Hi Anca,
Thanks for the quick reply. I wondered a little about the phones, too. Alan sent me a note privately, very tactfully reminding me that I'd sent less phone information than I should have.
The Polycom 650: bootrom.ld version: 3.2.3.0002 sip version: 2.1.2.0078
The Polycom 330: bootrom.lod verion: 3.2.3.0021 sip version: 2.1.2.0049
Both phone.cfgs are attached, as well ngrep traces from reboots. I did two traces, rebooting each phone separately.
Again, I appreciate the help very much. Thanks.
- Jeremy
-----Original Message----- From: Anca-Maria Vamanu [mailto:anca@voice-system.ro] Sent: Thursday, July 12, 2007 08:18 AM To: 'Jeremy George' Cc: users@openser.org Subject: Re: [OpenSER-Users] BLA errors
Hello,
The implementation of the bla extension has been done according to the specifications in draft-anil-sipping-bla-03.txt, and tested with Polycom 430. Since we received positive feedback from users impementing BLA, I am thinking that the phones you use have a different behaviour and that here is the cause of the errors. To detect the exact cause I would need some more data. Could you send me a part of the log , after starting openser and the first phones registers, subscribes and is sent a Notify?
regards,
Anca Vamanu
Jeremy George wrote:
Hello All,
I have BLA implemented, with errors. An ngrep trace of relevant packets showing errors follows. The configurations of both main proxy and bla presence server are attached.
I stripped the main proxy to the bone. No outside routing at all. The bla presence server is almost all from the sample.
75.56.10.115 is a Cisco 7960 with one line registered: jeremy/private 75.56.10.116 is a Polycom 650 with two lines registered: jessica/private and helen/shared 75.56.10.117 is a Polycom 330 with two lines registered: didama/private and helen/shared 128.91.3.19 is the main proxy running openser v1.2.1 . 128.91.2.215 is the bla presence server running openser svn 2413 .
This error: "1(1184) PUA:subs_cback_func: no reply message found" is being produced repeatedly on the bla presence server.
Finally, I'm getting these error messages on the bla presence server:
0(1284) PUA_BLA: handle_notify: ERROR Notify in a non existing dialog 0(1284) WARNING: script writer didn't release transaction
From time-to-time pua entries eat all of available memory. Curiously, they were all for the Polycom 330 and none were for the Polycom 650.
Any help is greatly appreciated. Thanks.
- Jeremy