Hello,

I’ll go for the remote Ssh idea for now and keep an eye on future releases.

Thank you for your help!

Regards,

Grant

From: sr-users-bounces@lists.sip-router.org [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Charles Chance
Sent: Monday, September 30, 2013 2:57 PM
To: Kamailio (SER) - Users Mailing List
Subject: Re: [SR-Users] Communicate with Kamailio through external application

Hi,

You are not doing anything wrong - on very quick inspection of the code it appears you won't be able to issue the command via the xhttp_rpc module.

So other than changing DB (although I assume you are using MSSQL for a very specific reason), it looks like you may have to stick to the original remote SSH connection idea. Until someone has time and inclination to add the unixodbc support that is.

Unless anyone else can offer some alternative...

Regards,

Charles

On 30 September 2013 08:01, Grant Bagdasarian <GB@cm.nl> wrote:

Hello,

I’ve loaded the mi_rpc module and configured the rpc_url param, but I can’t issue the kamcmd mi ds_reload command from the web interface. Executing the command in the console works just fine, but only when I leave the binrpc modparam as default.

I’m probably doing something wrong.

# ----- xhttp params ------

modparam("xhttp", "url_match", "^/http_rpc")

# ----- xhttp_rpc params ------

modparam("xhttp_rpc", "xhttp_rpc_root", "http_rpc")

# ----- mi_rpc params ------

modparam("mi_rpc","rpc_url","tcp:192.168.1.10:2046")

The mi_rpc documentation says: “rpc_url”. This parameter is required if you need to run RPC commands from the MI. It must match a URL to which the RPC is bound.

Is this referring to the binrpc modparam?

Any tips?

From: sr-users-bounces@lists.sip-router.org [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Charles Chance
Sent: Saturday, September 28, 2013 9:42 AM

To: Kamailio (SER) - Users Mailing List
Subject: Re: [SR-Users] Communicate with Kamailio through external application

Hi,

It would appear then that unixodbc support is not currently available in kamctl directly, so you are in fact limited to MI command ds_reload.

For your case, you could try loading MI_RPC module which exports an additional RPC command: mi.

Then issue your command like:

kamcmd mi ds_reload

If that works for you, then the same command passed via xhttp_rpc should also work.

Cheers,

Charles

_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

www.sipcentric.com

Follow us on twitter @sipcentric

Sipcentric Ltd. Company registered in England & Wales no. 7365592. Registered office: Unit 10 iBIC, Birmingham Science Park, Holt Court South, Birmingham B7 4EJ.