#

# $Id: openser.cfg,v 1.5 2005/10/28 19:45:33 bogdan_iancu Exp $

#

# simple quick-start config script

#

 

# ----------- global configuration parameters ------------------------

 

debug=3            # debug level (cmd line: -dddddddddd)

fork=yes

log_stderror=no    # (cmd line: -E)

 

/* Uncomment these lines to enter debugging mode

fork=no

log_stderror=yes

*/

 

check_via=no    # (cmd. line: -v)

dns=no          # (cmd. line: -r)

rev_dns=no      # (cmd. line: -R)

port=5060

children=4

fifo="/tmp/openser_fifo"

 

#

# uncomment the following lines for TLS support

#disable_tls = 0

#listen = tls:your_IP:5061

#tls_verify = 1

#tls_require_certificate = 0

#tls_method = TLSv1

#tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem"

#tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem"

#tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem"

 

# ------------------ module loading ----------------------------------

 

# Uncomment this if you want to use SQL database

#loadmodule "/usr/local/lib/openser/modules/mysql.so"

 

loadmodule "/usr/local/lib/openser/modules/sl.so"

loadmodule "/usr/local/lib/openser/modules/tm.so"

loadmodule "/usr/local/lib/openser/modules/rr.so"

loadmodule "/usr/local/lib/openser/modules/maxfwd.so"

loadmodule "/usr/local/lib/openser/modules/usrloc.so"

loadmodule "/usr/local/lib/openser/modules/registrar.so"

loadmodule "/usr/local/lib/openser/modules/textops.so"

 

# Uncomment this if you want digest authentication

# mysql.so must be loaded !

#loadmodule "/usr/local/lib/openser/modules/auth.so"

#loadmodule "/usr/local/lib/openser/modules/auth_db.so"

 

# ----------------- setting module-specific parameters ---------------

 

# -- usrloc params --

 

modparam("usrloc", "db_mode",   0)

 

# Uncomment this if you want to use SQL database

# for persistent storage and comment the previous line

#modparam("usrloc", "db_mode", 2)

 

# -- auth params --

# Uncomment if you are using auth module

#

#modparam("auth_db", "calculate_ha1", yes)

#

# If you set "calculate_ha1" parameter to yes (which true in this config),

# uncomment also the following parameter)

#

#modparam("auth_db", "password_column", "password")

 

# -- rr params --

# add value to ;lr param to make some broken UAs happy

modparam("rr", "enable_full_lr", 1)

 

# -------------------------  request routing logic -------------------

 

# main routing logic

 

route{

 

        # initial sanity checks -- messages with

        # max_forwards==0, or excessively long requests

        if (!mf_process_maxfwd_header("10")) {

                sl_send_reply("483","Too Many Hops");

                exit;

        };

 

        if (msg:len >=  2048 ) {

                sl_send_reply("513", "Message too big");

                exit;

        };

 

        # we record-route all messages -- to make sure that

        # subsequent messages will go through our proxy; that's

        # particularly good if upstream and downstream entities

        # use different transport protocol

        if (!method=="REGISTER")

                record_route();

 

        # subsequent messages withing a dialog should take the

        # path determined by record-routing

        if (loose_route()) {

                # mark routing logic in request

                append_hf("P-hint: rr-enforced\r\n");

                route(1);

        };

 

        if (!uri==myself) {

                # mark routing logic in request

                append_hf("P-hint: outbound\r\n");

                # if you have some interdomain connections via TLS

                #if(uri=~"@tls_domain1.net") {

                #       t_relay_to_tls("IP_domain1","port_domain1");

                #       exit;

                #} else if(uri=~"@tls_domain2.net") {

                #       t_relay_to_tls("IP_domain2","port_domain2");

                #       exit;

                #}

                route(1);

        };

 

        # if the request is for other domain use UsrLoc

        # (in case, it does not work, use the following command

        # with proper names and addresses in it)

        if (uri==myself) {

 

                if (method=="REGISTER") {

 

                        # Uncomment this if you want to use digest authentication

                        #if (!www_authorize("openser.org", "subscriber")) {

                        #       www_challenge("openser.org", "0");

                        #       exit;

                        #};

 

                        save("location");

                        exit;

                };

 

                lookup("aliases");

                if (!uri==myself) {

                        append_hf("P-hint: outbound alias\r\n");

                        route(1);

                };

 

                # native SIP destinations are handled using our USRLOC DB

                if (!lookup("location")) {

                        sl_send_reply("404", "Not Found");

                        exit;

                };

                append_hf("P-hint: usrloc applied\r\n");

        };

 

        route(1);

}

 

 

route[1] {

        # send it out now; use stateful forwarding as it works reliably

        # even for UDP2TCP

        if (!t_relay()) {

                sl_reply_error();

        };

        exit;

}

 

 


From: ram [mailto:talk2ram@gmail.com]
Sent: Friday, June 09, 2006 1:33 AM
To: Kelvin Williams
Subject: Re: [Users] openserctl error.

 

post ur config file to assist

 

ram

 

On 6/9/06, Kelvin Williams <kelvin-lists@williamschadwell.com> wrote:

This is a new OpenSER installation on a Solaris 10 box. 

 

Any time we call openserctl we receive the following error:

 

/usr/local/sbin/openserctl: syntax error at line 1026: `GW_IP=$' unexpected

 

Line 26 of openserctl reads:

 

GW_IP=$(($1+$2*256+$3*65536+$4*16777216))

 

Any advice would be greatly appreciated!

 

Thanks,

kw

 


_______________________________________________
Users mailing list
Users@openser.org
http://openser.org/cgi-bin/mailman/listinfo/users