hi all,
Try to use presence feature with MS messager 5.0, seems
SUBSCRIBER can not work.
Can anybody have a look for the attached ser.cfg
?
Many thanks,
hong
----------------------------------
#debug=4 # debug
level (cmd line:
-dddddddddd)
#listen=192.168.8.96
#fork=no
#log_stderror=yes
# (cmd line: -E)
#debug=7
#fork=no
#log_stderror=yes
check_via=no # (cmd. line:
-v)
dns=no #
(cmd. line: -r)
rev_dns=no # (cmd. line:
-R)
port=5060
children=4
fifo="/tmp/ser_fifo"
# ------------------ module loading
----------------------------------
# Uncomment this if you want to use SQL
database
#loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule
"/usr/local/lib/ser/modules/tm.so"
loadmodule
"/usr/local/lib/ser/modules/rr.so"
loadmodule
"/usr/local/lib/ser/modules/maxfwd.so"
loadmodule
"/usr/local/lib/ser/modules/usrloc.so"
loadmodule
"/usr/local/lib/ser/modules/registrar.so"
loadmodule
"/usr/local/lib/ser/modules/pa.so"
# Uncomment this if you want digest authentication
#
mysql.so must be loaded !
#loadmodule
"/usr/local/lib/ser/modules/auth.so"
#loadmodule
"/usr/local/lib/ser/modules/auth_db.so"
# ----------------- setting module-specific parameters
---------------
# -- usrloc params --
modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database
# for
persistent storage and comment the previous line
#modparam("usrloc",
"db_mode", 2)
# -- auth params --
# Uncomment if you are using auth
module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set
"calculate_ha1" parameter to yes (which true in this config),
# uncomment
also the following parameter)
#
#modparam("auth_db", "password_column",
"password")
# -- rr params --
# add value to ;lr param to make some
broken UAs happy
modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing logic
-------------------
# main routing logic
route{
# initial sanity checks --
messages with
# max_forwards==0,
or excessively long requests
if
(!mf_process_maxfwd_header("10"))
{
sl_send_reply("483","Too Many
Hops");
break;
};
if ( msg:len > max_len )
{
sl_send_reply("513", "Message too
big");
break;
};
# we record-route all messages
-- to make sure that
# subsequent
messages will go through our proxy;
that's
# particularly good if
upstream and downstream entities
#
use different transport protocol
record_route();
# loose-route
processing
if (loose_route())
{
t_relay();
break;
};
# if the request is for other
domain use UsrLoc
# (in case, it
does not work, use the following
command
# with proper names and
addresses in it)
if (uri==myself)
{
if (method=="REGISTER") {
# Uncomment this if you want to use digest
authentication
#
if (!www_authorize("iptel.org", "subscriber"))
{
#
www_challenge("iptel.org",
"0");
#
break;
#
};
save("location");
break;
};
if (method=="SUBSCRIBE") {
if (t_newtran())
{
handle_subscription("registrar");
};
break;
};
# native SIP destinations are handled using our USRLOC
DB
if (!lookup("location"))
{
sl_send_reply("404", "Not
Found");
break;
};
};
# forward to current uri now;
use stateful forwarding; that
#
works reliably even if we forward from TCP to
UDP
if (!t_relay())
{
sl_reply_error();
};
}