10 Feb
2016
10 Feb
'16
11:01 p.m.
Hello,
if the client UA does GRUU (iirc, jssip supports that, sip.js started as
a fork of jssip) and you enable that in Kamailio (see registrar module),
it should be enough that the client UA reconnects on websocket for SIP
singaling, no need for re-INVITE, unless the IP/ports for media stream
change. The BYE or other requests within dialog will be routed properly
to the new contact address after the reconnect.
But you have to check with your UA and see how it behaves in order to
build the proper solution on server side.
Cheers,
Daniel
On 10/02/16 20:57, mayamatakeshi wrote:
Hi Daniel,
originally I was thinking that i should just terminate or allow the
dialog module to terminate the call if websocket:closed happens.
However, I believe the sip.js library I am using in the client will do
a re-INVITE after websocket connection is reestablished so that
requests from the other end will come to the right socket so I am
thinking in just reduce the dlg timeout and if the re-INVITE happens,
reset it to its usual value.
I have not checked yet if sip.js does this re-INVITE but I believe it
is reasonable to assume it does and if it doesn't I think it should
not be difficult to patch it to do so.
I will check the other alternatives you mentioned.
Thank you.
Regards,
Takeshi
On Wed, Feb 10, 2016 at 10:23 PM, Daniel-Constantin Mierla
<miconda(a)gmail.com <mailto:miconda@gmail.com>> wrote:
Hello Takeshi,
so do you expect a re-INVITE after the websocket connection is closed?
You may want to check also the dialog keepalive features, it might
just be enough to enable it, but of course it may take longer to
detect when one leg of the call is gone.
Also, typically with PSTN gateways works to set session timers
(see sst module).
Cheers,
Daniel
On 10/02/16 12:27, mayamatakeshi wrote:
--
Daniel-Constantin Mierla
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Book: SIP Routing With Kamailio - http://www.asipto.com
http://miconda.eu
Hi Daniel,
Yes, that will solve it.
Then when i get the in-dialog INVITE i can revert the lifetime
back to the original value.
Thanks and regards,
Takeshi
On Wed, Feb 10, 2016 at 5:59 PM, Daniel-Constantin Mierla
<miconda(a)gmail.com <mailto:miconda@gmail.com>> wrote:
Hello,
perhaps you can just lower the dialog lifetime in the
websocket event route, then dialog will take care of sending
the BYEs, without the need to store additional information in
hash table.
Cheers,
Daniel
On 09/02/16 23:37, mayamatakeshi wrote:
--
Daniel-Constantin Mierla
http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> -
http://www.linkedin.com/in/miconda
Book: SIP Routing With Kamailio - http://www.asipto.com
http://miconda.eu
Hello,
I am using module websocket and it works very well.
However I would like to send BYE to the other end if event
[websocket:closed] happens.
From the docs I can see websocket module itself doesn't
provide for this.
I was considering doing something like this:
- use module htable to match $si:$sp to dialogs
- use event_route[dialog:start] to insert dialog info to
my htable under $si:$sp of Websocket side of the call
- use event_route[dialog:end] to remove dialog info from
htable
- use event_route[websocket:closed] to iterate over
entries in the htable under key $si:$sp and call dlg_get()
and dlg_bye().
Obs: in the above, there is a risk of losing some dialogs as
insertion in htable cannot be done atomically, but I am fine
with it as it it not expected to happen as WebSocket users
would only infrequently generate simultaneous calls.
However before going with this, I would like to ask for
other possible approaches.
Regards,
Takeshi
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
<mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla
http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> -
http://www.linkedin.com/in/miconda
Book: SIP Routing With Kamailio - http://www.asipto.com
http://miconda.eu
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users
mailing list
sr-users(a)lists.sip-router.org
<mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users