23 Mar
2020
23 Mar
'20
12:32 p.m.
Hello,
also check if code from sst module is executing when processing the
dialog. Maybe the callback functions from sst are not called when dialog
is handling the sip traffic. You should run with debug=3 and look at the
debug messages to see if there are some printed from sst module. Watch
also for other error or warning log messages, they may indicate that
some processing could not be done.
Eventually you can make the debug messages (from kamailio start to
processing of the dialog) available somewhere online (e.g., pastebin) so
we can look at them and analyze.
Cheers,
Daniel
On 22.03.20 15:23, Daniel-Constantin Mierla wrote:
Hello,
ah, ok, I misunderstood.
Is the INVITE received with the header Session-Expires?
And remove the line:
#!define DLG_TIMEOUT_AVP "i:1"
It does not replaces the token inside strings, like inside the last
parameter of the line:
modparam("dialog", "timeout_avp", "$avp(DLG_TIMEOUT_AVP)")
and if you use in config expressions $avp(DLG_TIMEOUT_AVP), then its
name is replaced. So overall it can be two avp names, although when
reading looks like one.
Cheers,
Daniel
On 22.03.20 14:40, harneet singh wrote:
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Hi Daniel,
Thanks for the confirmation. Your point confirms the same as I
interpreted from the documentation, that Kamailio would not send
refresh INVITEs. I am not expecting to achieve that. However, if i
understand correctly, Kamailio can look into the "Session-Expires"
header from UAC/UAS and set the timeout_avp based on that.
In effect, Kamailio should ideally *tear down the call (Send a BYE to
UAC and UAS)*, if it doesn't see any signalling(may it be
session-refresh INVITE/UPDATE or any other mid-dialog messages). This
i believe can be done by using the SST Module in conjunction with the
Dialog Module.
I am also using the SST Module and the Dialog Module, however have
the following issues.
1. I am seeing the following message when sending Session-Expires: 200 .
""dialog [dlg_handlers.c:681]: *get_dlg_timeout(): invalid AVP
value, using default timeout*"
Not sure what is causing this.
2. If i try to hardcode the session-expires to a certain value, the
Kamailio DOES send a BYE to UAC and UAS on the timer expiry if no
signaling seen during that time. However, as pointed earlier, the
Dialog Load on the Kamailio DOES NOT go down, as shown in the last email.
FWIW, here's the config snippet from the Kamailio cfg i am using.
==========================================================================
#!define *DLG_TIMEOUT*_AVP "i:1"
# ----------- dialog params -----------
modparam("dialog", "send_bye", 1)
*modparam("dialog", "timeout_avp",
"$avp(DLG_TIMEOUT_AVP)")*
modparam("dialog", "dlg_flag", 5)
# ----------- sst params -----------
modparam("sst", "enable_stats", 1)
modparam("sst", "min_se", 150)
# Set the sst modules timeout_avp to be the same value
*modparam("sst", "timeout_avp", "$avp(DLG_TIMEOUT_AVP)")*
#modparam("sst", "reject_to_small", 1)
modparam("sst", "sst_flag", 6)
request_route {
.......
.......
# account only INVITEs
if (is_method("INVITE")) {
setflag(FLT_ACC); # do accounting
setflag(5); # set the dialog flag
setflag(6); # Set the sst flag
$dlg_ctx(timeout_bye)=1;
if (sstCheckMin("1")) {
xlog("L_ERR", "422 Session Timer Too Small reply
sent.\n");
exit;
}
}
.....
......
}
==========================================================================
From the SST documentation, it pretty much seems like the only config
to do. Am I missing something. If you have a working config for the
Kamailio tuned in this manner using the SST and Dialog Module, could
you share the same?
Any pointers to make it work are most welcome.
Regards,
Harneet
On Sun, Mar 22, 2020 at 3:01 PM Daniel-Constantin Mierla
<miconda(a)gmail.com <mailto:miconda@gmail.com>> wrote:
Hello,
are you looking for Kamailio to send re-INVITEs? If yes, that is
not available as a feature of dialog module.
Cheers,
Daniel
On 21.03.20 10:39, harneet singh wrote:
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda Hi,
I am fairly new to Kamailio and had a question regarding how to
use Kamailio to enable Session refresh functionality when
Kamailio is acting as Sip Stateful Proxy.
Kamailio Version used: *5.3.2* with *Call Load based routing*
using the *dispatcher *module.
* From what i understand from the documentation, Kamailio will
probably not be acting as a session refresher, but Kamailio can
tear down the call in case session refresh is negotiated,
between the caller and the callee(via Kamailio Sip Proxy), and
no message exchange happens in the duration set in
Session-Expires header. *Is my understanding correct?*
*
*
** *I believe the above functionality is possible by using the
*sst* and *dialog* module. I have set the same according to the
documentation but I keep getting the following error:
"dialog [dlg_handlers.c:681]: *get_dlg_timeout(): invalid AVP
value, using default timeout*"
Can someone share a working example?
* When i tried hardcoding the timeout value by setting the
timeout_avp to a specific value, Kamailio did sense a timeout
and hence sent a BYE towards the caller and the Callee side
both(which is what the requirement is), however, i do see the
*dialog is still not cleared* in the "kamcmd dispatcher.list".
Output excerpt below for reference:
[root@CPaaSVM ~]# kamcmd dispatcher.list
{
NRSETS: 1
RECORDS: {
SET: {
ID: 1
TARGETS: {
DEST: {
URI:
sip:172.27.44.121:5080;transport=tcp
FLAGS: AP
PRIORITY: 0
ATTRS: {
BODY:
duid=sample-cas;maxload=1000
DUID: sample-cas
MAXLOAD: 1000
WEIGHT: 0
RWEIGHT: 0
SOCKET:
}
LATENCY: {
AVG: 111.304000
STD: 1042.193000
EST: 2.385000
MAX: 9999
TIMEOUT: 1
}
RUNTIME: {
DLGLOAD: *1*
}
}
}
}
}
}
It is noteworthy that in case the BYE is initiated by either the
caller or the callee, the dialog is cleared properly and the
DLGLOAD is set to 0 on call termination.
Any pointers for the above questions would be highly appreciated.
Regards,
Harneet
--
"Once you eliminate the impossible, whatever remains, no matter
how improbable, must be the truth" - Sir Arthur Conan Doyle
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
--
"Once you eliminate the impossible, whatever remains, no matter how
improbable, must be the truth" - Sir Arthur Conan Doyle