Re: [Serusers] nathelper ERROR: extract_mediaip: no `c=' in SDP

Thanks Marian's help and answer. I can make a call from domainA to domainB via PDT module. But I got another error message from nathelper or rtpproxy. It is "ERROR: extract_mediaip: no `c=' in SDP" from /var/log/messages. I also find this message at source code of nathelper. So I think it should happen from this module. It seems voice channel can't pass throught it. I make a call from UA_A ( under NAT ) from domainA and using PDT to redirect to UA_B via domainB. UA_B has ring and it can answer. I can hear the UA_A's sound from UA_B. The sound of UA_B is failed to UA_A. UA_A(NAT) ==> domainA(PDT) ==> domainB(nathelper+rptproxy) ==> UA_B(NAT) SOUND_A ==========================================> UA_B UA_A <===== XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX === SOUND_B Do I put the prefix2domain() in a wrong place?? Or Is it a bug ofi nathelper & rtpproxy? And my ser.cfg as below: Best Regard. Charles # # $Id: ser.cfg,v 1.25 2004/11/30 16:28:24 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=8 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */ listen=xxx.xxx.xxx.xxx alias=ser.xxx.net alias=ser alias=xxx.xxx.xxx.xxx check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo_mode=0666 fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@localhost/ser" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/textops.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # !! Nathelper loadmodule "/usr/local/lib/ser/modules/nathelper.so" loadmodule "/usr/local/lib/ser/modules/exec.so" loadmodule "/usr/local/lib/ser/modules/avpops.so" loadmodule "/usr/local/lib/ser/modules/domain.so" loadmodule "/usr/local/lib/ser/modules/group.so" loadmodule "/usr/local/lib/ser/modules/uri.so" loadmodule "/usr/local/lib/ser/modules/uri_db.so" loadmodule "/usr/local/lib/ser/modules/permissions.so" loadmodule "/usr/local/lib/ser/modules/speeddial.so" loadmodule "/usr/local/lib/ser/modules/acc.so" loadmodule "/usr/local/lib/ser/modules/pdt.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) modparam("usrloc", "db_mode", 1) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # -- nathelper params -- modparam("registrar", "nat_flag", 6) modparam("nathelper", "natping_interval", 30) # Ping interval 30 s modparam("nathelper", "ping_nated_only", 1) # Ping only clients behind NAT # -- db_url params -- modparam("acc|auth_db|domain|group|permissions|speeddial|uri_db|usrloc|pdt", "db_url", "mysql://ser:heslo@localhost/ser") # -- use_domain params -- modparam("auth_db|group|registrar|speeddial|uri_db|usrloc", "use_domain", 0) # -- permissions params -- modparam("permissions", "db_mode", 1) modparam("permissions", "trusted_table", "trusted") # -- accounting params -- modparam("acc", "db_flag", 1) modparam("acc", "db_missed_flag", 1) modparam("acc", "log_fmt", "cdfimorstup") modparam("acc", "log_level", 1) modparam("acc", "failed_transactions", 1) modparam("acc", "report_cancels", 1) modparam("acc", "report_ack", 0) # -- domain params -- modparam("domain", "db_mode", 1) # -- avp params -- modparam("avpops", "avp_url", "mysql://ser:heslo@localhost/ser") modparam("avpops", "avp_table", "usr_preferences") #modparam("avpops", "use_domain", "1") modparam("avpops", "uuid_column", "uuid") modparam("avpops", "username_column", "username") modparam("avpops", "domain_column", "domain") modparam("avpops", "attribute_column", "attribute") modparam("avpops", "value_column", "value") modparam("avpops", "type_column", "type") modparam("avpops", "avp_aliases", "voicemail=i:500;calltype=i:700;fwd_no_answer_type=i:701;fwd_busy_type=i:702") # To use more than one tables example #modparam("avpops", "db_scheme", "scheme1:table=subscriber;uuid_column=uuid;value_column=first_name") # -- tm params -- modparam("tm", "fr_timer", 15) modparam("tm", "fr_inv_timer", 22) modparam("tm", "wt_timer", 5) modparam("tm", "fr_inv_timer_avp", "inv_timeout") # -- pft params -- modparam("pdt", "db_table", "prefix_domain") modparam("pdt", "prefix", "") #modparam("pdt", "start_range", 2000) #modparam("pdt", "terminator", 0) modparam("pdt", "hsize_2pow", 2) modparam("pdt", "sync_time", 300) modparam("pdt", "clean_time", 600) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= max_len ) { sl_send_reply("513", "Message too big"); break; }; if (method=="INVITE" || method=="BYE") { setflag(1); }; # !! Nathelper # Special handling for NATed clients; first, NAT test is # executed: it looks for via!=received and RFC1918 addresses # in Contact (may fail if line-folding is used); also, # the received test should, if completed, should check all # vias for rpesence of received if (nat_uac_test("3")) { # Allow RR-ed requests, as these may indicate that # a NAT-enabled proxy takes care of it; unless it is # a REGISTER if (method == "REGISTER" || ! search("^Record-Route:")) { log("SER: Someone trying to register from private IP, rewriting\n"); # This will work only for user agents that support symmetric # communication. We tested quite many of them and majority is # smart enough to be symmetric. In some phones it takes a configuration # option. With Cisco 7960, it is called NAT_Enable=Yes, with kphone it is # called "symmetric media" and "symmetric signalling". fix_nated_contact(); # Rewrite contact with source IP of signalling if (method == "INVITE") { fix_nated_sdp("1"); # Add direction=active to SDP }; force_rport(); # Add rport parameter to topmost Via setflag(6); # Mark as NATed }; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; prefix2domain(); if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("ser.xxx.net", "subscriber")) { www_challenge("ser.xxx.net", "0"); break; }; save("location"); break; }; - lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { # !! Nathelper if (uri=~"[@:](192\.168\.|10\.|172\.(1[6-9]|2[0-9]|3[0-1])\.)" && !search("^Route:")){ sl_send_reply("479", "We don't forward to private IP addresses"); break; }; # if client or server know to be behind a NAT, enable relay if (isflagset(6)) { force_rtp_proxy(); }; # NAT processing of replies; apply to all transactions (for example, # re-INVITEs from public to private UA are hard to identify as # NATed at the moment of request processing); look at replies t_on_reply("1"); # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; } On Thu, 17 Feb 2005 12:49:10 +0100, Marian Dumitru &lt;marian.dumitru(a)voice-sistem.ro&gt; wrote: _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers