Hi Daniel,
Just a quick update, I remove the rport from sipML5 request and I still see Kamailio adding the "received=<Proxy IP Address>" field into Via at SIP level. I found textops module to remove this parameter is this a good idea?
On the other side, Via header at WS level is inserted, not sure if this is expected for Websockets.
Thanks so much Daniel
-Gonzalo
On Tue, Oct 7, 2014 at 1:57 AM, Gonzalo Gasca gascagonzalo@gmail.com wrote:
Hi Daniel,
I see the "Via" header in both initial Websocket upgrade response (101) and in SIP 200 OK from Kamailio when Sipml5 client is registering.
At SIP level including rport in initial REGISTER message from client and getting a "received" field from Kamailio makes sense and I will use your recommended solution.
When I look at this Section: https://tools.ietf.org/html/rfc7118#section-5.3
I have WSS at client level hence I expect users not to see WS messages including the "received" field but... I'm wondering if in the case of WS(Not secure), Kamailio replying to the 101 WS using Via header may reveal inside information and if it is possible to change this?
Protocols\r\n] [Message: HTTP/1.1 101 Switching Protocols\r\n] [Severity level: Chat] [Group: Sequence] Request Version: HTTP/1.1 Status Code: 101 Response Phrase: Switching Protocols --> Via: SIP/2.0/TCP 172.31.22.2:37137\r\n
Thanks Daniel
-Gonzalo
On Tue, Oct 7, 2014 at 12:01 AM, Daniel-Constantin Mierla miconda@gmail.com wrote:
Do you refer to the http response only? Or to SIP as well?
Daniel
On 07/10/14 06:19, Gonzalo Gasca wrote:
Daniel, I will re-write it in Kamailio, seems to be that during initial WS negotiation (HTTP Connection Upgrade), Kamailio is already including the Via header:
Via: SIP/2.0/TCP 172.31.22.2:37137\r\nWhich as you said is perfectly fine, Im just trying to hide my info.
Thanks -Gonzalo
No. Time Source Destination Protocol Length Info 13 21:00:41.016 172.31.22.2 172.31.27.85 HTTP 814 GET / HTTP/1.1
Frame 13: 814 bytes on wire (6512 bits), 814 bytes captured (6512 bits) Ethernet II, Src: 06:17:4e:87:69:98 (06:17:4e:87:69:98), Dst: 06:79:4f:ef:e3:d6 (06:79:4f:ef:e3:d6) Internet Protocol Version 4, Src: 172.31.22.2 (172.31.22.2), Dst: 172.31.27.85 (172.31.27.85) Transmission Control Protocol, Src Port: 37137 (37137), Dst Port: na-localise (5062), Seq: 1, Ack: 1, Len: 748 Hypertext Transfer Protocol GET / HTTP/1.1\r\n [Expert Info (Chat/Sequence): GET / HTTP/1.1\r\n] Request Method: GET Request URI: / Request Version: HTTP/1.1 Host: ramenlabs.io:5062\r\n Upgrade: websocket\r\n Connection: Upgrade\r\n Pragma: no-cache\r\n Cache-Control: no-cache\r\n Origin: https://www.ramenlabs.io%5Cr%5Cn Sec-WebSocket-Version: 13\r\n User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_9_4) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/40.0.2180.0 Safari/537.36\r\n Accept-Encoding: gzip, deflate, sdch\r\n Accept-Language: en-US,en;q=0.8\r\n Cookie: __utmt=1; __utma=257296520.931028039.1410155955.1412651114.1412653901.42; __utmb=257296520.1.10.1412653901; __utmc=257296520;
