3 May
2020
3 May
'20
10:15 p.m.
the problem with Aserisk realtime and the kamailio dispatcher integration,
are the string ip comparitions. The guide points out two important routines,
which are FROMASTERISK and TOASTERISK, in these it is verified if the
request acts from asterisk, or goes to asterisk.
But are another routine that are also important, es la REGFWD
I was able to adjust these routines (mediocre, because I only check
if it comes from one of the asterisks on the list and not the one in question),
but in the REGFWD rules, the code are bit confusing..
i made this:
1) follow the normal guideliness ... enable the module by addiding the
loadmodule "dispatcher.so" and later specify source list/db by
modparam("dispatcher", "list_file",
"/etc/kamailio/dispatcher.list")
etc etc .. and adde a rule "route[DISPATCH]" of course. ..
2) later i sustitute the rutines of FROMASTERISK and TOASTERISK by that code:
route[FROMASTERISK] {
if(ds_is_from_list()){
return 1;
}
return -1;
}
route[TOASTERISK] {
ds_mark_dst("P");
if(!ds_select_dst("1", "2")) { # i have only 2 sterisk in
list
sl_send_reply("500", "Service Unavailable");
exit;
}
route(RELAY);
exit;
}
And that'sall.. but:
NOTE. the code on TOASTERISK exit if service are unavailable,, i have
doubs about that, due i assume that if does not return (noted the "!"
in the contidional) from the list.. there's no way to deliver to a
asterisk.. so exit,cos i not have enought xpertise to propety code a
subrutine that waiths to an asterisk to be available!
HERE THE LAST PROBLEM:
taken from the asterisk realtime guide, just almost at the lasted
lines of the kamailio.cfg this is the code part that i cannot or i
does not have enoought knowledge to translate that rules
to the dispatcher ruling.. there are the code:
route[REGFWD] {
if(!is_method("REGISTER"))
{
return;
}
$var(rip) = $sel(cfg_get.asterisk.bindip);
$uac_req(method)="REGISTER";
$uac_req(ruri)="sip:" + $var(rip) + ":" +
$sel(cfg_get.asterisk.bindport);
$uac_req(furi)="sip:" + $au + "@" + $var(rip);
$uac_req(turi)="sip:" + $au + "@" + $var(rip);
$uac_req(hdrs)="Contact: <sip:" + $au + "@"
+ $sel(cfg_get.kamailio.bindip)
+ ":" + $sel(cfg_get.kamailio.bindport) + ">\r\n";
if($sel(contact.expires) != $null)
$uac_req(hdrs)= $uac_req(hdrs) + "Expires: " + $sel(contact.expires) +
"\r\n";
else
$uac_req(hdrs)= $uac_req(hdrs) + "Expires: " + $hdr(Expires) +
"\r\n";
uac_req_send();
}
2020-04-22 19:59 GMT-04:00, ospos web <osposweb(a)gmail.com>om>:
Hi all folks, Hello people, I'm new and I've
been reading, so I have
some but not much knowledge.
I must integrate as work, two asterisk to the kamailio, a month ago I
started with the real time guide [1] with only one kamailio, register,
start the call, etc.. I am with the basics and it works.
Now I must put two asterisk and using dispatcher, but although I read
the documentation of the module.. use it and so then configure a list
of file (with the asterisk where to dispatch) and not in the
database..
MY HELP REQUEST QUESTION: How do I use dispatcher in load balancing
mode, but taking in consideration my already working realtime-asterisk
worling setup?
THE PROBLEM: since with what I did it simply sends the call to both
asterisk. i setup only 4 easy steps.. load module, then setup params
(where i set the asterisk lists by file, and not db) and then added a
"ds_select_dst(1, 4);" before the "route(RELAY);" line. please help!
as i know.. the ds_select_dst(1, 4); prepare wicht asterisk will be
choose to use and then when the routing RELAY happends no cares if in
the realtime previously guide are a main asterisk? right?
NOTE: I know it's a big world... but I can't keep reading the kamailio
theory, i must goon forward due i have to lear later once are property
working..
[1]
https://kb.asipto.com/asterisk:realtime:kamailio-4.0.x-asterisk-11.3.0-astdb
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Lenz McKAY Gerardo (PICCORO)
http://qgqlochekone.blogspot.com