Hi!I've 2 asterisk at home and I use openser becouse I want use more proxies for my softphones;my problem is this:

I'm using vrrp protocol;

192.168.25.1 is the master   (asterisk1)

192.168.25.2 is the slave      (asterisk2)

192.168.25.200 is the virtual IP.

then I have my softphones on a Xp pc with IP 192.168.25.10

 

I set my softphones with 192.168.25.200 and they run, only that, the problem with asterisk is that softphones and IP phones(some like wi-fi) can register only one proxy, and asterisk can't make a option for more proxies than one;so the proxy is the 192.168.25.200, but at real it is 192.168.25.1..and softphones or wi-fi are registered only in the first asterisk with the 192.168.25.1..if the master falls down the slave hasn't the authentication SIP registration...only the master..So I must use openser or ser to have 2 = box

 

my problem is resolved only if I use the redirect option to have 2 = asterisk box so the database can be opened and read from one asterisk to the other;if the master falls down the slave has all the configuration and the SIP registration, so it can work without problems.

 

A) I've set this file on asterisk 192.168.25.1 the master

#
# $Id: replicate.cfg,v 1.2 2005/07/25 16:27:33 miconda Exp $
#
# demo script showing how to set-up usrloc replication
#

# ----------- global configuration parameters ------------------------

debug=3          # debug level (cmd line: -dddddddddd)
fork=no
log_stderror=yes # (cmd line: -E)

# ------------------ module loading ----------------------------------

loadmodule "modules/mysql/mysql.so"
loadmodule "modules/sl/sl.so"
loadmodule "modules/tm/tm.so"
loadmodule "modules/maxfwd/maxfwd.so"
loadmodule "modules/usrloc/usrloc.so"
loadmodule "modules/registrar/registrar.so"
loadmodule "modules/auth/auth.so"
loadmodule "modules/auth_db/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# digest generation secret; use the same in backup server;
# also, make sure that the backup server has sync'ed time
modparam("auth", "secret", "alsdkhglaksdhfkloiwr")

# -------------------------  request routing logic -------------------

# main routing logic

route{

 # initial sanity checks -- messages with
 # max_forwars==0, or excessively long requests
 if (!mf_process_maxfwd_header("10")) {
  sl_send_reply("483","Too Many Hops");
  return;
 };
 if (len_gt( max_len )) {
  sl_send_reply("513", "Message too big");
  return;
 };

 # if the request is for other domain use UsrLoc
 # (in case, it does not work, use the following command
 # with proper names and addresses in it)
 if (uri==myself) {

  if (method=="REGISTER") {

   # verify credentials
   if (!www_authorize("", "subscriber")) {
    www_challenge("", "0");
    return;
   };

   # if ok, update contacts and ...
   save("location");
   # ... if this REGISTER is not a replica from our
   # peer server, replicate to the peer server
   if (!src_ip== 192.168.25.2) {
    t_replicate("192.168.25.2", "5060");
   };
   return;
  };
  # do whatever else appropriate for your domain
  log("non-REGISTER\n");
 };
}

 

 

#
# $Id: replicate.cfg,v 1.2 2005/07/25 16:27:33 miconda Exp $
#
# demo script showing how to set-up usrloc replication
#

# ----------- global configuration parameters ------------------------

debug=3          # debug level (cmd line: -dddddddddd)
fork=no
log_stderror=yes # (cmd line: -E)

# ------------------ module loading ----------------------------------

loadmodule "modules/mysql/mysql.so"
loadmodule "modules/sl/sl.so"
loadmodule "modules/tm/tm.so"
loadmodule "modules/maxfwd/maxfwd.so"
loadmodule "modules/usrloc/usrloc.so"
loadmodule "modules/registrar/registrar.so"
loadmodule "modules/auth/auth.so"
loadmodule "modules/auth_db/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# digest generation secret; use the same in backup server;
# also, make sure that the backup server has sync'ed time
modparam("auth", "secret", "alsdkhglaksdhfkloiwr")

# -------------------------  request routing logic -------------------

# main routing logic

route{

 # initial sanity checks -- messages with
 # max_forwars==0, or excessively long requests
 if (!mf_process_maxfwd_header("10")) {
  sl_send_reply("483","Too Many Hops");
  return;
 };
 if (len_gt( max_len )) {
  sl_send_reply("513", "Message too big");
  return;
 };

 # if the request is for other domain use UsrLoc
 # (in case, it does not work, use the following command
 # with proper names and addresses in it)
 if (uri==myself) {

  if (method=="REGISTER") {

   # verify credentials
   if (!www_authorize("", "subscriber")) {
    www_challenge("", "0");
    return;
   };

   # if ok, update contacts and ...
   save("location");
   # ... if this REGISTER is not a replica from our
   # peer server, replicate to the peer server
   if (!src_ip== 192.168.25.1) {
    t_replicate("192.168.25.1", "5060");
   };
   return;
  };
  # do whatever else appropriate for your domain
  log("non-REGISTER\n");
 };
}

Must I call this file ser.cfg?Right?Must I set the

on the master

listen=192.168.25.1  #on the master 

port=5060

on the slave

listen=192.168.25.2  #on the slave

port=5060

 

Then I use on all the 2 linux;

#chkconfig -add ser

#chkconfig -add mediaproxy

And ser and mediaproxy works like deamon every time I start-up the 2 linux.

Is it right to add this 2 sip number in openser or ser in this way?(they're registered in asterisk and 650 is a number from a X-lite, 651 from Phoner)

serctl add 650  1234      650@192.168.25.200 [mailto: 650@192.168.25.200]
serctl add 651  1234      651@192.168.25.200 [mailto: 651@192.168.25.200]

Is it right this configuration?If the master falls down the slave has all the Sip registration authentificated and run without any problem?

100000 thanks!