 2) modparam("rtpengine", "hash_table_size", 256) modparam("rtpengine", "hash_table_tout", 600) #!endif # ----- registrar params ----- modparam("registrar", "method_filtering", 1) modparam("registrar", "append_branches", 0) modparam("registrar", "max_expires", 3600) modparam("registrar", "gruu_enabled", 1) # ----- acc params ----- modparam("acc", "early_media", 0) modparam("acc", "report_ack", 0) modparam("acc", "report_cancels", 0) modparam("acc", "detect_direction", 0) modparam("acc", "log_flag", FLT_ACC) modparam("acc", "log_missed_flag", FLT_ACCMISSED) modparam("acc", "log_extra", "src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd;src_ip=$si") modparam("acc", "failed_transaction_flag", FLT_ACCFAILED) # ----- dispatcher params ----- modparam("dispatcher", "list_file", "/etc/kamailio/plugins/dispatcher.list") modparam("dispatcher", "xavp_dst", "_dsdst_") modparam("dispatcher", "xavp_ctx", "_dsctx_") modparam("dispatcher", "ds_ping_from", "sip:ping@proxy") modparam("dispatcher", "ds_probing_mode", 1) modparam("path", "use_received", 1) ####### Routing Logic ########### # main request routing logic request_route { # per request initial checks route(REQINIT); # NAT detection route(NATDETECT); if(ds_is_from_list()) { setflag(FLT_FS); } # CANCEL processing if (is_method("CANCEL")) { rtpengine_delete(); if (t_check_trans()) { route(RELAY); } exit; } # handle retransmissions if (!is_method("ACK")) { if(t_precheck_trans()) { t_check_trans(); exit; } t_check_trans(); } # handle requests within SIP dialogs route(WITHINDLG); if (isflagset(FLT_FS)) { route(FROM_WORLD); exit; } ### only initial requests (no To tag) # record routing for dialog forming requests (in case they are routed) # - remove preloaded route headers remove_hf("Route"); if (is_method("INVITE|SUBSCRIBE")) { record_route(); } # account only INVITEs if (is_method("INVITE")) { setflag(FLT_ACC); # do accounting sl_send_reply("100","Trying"); } # handle presence related requests route(PRESENCE); # handle registrations route(REGISTRAR); if ($rU==$null) { # request with no Username in RURI sl_send_reply("484","Address Incomplete"); exit; } # dispatch destinations route(DISPATCH); } route[FROM_WORLD] { record_route(); route(RELAY); exit; } route[RELAY] { if (!t_relay()) { sl_reply_error(); } if (!add_path()) { sl_send_reply("503", "Internal Path Error"); } if (is_method("INVITE|BYE|SUBSCRIBE|UPDATE")) { if(!t_is_set("branch_route")) t_on_branch("MANAGE_BRANCH"); } if (is_method("INVITE|SUBSCRIBE|UPDATE")) { if(!t_is_set("onreply_route")) t_on_reply("MANAGE_REPLY"); } if (is_method("INVITE")) { if(!t_is_set("failure_route")) t_on_failure("MANAGE_FAILURE"); } if (has_body("application/sdp")) { rtpengine_manage(); } append_hf("Supported: path\r\n"); exit; } # Per SIP request initial checks route[REQINIT] { if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; } if(is_method("OPTIONS") && uri==myself && $rU==$null) { sl_send_reply("200","Keepalive"); exit; } if(!sanity_check("1511", "7")) { xlog("L_WARN","Malformed SIP message from $si:$sp\n"); exit; } } # Handle requests within SIP dialogs route[WITHINDLG] { if (has_totag()) { # sequential request withing a dialog should # take the path determined by record-routing if (loose_route()) { if (is_method("BYE")) { rtpengine_delete(); setflag(FLT_ACC); # do accounting ... setflag(FLT_ACCFAILED); # ... even if the transaction fails } else if ( is_method("ACK") ) { # ACK is forwarded statelessly route(NATMANAGE); } else if ( is_method("NOTIFY") ) { # Add Record-Route for in-dialog NOTIFY as per RFC 6665. record_route(); } route(RELAY); # exit; } else { if (is_method("SUBSCRIBE") && uri == myself) { # in-dialog subscribe requests route(PRESENCE); exit; } if ( is_method("ACK") ) { if ( t_check_trans() ) { # non loose-route, but stateful ACK; must be ACK after a 487 or e.g. 404 from upstream server t_relay(); exit; } else { # ACK without matching transaction ... ignore and discard. exit; } } sl_send_reply("404","Not here"); } exit; } } # Handle SIP registrations route[REGISTRAR] { if(!is_method("REGISTER")) return; if(isflagset(FLT_NATS)) { setbflag(FLB_NATB); } if (!add_path_received()) { sl_send_reply("503", "Internal Path Error"); }; route(DISPATCH); } # Presence server route route[PRESENCE] { if(!is_method("PUBLISH|SUBSCRIBE")) return; sl_send_reply("404", "Not found"); exit; } # Dispatch requests route[DISPATCH] { # to add more servers in k8s if (!ds_select_dst("1", "4")) { send_reply(503, "Service Unavailable $fd"); exit; } t_on_failure("RTF_DISPATCH"); route(RELAY); exit; } # Caller NAT detection route[NATDETECT] { #!ifdef WITH_NAT if (nat_uac_test("3")) { if (is_method("REGISTER")) { xlog("L_WARN", "natdetect fix_nated_register ip: $si\n"); fix_nated_register(); } else { xlog("L_WARN", "natdetect set_contact_alias ip: $si\n"); fix_nated_contact(); } force_rport(); } if (has_body("application/sdp") && nat_uac_test("8")) { xlog("L_WARN", "sdp fix ip: $si\n"); fix_nated_sdp("10"); } #!endif return; } # RTPProxy control and signaling updates for NAT traversal route[NATMANAGE] { #!ifdef WITH_NAT if (is_request()) { if(has_totag()) { if(check_route_param("nat=yes")) { setbflag(FLB_NATB); } } } if (!(isflagset(FLT_NATS) || isbflagset(FLB_NATB))) return; if(nat_uac_test("8")) { xlog("L_WARN", "nat_uac_test 1..."); rtpengine_manage("replace-origin replace-session-connection direction=public ICE=force"); } else { xlog("L_WARN", "nat_uac_test addrtp..."); rtpengine_manage("codec-strip-all codec-transcode-PCMA codec-transcode-PCMU codec-transcode-G729 replace-origin replace-session-connection direction=public ICE=force "); } if (is_request()) { if (!has_totag()) { if(t_is_branch_route()) { add_rr_param(";nat=yes"); } } } if (is_reply()) { if(isbflagset(FLB_NATB)) { if(is_first_hop()) set_contact_alias(); } } #!endif return; } # Manage outgoing branches branch_route[MANAGE_BRANCH] { xlog("L_WARN", "new branch [$T_branch_idx] to $ru\n"); route(NATMANAGE); } # Manage incoming replies onreply_route[MANAGE_REPLY] { xlog("L_WARN", "incoming reply\n"); if(status=~"[12][0-9][0-9]") { route(NATMANAGE); } if (has_body("application/sdp")) { rtpengine_manage(); } } onreply_route[REPLY_ROUTE] { if(status=~"2[0-9][0-9]") { rtpengine_answer("replace-session-connection replace-origin"); } if (has_body("application/sdp")) { rtpengine_offer(); } } # Manage failure routing cases failure_route[MANAGE_FAILURE] { xlog("L_WARN", "failure route\n"); route(NATMANAGE); if (t_is_canceled()) exit; } # Try next destionations in failure route failure_route[RTF_DISPATCH] { if (t_is_canceled()) { exit; } # next DST - only for 500 or local timeout if (t_check_status("500") or (t_branch_timeout() and !t_branch_replied())) { if(ds_next_dst()) { xlog("Retrying to <$ru> via <$du> (attrs: $xavp(_dsdst_=>attrs))\n"); t_on_failure("RTF_DISPATCH"); route(RELAY); exit; } } } __________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions * sr-users(a)lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender! Edit mailing list options or unsubscribe: * https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users