Hi,

I've captured debug logs by suggestion of Mr. Michal Matyska.
Attached I'm sending them to you. I hope it reaches you.
Please look for the "no socket found" and "Can't send watcherinfo notification " lines in the log as it's too long.

Thanks,
ilker

-----Original Message-----
From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org]
Sent: Tuesday, May 02, 2006 12:28 PM
To: İlker Aktuna (Koç.net)
Cc: serusers@lists.iptel.org
Subject: Re: [Serusers] IM and presence problems

You don't need anything else. Are you sure that changed config is used by ser (you can try to add a mistake there, if SER will complain in startup or not)?
        Vaclav

On Tue, May 02, 2006 at 12:24:59PM +0300, ?lker Aktuna (Koç.net) wrote:
> Hi,
>
> I changed it to "debug=4" and restarted ser but nothing changed.
> Is there anything missing in my configuration ? Do I need a seperate module for debug messages ?
>
> Thanks,
> ilker
>
> -----Original Message-----
> From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org]
> Sent: Tuesday, May 02, 2006 12:15 PM
> To: ?lker Aktuna (Koç.net)
> Cc: serusers@lists.iptel.org
> Subject: Re: [Serusers] IM and presence problems
>
> Hi,
> debug=4 should be enough. And if you restart ser with this debug level, there should be really lots of messages in the log.
>
> If you have another proxy doing NAT it is probably not needed to do it on presence server (and if oter messages work like MESSAGE).
>         Vaclav
>
> On Tue, May 02, 2006 at 11:39:01AM +0300, ?lker Aktuna (Koç.net) wrote:
> > Hi,
> >
> > Which level of debug should I use ?
> > debug= ?  (I tried debug=7 but nothing changed)
> >
> > Btw, my clients are behind NAT. But I already forward them to an RTP+SIP proxy for voice communication. And there is no rpoblem with voice.
> > Should I use any nathelper configuration for presence messages ?
> >
> > Thanks,
> > ilker
> >
> > -----Original Message-----
> > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org]
> > Sent: Tuesday, May 02, 2006 11:23 AM
> > To: ?lker Aktuna (Koç.net)
> > Cc: serusers@lists.iptel.org
> > Subject: Re: [Serusers] IM and presence problems
> >
> > I think, that this problem is not caused by absence of unixsock or unconfigured fifo module.
> >
> > Have you restarted ser after changing debug level (debug=xxx in cfg)?
> > There should be lots of messages.
> >
> >         Vaclav
> >
> > On Tue, May 02, 2006 at 10:49:22AM +0300, ?lker Aktuna (Koç.net) wrote:
> > > Hi,
> > >
> > > Do you think that I need  unixsock module ?
> > > Also, do I need any configuration for fifo module ?
> > >
> > > I'm now using the CVS version and with full configuration in the presence handbook.
> > > Everything seems to work except presence messages.
> > >
> > > After increasing the loglevel to 7 there is no more information in the log.
> > > Only these lines:
> > >
> > > May  2 10:56:49 sesapp /root/ser/sbin/ser[18655]: t_uac: no socket
> > > found May  2 10:56:49 sesapp /root/ser/sbin/ser[18655]: ERROR:
> > > notify.c:398: Can't send watcherinfo notification (-7) May  2
> > > 10:56:49 sesapp /root/ser/sbin/ser[18655]: send_winfo_notify
> > > returned -7 May  2
> > > 10:56:49 sesapp /root/ser/sbin/ser[18649]: t_uac: no socket found
> > > May
> > > 2 10:56:49 sesapp /root/ser/sbin/ser[18655]: t_uac: no socket
> > > found
> > >
> > > If it would help , I can send you my full configuration.
> > > I need help desperately.
> > >
> > > Regards,
> > > ilker
> > >
> > > -----Original Message-----
> > > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org]
> > > Sent: Tuesday, May 02, 2006 10:09 AM
> > > To: ?lker Aktuna (Koç.net)
> > > Cc: serusers@lists.iptel.org
> > > Subject: Re: [Serusers] IM and presence problems
> > >
> > > Hi,
> > > as I can see from the dump - MESSAGEs go through without problems, right?
> > > Try to increase debug level in config file, might be, you will see more.
> > > I don't see any problems... :-(
> > >
> > >         Vaclav
> > >
> > > On Fri, Apr 28, 2006 at 03:32:24PM +0300, ?lker Aktuna (Koç.net) wrote:
> > > > Hi Vaclav,
> > > >
> > > > I've installed ngrep and sending you ngrep output.
> > > >
> > > > "t_uac: no socket found" error is occuring in nearly all of the events.
> > > > Should I use unixsock module ? If yes, what are the needed parameters ?
> > > > Currently fifo module is loaded. Should I use it also ?
> > > >
> > > > For problem 2 ; you are right. I am using Eyebeam. Then I'll ignore this error.
> > > >
> > > > Thanks for your help.
> > > >
> > > > ilker
>