Dear Daniel, Now the new issue. Seems now openser is trying to talk with radius server. But still I am getting the one error in syslog which is as follows.
rc_send_server: no reply from RADIUS server 128-185-38-162.totisp.net:1812
Actually I have written only 128.185.38.162 in auth_server in radiusclient.conf. I don't know how this totisp.net is added. I haven't mentioned it anywhere.
Please help me. Thanks.
Regards, Pratik
On Mon, Aug 2, 2010 at 11:44 AM, Pratik Shrestha pratikdbl@gmail.comwrote:
Dear Daniel,
Before I work for the new version, I am first trying to configure old version of openser and radius. I am using openser version 1.0.1 and radius client version 0.5.1 and I am following the tutorial given in http://kamailio.net/docs/openser-radius-1.0.x.html.
My freeradius server is in another machine and when I use radclient to check the user I made, I get the "Authenticated" message. But when I use X-lite and connect to openser, it seems openser is not talking with freeradius servers. I am sure the "secret" I am using is right as I have already tested from radclient. The log which I am getting in openser is as shown below
9(1986) SIP Request: 9(1986) method: <REGISTER> 9(1986) uri: sip:192.168.0.56 9(1986) version: <SIP/2.0> 9(1986) parse_headers: flags=2 9(1986) Found param type 232, <branch> = <z9hG4bK-d8754z-c33212005635f16c-1---d8754z->; state=6 9(1986) Found param type 235, <rport> = <n/a>; state=17 9(1986) end of header reached, state=5 9(1986) parse_headers: Via found, flags=2 9(1986) parse_headers: this is the first via 9(1986) After parse_msg... 9(1986) preparing to run routing scripts... 9(1986) parse_headers: flags=100 9(1986) DEBUG:maxfwd:is_maxfwd_present: value = 70 9(1986) parse_headers: flags=10 9(1986) DEBUG:parse_to:end of header reached, state=9 9(1986) DEBUG: get_hdr_field: <To> [44]; uri=[sip:101%40kamailio.org@ 192.168.0.56] 9(1986) DEBUG: to body ["101"sip:101%40kamailio.org@192.168.0.56 ] 9(1986) DEBUG: add_param: tag=cc6e4259 9(1986) DEBUG:parse_to:end of header reached, state=29 9(1986) radius_is_user_in(): Failure 9(1986) parse_headers: flags=200 9(1986) get_hdr_field: cseq <CSeq>: <2> <REGISTER> 9(1986) DEBUG: get_hdr_body : content_length=0 9(1986) found end of header 9(1986) find_first_route: No Route headers found 9(1986) loose_route: There is no Route HF 9(1986) grep_sock_info - checking if host==us: 12==9 && [192.168.0.56] == [127.0.0.1] 9(1986) grep_sock_info - checking if port 5060 matches port 5060 9(1986) grep_sock_info - checking if host==us: 12==12 && [192.168.0.56] == [192.168.0.56] 9(1986) grep_sock_info - checking if port 5060 matches port 5060 9(1986) grep_sock_info - checking if host==us: 12==9 && [192.168.0.56] == [127.0.0.1] 9(1986) grep_sock_info - checking if port 5060 matches port 5060 9(1986) grep_sock_info - checking if host==us: 12==12 && [192.168.0.56] == [192.168.0.56] 9(1986) grep_sock_info - checking if port 5060 matches port 5060 9(1986) check_nonce(): comparing [4c5649b2d78b205e6a5ca1c6dcdc54b84445dd9c] and [4c5649b2d78b205e6a5ca1c6dcdc54b84445dd9c] 9(1986) ERROR:auth_radius:radius_authorize_sterman: rc_auth failed 9(1986) build_auth_hf(): 'WWW-Authenticate: Digest realm="192.168.0.56", nonce="4c5649b2d78b205e6a5ca1c6dcdc54b84445dd9c" ' 9(1986) parse_headers: flags=ffffffffffffffff 9(1986) check_via_address(192.168.0.148, 192.168.182.3, 0) 9(1986) DEBUG:destroy_avp_list: destroying list (nil) 9(1986) receive_msg: cleaning up
At freeradius also, no request goes from openser.
Please advise me how to get rid of this problem.
Best Regards, Pratik
On Wed, Jul 28, 2010 at 5:56 PM, Pratik Shrestha pratikdbl@gmail.comwrote:
Thanks a lot. I will give it a try
Pratik
On Wed, Jul 28, 2010 at 3:48 PM, Daniel-Constantin Mierla < miconda@gmail.com> wrote:
Hello,
On 7/22/10 6:06 AM, Pratik Shrestha wrote:
Dear All,
I am very new to OpenSer. I want to use latest version of OpenSer with Radius. I need the documentation/tutorial on how to do this. Googling, Ionly found for the old version. Please help me.
indeed, there is a rather old version:
http://www.kamailio.org/docs/openser-radius-1.0.x.html
What I can say now is that you can skip the part of installing kamailio and use next link instead: http://www.kamailio.org/dokuwiki/doku.php/install:kamailio-3.0.x-from-git
Radius client library is now in most of common Linux distributions, so you can install it with the package manager (you need the devel headers as well, the -dev package).
FreeRadius configuration should be more or less the same.
The config of kamailio has changed quite a lot. Use the default one from kamailio, follow the WITH_AUTH define conditions and replace auth_db with auth_radius modules and functions. Also, the rest of radius modules were merged into misc_radius. For enabling radius acc, you need to recompile acc module after editing the Makefile in module directory.
Hope it helps to start, ask here if you get stuck.
Cheers, Daniel
-- Daniel-Constantin Mierla http://www.asipto.com/