Hi
Thank you for your explanation.
What is your suggestions about the setup IMS Core Network for area? I
mean which of the senario is better?
1) All nodes (P/I/S-CSCF and HSS) have public IP Address in IMS Core
Network, While the subscriber just could see PCSCF. In this way we may
use some modules to hide topology, e.g TOPOS module.
2) We have one Public IP Address and one Private IP Address for PCSCF,
While other nodes (I/S-CSCF and HSS) have Private IP Address. In this
way we use Nat modules (or RTP Proxy) for relay RTP. One of major
functionality of nat module is relaying RTP between Public IP address
and Private IP Address in PCSCF node.
Thanks.
Mojtaba Esfandiari.S
On Thu, Jun 22, 2017 at 12:28 AM, Carsten Bock <carsten(a)ng-voice.com> wrote:
Hi,
you can for example buy a Proxy-CSCF from Oracle (the former
AcmePacket NET-NET SBC's), which provides such functionality.
I'm working on a new Version of the config, which supports some more
options here:
1) Use topos, if e.g. no transcoding is needed
2) Use SEMS or Asterisk like before (with some cleanups/optimizations)
When I talk with customers about commercial deployments, they often
refer to Kamailio as a SBC (and since there is no real definition for
a SBC, that's probably valid); since it does most of the things, a SBC
would do (topology hiding, DOS-Attack detection, Limiting,
Header-Manilpulation, Validating of the messages, ...).
For me one of the top-reasons for using either SEMS, Frafos ABC-SBC or
Asterisk is Transcoding & Topology hiding, as almost everything else
can be done on Kamailio too.
Thanks,
Carsten
2017-06-21 13:15 GMT+02:00 Mojtaba <mespio(a)gmail.com>om>:
Hi,
You mean that we should use either SBC or Proxy-CSCF (don't both of
them) as entry point of IMS network? Is it right?
Thank.
Mojtaba Esfandiari.S
On Wed, Jun 21, 2017 at 12:43 PM, Carsten Bock <carsten(a)ng-voice.com> wrote:
Hi,
There is a common scenario, where Kamailio needs to be in front of e.g SEMS:
PCRF Integration for QoS. You need to access the IP of the sender and the
SDP.
You would have to integrate that into SEMS, but if you do, you can actually
drop Kamailio as a Proxy-CSCf completely...
Thanks,
Carsten
Am 21.06.2017 09:48 schrieb "Mojtaba" <mespio(a)gmail.com>om>:
Is it not better to use SEMS as SBC in the front of your network? And
all P/S/I/CSCF have the private IP address.
Thanks
--Mojtaba Esfandiari.S
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
--Mojtaba Esfandiari.S
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Carsten Bock
CEO (Geschäftsführer)
ng-voice GmbH
Millerntorplatz 1
20359 Hamburg / Germany
http://www.ng-voice.com
mailto:carsten@ng-voice.com
Office +49 40 5247593-40
Fax +49 40 5247593-99
Sitz der Gesellschaft: Hamburg
Registergericht: Amtsgericht Hamburg, HRB 120189
Geschäftsführer: Carsten Bock
Ust-ID: DE279344284
Hier finden Sie unsere handelsrechtlichen Pflichtangaben:
http://www.ng-voice.com/imprint/
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users