__utmz=257296520.1410155955.1.1.utmcsr=(direct)|utmccn=(direct)|utmcmd=(none)\r\n Sec-WebSocket-Key: QR+qynpQ7+7psMScB/WkQQ==\r\n Sec-WebSocket-Extensions: permessage-deflate; client_max_window_bits\r\n Sec-WebSocket-Protocol: sip\r\n \r\n [Full request URI: http://ramenlabs.io:5062/]
No. Time Source Destination Protocol Length Info 15 21:00:41.017 172.31.27.85 172.31.22.2 HTTP 314 HTTP/1.1 101 Switching Protocols
Frame 15: 314 bytes on wire (2512 bits), 314 bytes captured (2512 bits) Ethernet II, Src: 06:79:4f:ef:e3:d6 (06:79:4f:ef:e3:d6), Dst: 06:17:4e:87:69:98 (06:17:4e:87:69:98) Internet Protocol Version 4, Src: 172.31.27.85 (172.31.27.85), Dst: 172.31.22.2 (172.31.22.2) Transmission Control Protocol, Src Port: na-localise (5062), Dst Port: 37137 (37137), Seq: 1, Ack: 749, Len: 248 Hypertext Transfer Protocol HTTP/1.1 101 Switching Protocols\r\n [Expert Info (Chat/Sequence): HTTP/1.1 101 Switching Protocols\r\n] [Message: HTTP/1.1 101 Switching Protocols\r\n] [Severity level: Chat] [Group: Sequence] Request Version: HTTP/1.1 Status Code: 101 Response Phrase: Switching Protocols Via: SIP/2.0/TCP 172.31.22.2:37137\r\n Sec-WebSocket-Protocol: sip\r\n Upgrade: websocket\r\n Connection: upgrade\r\n Sec-WebSocket-Accept: rb6Ng4aiTHNyZatk74btU9vZNPk=\r\n Server: Llamato SipRegistrar(1.0)\r\n Content-Length: 0\r\n \r\n
On Mon, Oct 6, 2014 at 1:06 AM, Daniel-Constantin Mierla miconda@gmail.com wrote:
Hello,
received is added because the client requests that via rport parameter or because of using rport. If the processed request is REGISTER, you can try removing rport/received parameters from Via, then do msg_apply_changes().
However, without rport enforcement, the response might not be routed back, because SIP says to send it back to the address in Via, which is invalid in websocket case.
Maybe you can rewrite headers in nginx or use kamailio as a proxy/load balancer instead of nginx and then you have plenty of options to play with sip headers.
Cheers, Daniel
On 06/10/14 02:39, Gonzalo Gasca wrote:
I'm using Kamailio as SIP Registrar using Websockets. My topology looks like this:
Sip client (sipml5) ---> wss ---> Nginx ---> ws ---> Kamailio 4.1.5
When I look into my SipMl5 application in the Register Message 200 OK from Kamailio I see the Nginx private IP address 172.31.22.2
Via: SIP/2.0/WSS
df7jal23ls0d.invalid;rport=37111;received=172.31.22.2;branch=z9hG4bKtv75otkzmPVsdNWevweLt4TN9JnLnQ0p
How can I remove private IP Address in Via header to achieve topology hiding?
From Kamailio logs:
Oct 6 00:34:21 ip-172-31-27-85 /usr/sbin/kamailio[8941]: DEBUG: registrar [reply.c:374]: build_contact(): created Contact HF: Contact:
sips:gogasca@df7jal23ls0d.invalid;rtcweb-breaker=no;transport=wss;expires=200#015#012 Oct 6 00:34:21 ip-172-31-27-85 /usr/sbin/kamailio[8941]: DEBUG: sl [sl.c:288]: send_reply(): reply in stateless mode (sl) Oct 6 00:34:21 ip-172-31-27-85 /usr/sbin/kamailio[8941]: DEBUG: <core> [msg_translator.c:204]: check_via_address(): check_via_address(172.31.22.2, df7jal23ls0d.invalid, 0) O
Version: kamailio 4.1.5 (x86_64/linux)
# ------ topoh --------
modparam("topoh", "mask_key", "opencall") modparam("topoh", "mask_ip", "<Public IP Address of Kamailio>") modparam("topoh", "vparam_prefix", "llamato") modparam("topoh", "mask_callid", 1) modparam("topoh", "sanity_checks", 1)
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda