13 Feb
2020
13 Feb
'20
1:01 a.m.
5.3 yes the patch I had in mine is in.
It seems like what you are doing is fine.
We do not see the definition of your FLAGS in you example I am assuming
they are not overlapping another flag "bit" that could be used by another
module etc.
There could be a concern that the same flag as multiple purpose and
alias/definition.
By reset I meant calling setflag multiple times :
modparam("acc", "log_missed_flag", 12)
...
setflag(12)
On Wed, Feb 12, 2020 at 1:07 PM Voip support <voipexpert0(a)gmail.com> wrote:
I have this code in very beginning of Request route of
kamailio.cfg
# handle retransmissions
if (!is_method("ACK")) {
if(t_precheck_trans()) {
t_check_trans();
exit;
}
t_check_trans();
}
I think its left from the default config - i changed only few things in
default config to add calls per second limit / dispatcher some routing
logic but nothing more and set the flags for ACC module to save.
śr., 12 lut 2020 o 22:03 Voip support <voipexpert0(a)gmail.com> napisał(a):
I am using kamailio 5.3 from debian (installed in
ubuntu 16.04)
repository.
Could you please explain bit more what flag to reset call-id you mean.
What does the code you pasted, where it should be in kamailio.cfg?
Thanks upfront for explanation!
Regards,
Tom
śr., 12 lut 2020 o 17:11 Julien Chavanton <jchavanton(a)gmail.com>
napisał(a):
Kamailio (SER) - Users
Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
The flag will prevent duplicates. Which version
are you using, there was
a patch a few months ago
The explanation shold be that you are resetting them.
Are you using the following, one option to confirm that your logic is
good is add one log line at INFO / NOTICE level logging each time you reset
the flag including the call-id :
if (t_precheck_trans()) {
t_check_trans();
exit;
}
On Wed, Feb 12, 2020 at 4:13 AM Voip support <voipexpert0(a)gmail.com>
wrote:
_______________________________________________ Dear Community,
I have setup ACCDB module to save missed / failed and successful calls.
My issue is that i am getting duplicated entries for INVITE / BYE in
acc database table.
For example:
id;method;from_tag;to_tag;callid;sip_code;sip_reason;time;src_ip;dst_user;dst_domain;src_user;src_domain;cdr_id
231838;INVITE;21-7FC1D85;1914472180948750;KKyIdaaJceAu7pzN(a)172.16.0.35;200;OK;2020-02-11
19:16:28;22.33.44.55;nlb124#78019989897056;11.11.11.11;asterisk;172.16.0.35;0
231839;INVITE;21-7FC1D85;1914472180948750;KKyIdaaJceAu7pzN(a)172.16.0.35;200;OK;2020-02-11
19:16:28;22.33.44.55;nlb124#78019989897056;11.11.11.11;asterisk;172.16.0.35;0
231840;INVITE;21-7FC1D85;1914472180948750;KKyIdaaJceAu7pzN(a)172.16.0.35;200;OK;2020-02-11
19:16:28;22.33.44.55;nlb124#78019989897056;11.11.11.11;asterisk;172.16.0.35;0
231841;BYE;21-7FC1D85;1914472180948750;KKyIdaaJceAu7pzN(a)172.16.0.35;200;OK;2020-02-11
19:16:36;22.33.44.55;;190.196.153.130;asterisk;172.16.0.35;0
231842;BYE;21-7FC1D85;1914472180948750;KKyIdaaJceAu7pzN(a)172.16.0.35;200;OK;2020-02-11
19:16:36;22.33.44.55;;190.196.153.130;asterisk;172.16.0.35;0
231844;BYE;21-7FC1D85;1914472180948750;KKyIdaaJceAu7pzN(a)172.16.0.35;200;OK;2020-02-11
19:16:36;22.33.44.55;;190.196.153.130;asterisk;172.16.0.35;0
Following way:
# ----- acc params -----
/* what special events should be accounted ? */
modparam("acc", "early_media", 0)
modparam("acc", "report_ack", 0)
modparam("acc", "report_cancels", 0)
/* by default ww do not adjust the direct of the sequential requests.
* if you enable this parameter, be sure the enable "append_fromtag"
* in "rr" module */
modparam("acc", "detect_direction", 0)
/* account triggers (flags) */
modparam("acc", "log_flag", FLT_ACC)
modparam("acc", "log_missed_flag", FLT_ACCMISSED)
modparam("acc", "log_extra",
"src_user=$fU;src_domain=$fd;src_ip=$si;"
"dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
modparam("acc", "failed_transaction_flag", FLT_ACCFAILED)
/* enhanced DB accounting */
#!ifdef WITH_ACCDB
modparam("acc", "db_flag", FLT_ACC)
modparam("acc", "db_missed_flag", FLT_ACCMISSED)
modparam("acc", "db_url", DBURL)
#modparam("acc", "db_extra",
# "src_user=$fU;src_domain=$fd;src_ip=$si;"
# "dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
modparam("acc", "db_extra",
"src_user=$fU;src_domain=$fd;dst_user=$rU;dst_domain=$rd;src_ip=$si")
# our lines
modparam("acc", "cdrs_table", "acc_cdrs")
modparam("acc", "cdr_on_failed", 1)
#!endif
Then in routing config i set setflag(FLT_ACC FLT_ACCMISSED
FLT_ACCFAILED in several places.
My question is - each setflag cause an entry to be saved in DB?
How can i debug and resolve the issue of duplicates.
I am trying to use a CDR script found somewhere on siremis sites to do
the accounting but it's making trouble because due to duplicates in acc
table i am getting cdrs unique key violations.
Secondary question is - if a BYE is not received / lost is there any
way to send a check triggered by kamailio to each caller and callee side to
check if dialog is still active.
I would not like to use session timers (as endpoints need to support
it).
Best regards,
Tom
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users