Re: [SR-Users] Transport issue thought

The INVITE has no port assigned in ruri, so I assume it is using the default port of 5060; the ACK does have 5060 in the ruri. Even if a new connection is created shouldn’t it be using the listen tcp port since I have tcp_reuse_port=yes? Thank you! *From:* sr-users [mailto:sr-users-bounces@lists.kamailio.org] *On Behalf Of *Federico Cabiddu *Sent:* Friday, May 18, 2018 8:49 AM *To:* Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org> *Subject:* Re: [SR-Users] Transport issue thought Can you print the logs when it tries to send the ACK? Check also that the ACK ruri contains the same destination port which was used for the INVITE, otherwise a new connection will be created. Best regards, Federico On Fri, May 18, 2018 at 2:31 PM, Wilkins, Steve <swwilkins(a)mitre.org> wrote: Thank you Alex and Federico, I verified, and SO_REUSEPORT is defined on my OS. I am using Kamailio 5.2 and I set ‘tcp_reuse_port=yes;’ and $fs; this has been to no avail as ‘ACK’s’ are still using the high port number randomly assigned by Kamailio. Thank you all for sharing your knowledge! *From:* sr-users [mailto:sr-users-bounces@lists.kamailio.org] *On Behalf Of *Federico Cabiddu *Sent:* Friday, May 18, 2018 12:57 AM *To:* Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org> *Subject:* Re: [SR-Users] Transport issue thought You are right Alex, Linux kernel didn't support SO_REUSEPORT, which allows a socket to be used as source for a tcp connection while is already bound, until version 3.9. Kamailio's parameter tcp_reuse_port, if enabled and your OS has support for SO_REUSEPORT (so not only Linux but FreeBSD, OSX and others), allows you to use force_send_socket (or $fs) to send messages from a TCP port kamailio is listening to. Cheers, Federico On Fri, May 18, 2018 at 12:28 AM, Alex Balashov <abalashov(a)evaristesys.com> wrote: When an outgoing TCP connection is opened, either a port can be explicitly bound, or it is auto-assigned by the OS's networking stack. I believe Kamailio does the latter and does not offer options to constrain the range. If it does, I'm not aware of any apart from this one: https://www.kamailio.org/wiki/cookbooks/5.1.x/core#tcp_reuse_port Not sure if it would help in this case, you'd have to give it a try. On Thu, May 17, 2018 at 10:21:34PM +0000, Wilkins, Steve wrote: Kamailio is randomly assigning large port numbers to send the TCP traffic out on. way to tell Kamailio to only use specific ports for this. I have tried using on, but this did not work either. Does this sound like I am on the right track? -- Alex Balashov | Principal | Evariste Systems LLC Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free) Web: http://www.evaristesys.com/, http://www.csrpswitch.com/ _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users